http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Myristic acid를 사용한 축열장판의 열성능 연구
곽희열(H.Y.Kwak),강용혁(Y.H.Kang),전명석(M.S.Jeon),이태규(T.K.Lee),이동규(D.G.Lee),한귀영(G.Y.Han) 한국태양에너지학회 1998 한국태양에너지학회 논문집 Vol.18 No.3
본 논문은 미세캡슐을 함유한 축열장판의 열성능에 관해서 조사였고 기존 시판되고 있는 장판과 비교를 하였다. 상변화물질로는 myristic acid (CH₃(CH₂)_12COOH)를 사용했고 이물질을 PMMA와 왁스로 3중 코팅을 하였고 1~1.5mm인 캡슐로 제조를 하였다. ANSI/ASHRAE를 토대로 하여 열전달 매체로 공기를 사용한 밀폐형 실험장치를 구성하였으며, 공기유량은 오리피스를 통해서 측정된다. 실험에 사용된 두 개의 서로다른 장판(미세캡슐 함유율 중량비 10% 장판, 0% 장판)의 열성능을 평가하기 위해서 서로다른 공기유량에 대해서 방열시 열전달 특성에 관한 실험을 수행하였다.<br/> 실험결과를 보면 방열과정시 미세캡슐 함유율이 10%인 장판의 표면온도는 미세캡슐을 함유하지 않은 장판보다 더 높은 온도를 유지했다. 그리고 장판표면에서의 열전달계수는 미세캡슐을 함유하지 않은 장판과 비교해 볼 때 미세캡슐을 함유한 장판에서 더 높게 나타났다. The thermal performance of a heating board with microencapsualted PCM was investigated and compared to conventional heating board. The employed PCM was the myristic acid <CH₃(CH₂)_12COOH> and was encapsulated by the multiple layers of PMMA and paraffin wax. The size of encapsulated PCM was 1 ~ 1.5mm.<br/> Accoring to ANSI/ASHRAE test procedure, the close-loop test configuration was installed. Air was used as the heat transfer fluid and a calibrated orifice was employed for the measurement of air flow rates. The thermal performance test of two different heating boards (with 10 wt% PCM and without PCM) was conducted for different air flow rates and the heat transfer characteristics during cooling was compared.<br/> The test results showed that the surface temperature of heating board with 10 wt% PCM maintained higher during the cooling process than that of the heating board without PCM and experimentally determined heat transfer coefficient in heating board with PCM showed higher value compared to heating board without PCM.
화학축열을 통한 태양열 저장을 위한 메탄의 스팀개질 반응 특성
양동현(D.H.Yang),정찬화(C.H.Chung),한귀영(G.Y.Han),서태범(T.B.Seo),강용혁(Y.H.Kang) 한국태양에너지학회 2001 한국태양에너지학회 논문집 Vol.21 No.4
고온의 태양열을 저장하기 위한 한 방편으로 화학반응을 이용한 태양에너지의 화학에너지로의 변환공정을 고려하였다. 태양에너지의 저장은 메탄의 수증기 개질반응으로 선정하였으며, 이 흡열반응에서 메탄의 전화율에 영향을 미치는 조업변수의 영향을 살펴보았다. 반응기는 직격 0.635cm 그리고 길이 30cm인 스테인레스 관을 코일형태로 제작하였다. 메탄의 수증기 개질반응에서 반응물의 공간속도, 그리고 스팀/메탄 비율에 따라서 메탄의 전화울과 CO의 선택도가 영향을 받음을 알 수 있었다. 이 실험을 통하여 최적의 수증기/메탄 비율을 확인하였다. The chemical heat storage as the one way of utilization for high temperature solar energy was considered. The stram reforming reaction of methane was chosen for endothermic reaction. The reactor was made of stainless steel tube and it's dimension was 0.635 cm LD. and 30 cm long, coiled tube because of the geometry requirement of solar receiver. The effects of space velocity and reactants mole ratio on the methane conversion and CO selectivity were examined. From the experimental results, the optimum steam/methane mole ratio was determined.
화학축열을 통한 태양열 저장을 위한 메탄의 스팀개질 반응 특성
양동현(D.H.Yang),정찬화(C.H.Chung),한귀영(G.Y.Han),서태범(T.B.Seo),강용혁(Y.H.Kang) 한국태양에너지학회 2001 한국태양에너지학회 논문집 Vol.21 No.3
고온의 태양열을 저장학 위한 한 방편으로 화학반응을 이용한 태양에너지의 화학에너지로의 변환공정을 고려하였다. 태양에너지의 저장은 메탄의 수증기 개질반응으로 선정하였으며, 이 흡열반응에서 메탄의 전화율 특성을 살펴보았다. 반응기는 직경, 6.25mm, 그리고 길이 30cm인 stainless steel을 코일형태로 제작하였다. 반응온도 범위내에서 메탄의 전화율은 반응온도에 따라서 선형적으로 증가하였으며 반응온도 600℃ ~900℃ 범위에서 메탄의 전화율은 약 60% ~90% 로 측정되었다.이 실험을 통하여 태양열 저장을 위한 메탄의 수증기 개질반응의 타당성을 확인하였다. The chemical heat storage as the one way of utilization for high temperature solar energy was considered. The stram reforming reaction of methane was chosen for endothermic reaction. The reactor was made of stainless steel and the dimension was 6.25mm I.D. and 30cm long coiled tube because of the geometry requirement of solar receiver. The methane conversion was increased linearly with reaction temperature and nickel content of catalyst. The methane conversion was 60% at 6O0℃ and 90% at 9OO℃. The feasibility of steam reforming of methane as the conversion of solar energy to chemical heat storage was confirmed.