http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김호석(Hoseok Kim),강보람(Boram Kang),홍봉근(Bongguen Hong) 한국추진공학회 2016 한국추진공학회 학술대회논문집 Vol.2016 No.12
탄소복합재는 고강도, 초경량, 열적 치수 안전성, 내열, 내약품성 및 우수한 열, 전기 전도도 등의 특성으로 다양한 산업 분야에서 활용되고 있다. 특히 가볍고, 강하며, 고온 환경에 우수한 특성이 필요한 항공분야에서 다양한 부품에 적용하고 있다. 본 연구에서는 탄소복합재 제조 공정을 달리한 3종의 시편을 VKI(von Karman Institute for Fluid Dynamics)의 ICP 플라즈마 풍동(400 kHz, 1.2MW)에서 삭마 시험 후 비접촉식 3D 표면 측정 시스템으로 측정한 3D 스캐닝 데이터를 활용하여 삭마 특성을 연구하였다. Carbon fiber composites are various industries to applications where high strength, ultra light, thermal dimensional stability, heat resistance, chemical resistance and excellent heat and electric conductivity characteristics. Especially, it is applied to various parts in aerospace which needs light, strong, and excellent characteristics in high temperature environment. In this study, three kinds of specimens with different carbon fiber composite manufacturing processes carried out ablation test using the ICP plasma wind tunnel (400 kHz, 1.2 MW) of VKI (von Karman Institute for Fluid Dynamics). Also, studied the characteristics of ablation using 3D scanning data measured by non-contact 3D surface measurement system.
김민호(Minho Kim),최성만(Seongman Choi),서준호(Junho Seo),최채홍(Cheahong Choi),홍봉근(Bongguen Hong) 한국추진공학회 2010 한국추진공학회 학술대회논문집 Vol.2010 No.11
전북대학교 고온플라즈마 응용연구센터 구축사업단에서는 MW급 초음속 플라즈마 풍동을 구축하고 있다. 구축되는 장비는 0.4MW/2.4MW급 Huels형 DC 플라즈마 장치 및 60kW/200kW급 RF 플라즈마 장치 등으로 구성되며 이러한 장비를 지원하는 공통지원설비가 별도로 구축되게 된다. 공통지원설비는 플라즈마 풍동을 구동하기 위한 수변전설비 및 가스공급설비, 냉각수공급설비, NOx 제거용 후처리 설비, 예비전원설비 등으로 구성되어 있다. 4기의 플라즈마 장치와 공통지원설비를 위한 건축물은 시험동, 연구동, 수변전동, 기체저장동, 냉각탑 기초로 구성되어 있다. The high enthalpy plasma research center in Chonbuk national university is under construction for MW class plasma wind tunnel. Four types of plasma equipment will be installed in the research center. The equipments are 1set of 0.4 MW class enhanced Huels type plasma equipment, 1 set of 2.4 MW class enhanced Huels type plasma equipment, 1 set of 60 kW RF plasma equipment and 1 set of 200 kW RF plasma equipment. And electrical, water and gas utilities to assistant plasma equipments are under construction. The research center consists of experiment building, research building, power supply building, air supply building, cooling tower foundation.
최채홍(Cheahong Choi),김정수(Jeongsoo Kim),이미연(Miyeon Lee),김민호(Minho Kim),문세연(Seyeon Moon),서준호(Junho Seo),홍봉근(Bongguen Hong) 한국추진공학회 2013 한국추진공학회 학술대회논문집 Vol.2013 No.12
전북대학교 고온플라즈마응용연구소에 구축된 400kW급 고온플라즈마 발생장치의 성능시험을 수행하였다. 분절형 아크 히터에서 발생된 플라즈마는 초음속 노즐을 통과하며 가속되어 초고온 고속유동을 모사함을 통해 극한환경을 모사하게 된다. 이러한 고온플라즈마 발생장치의 운전가능 영역을 확인하기 위하여 공기 공급량과 분절형 아크히터의 양전극간 전류를 변화시켜 플라즈마가 유지되는 구간을 비교하였으며 토치의 효율 및 초음속 플라즈마 유동의 엔탈피 등을 측정하였다. 시험 결과 분절형 아크 히터는 123kW에서 420kW 까지의 출력 범위에서 작동할 수 있음을 확인하였고 이때 공기공급량은 10 g/s에서 16 g/s, 플라즈마 토치 양단간 전극에 인가된 전류는 140A에서 395A까지로 변경이 가능하였으며 본 시험을 통해 7~12 MJ/kg의 엔탈피를 갖는 초고온 유동을 발생하는 것을 확인하였다. This paper presents the operating characteristics of 400kW class high enthalpy supersonic plasma wind tunnel. The plasma wind tunnel employed segmented arc heater which is designed at total currents of 300A and the gas flow rates of 16 g/s. This facility can be applied to the ground test for material testing under reentry conditions for space vehicles. To evaluate operating region of the wind tunnel, total current and gas flow was changed as main operating variable. From the test results, the enthalpy is 12MJ/kg at 390A and 7MJ/kg at 140A.