http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
유병현(Byung-Hyun Ryu),진현우(Hyun-Woo Jin),이장근(Jangguen Lee) 한국지반환경공학회 2016 한국지반환경공학회논문집 Vol.17 No.6
최근 들어 우리나라에 이상한파가 자주 발생하고 있으며, 이로 인해 지반에서는 동상에 따른 도로, 철도, 사면과 같은 구조물을 대상으로 지반변형에 따른 문제가 야기되고 있다. 동상현상은 가장 대표적인 동토지반의 공학적 특성으로, 구조물 설계에 있어서 동착 및 크리프 현상과 함께 주요한 설계정수로서 고려된다. 그러므로 극한지 지반구조물 설계에 관한 연구를 위해서는 동상현상에 대한 기초적 연구가 선행되어야 한다. 이미 다양한 동상 관련 실험장비가 개발되어 연구에 활용되고 있지만, 기존의 동상 연구를 위한 실험장비들은 기초의 설계정수로서 동상현상을 분석하기에는 한계점이 나타난다고 판단된다. 국내에는 동상을 실험적 모사하기에는 필요한 장치와 냉동챔버의 고비용으로 시험방법 및 기준이 전무한 실정이다. 이에 본 논문에서는 다양한 방법으로 동결-융해를 모사할 수 있는 투명 온도제어형 삼축셀 을 소개하고자 한다. 새롭게 개발된 동결-융해 실험장치를 활용해 동상 실내실험을 수행하였으며, 본 장치를 활용한 실내실험법을 제안하고자 한다. Nowadays abnormal coldness happens frequently in Korea and frost heaving causes unexpected ground deformation which results in severe problems for structures such as roadway, railroad and cutoff slope. ‘Frost heave’ as one of the primary phenomenon is considered to be an important factor together with ‘adfreeze bond-strength’ and ‘creep deformation’ for structural design process in permafrost area. Therefore, the fundamental study for frost heave has to be preceded for design of geo-structures in cold region. While various experimental apparatuses have been developed, there still exist a certain level of limitation to evaluate the frost-heave characteristics as design parameters. There are no standard testing method and criteria for analyzing frost heaving in Korea because temperature controlled testing apparatuses including a freezing chamber are expensive. In this paper, a new standard freezing and thawing testing apparatus is introduced, which simulates various freezing and thawing conditions in a soil specimen by using a temperature controlled triaxial cell. Frost heaving tests were performed to assess the new testing apparatus and experimental procedure to evaluate frost heaving for soils is proposed.
유병현(Byung-Hyun Ryu),강재모(Jae-Mo Kang),이장근(Jangguen Lee),김영삼(Young-Sam Kim),주낙봉(Rak-Bong Joo) 한국지반환경공학회 2016 한국지반환경공학회논문집 Vol.17 No.9
최근 사회기반시설의 안전설계 용량을 초과하는 잦은 위험기상 등으로 자연재난의 빈도가 증가하고 피해규모도 대형화되고 있으며, 도시화 진전에 따른 시설의 고층화 · 노후건축물 증가와 세계화에 따른 유동인구 및 물류 증가 등이 신종 · 복합 재난을 가중시키는 요인으로 작용하고 있다. 첨단 과학기술을 활용하여 재난위험 사전 감지, 실시간 정보분석, 재난현장에 대한 신속한 대응이 가능하지만, 매몰자 긴급구호에 필요한 시공에서는 반드시 검증된 기술을 활용해야 함에도 불구하고 현장 시험시공을 통한 검증은 미흡하다. 본 연구에서는 도심지 시설물 붕괴 재난 사고 발생 시 매몰지점에 고립된 피구호자를 대상으로 골든타임인 72시간 이내에 식수 및 구호품을 신속하게 공급하기 위한 1차 생명선 설치와 철근 콘크리트 구조체 굴착 성능을 평가하는 데 목적이 있다. Unusual extreme weather events, which exceed a safe design capacity of the infrastructure, increase the frequency of natural disasters and has also been enlarged damage scale. Aging buildings and rapid urban progress act as weighting factors for the new composite disasters. Technological advances support detecting pre-disaster risk, real-time data analysis, and rapid response to the disaster site, but it is insufficient that emergency relief for buried alive must take advantage of the proven technologies through field tests. This study aims to evaluate directional drilling performance through underground soils and the reinforced concrete structure for primary lifeline installation in order to quickly provide relief supplies for buried alive when urban structures collapse.
미세균열 그라우팅 주입성능 및 재료의 점도 측정방법 평가
진현우,유병현,이장근,Jin, Hyun-Woo,Ryu, Byung-Hyun,Lee, Jang-Guen 한국지반공학회 2017 한국지반공학회논문집 Vol.33 No.9
도심지 지하공간 개발을 위해서는 안정성 확보를 위해 암반 또는 암주의 미세균열까지도 보강해야 한다. 본 논문에서는 그라우팅 재료의 점도 및 입경, 주입압력, 균열 폭 등을 고려한 미세균열 그라우팅의 주입성능에 대한 연구를 수행하였다. 미세균열 보강에 사용되는 대표적인 그라우팅 재료는 용액형인 약액형 그라우팅 재료와 현탁액형인 시멘트계 그라우팅 재료가 있다. 약액형 그라우팅 재료와 시멘트계 그라우팅 재료의 주입성능은 공통적으로 점도에 영향을 받으며, 시멘트계 그라우팅 재료의 주입성능은 추가적으로 주입 재료의 입경에 영향을 받는다. 실내실험을 통해 점도를 역계산하여 재료별로 적합한 점도 측정 방법을 제시하였고, 균열 폭과 재료의 입경 간의 관계를 이용한 groutability ratio로 시멘트계 그라우팅 재료의 그라우팅 가능여부를 평가하였다. In order to develop urban underground spaces, even microcracks should be reinforced. In this paper, the grouting injection performance for microcracks was investigated considering the viscosity and particle size of the grouting materials, injection pressure, and crack width. There are two types of typical grouting materials used for filling micro-cracks. One is a chemical liquid grouting material which is a solution type and the other is a cementitious grouting material which is a suspension type. The injection performance of the grouting materials for microcracks is generally influenced by the viscosity, and the injection performance of the cementitious grouting material is additionally affected by the particle size. From laboratory tests, the viscosity was calculated inversely to provide a suitable viscosity measurement method for each grouting material. The groutability ratio based on the relationship between the crack width and the particle size was evaluated to estimate the grouting feasibility of the cementitous grouting material through microcracks.