http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
鄭殷鎔 梨花女子大學校 韓國生活科學硏究院 1982 韓國生活科學硏究院 論叢 Vol.29 No.-
生活用水中의 重屬成分의 含量은 多樣하나 대개는 ppm單位以下의 微量成分으로 現在 그 成分의 除法方法은 用水의 使用目的에 따라 複雜하고 높은 費用의 處理方法들이 利用되고 있다. 本硏究는 用水中에서 重金屬의 不溶性인 黃化物을 만들어 모래나 活性炭의 層으로 여과분리할 때 가장 效率的인 條件을 檢討하였다. 그 結果 用水中에서 生成되는 安定한 重金屬의 黃化物 懸濁液에 小量의 黃酸알미늄을 添加하면 모래여과만으로도 97%以上의 重金屬成分을 分離除去할 수 있었다. The heavy metal contents is environmental water were found to be varied but usualy present in ppm concentrations. The current methods of removals of these metals were complex and expensive. In the present studies a removal of heavy metals was designed as insoluble sulfide followed by elution through sand column. The optimum condition for this procedure was investicated. More than 97% of removal was achieved by simple elution through sand column after formation of stable heavy metal sulfide suspension and addition of aluminum sulfate to the suspension.
鄭殷鎔 梨花女子大學校 韓國生活科學硏究院 1977 韓國生活科學硏究院 論叢 Vol.19 No.-
近來에 와서 食器의 材質變遷이 심하던 중 流行과 같이 stainless steel의 食器類는 短時日에 食器道具의 大宗을 이루게 되었다. 그 材質이 强靭하고 表面光澤이 良好하며 不銹性인 성질은 鍮器 그릇에 익숙한 우리들 生活에 便利한 利點을 돋보이게 한 것만은 事實이다. 本 硏究는 별로 檢討나 規制를 받지 않고 大量使用하는 데 따르는 問題點들을 使用者側에서 綿密히 試驗함으로써 衛生的인 使用法을 찾아보려는 데 그 目的이 있다. 實驗的 事實을 根據로 하여 stainless steel의 食器를 使用할 때는 다음 몇 가지 점에 留意하여야 된다. (1) 磁性이 없는 Sus 304(stainless steel의 材質番號)로 만든 食器를 選擇함이 좋다.( Sus 430의 stainless steel 는 磁性이 있어 磁石에 잘 붙으므로 區別이 容易하다.)Sus 430으로 만든 食器는 같은 溶液을 收容하여 같은 時間 經過할 때 金屬成分의 溶出狀況이 심하다. (2) 食鹽分이나 酸分이 있는 飮食物을 stainless steel의 食器에 貯藏할 때는 長時間 保管을 삼가는 것이 좋다. (3) stainless steel의 食器는 食事時 잠시 使用하고 잘 洗滌 保管한다. 될수록 乾燥하게 保管하고 表面에 鹽分이 남지 않도록 하여 金屬表面에 있는 不動態의 破壞가 없도록 하여야 된다. Many table wares available in the market are made of stainless steel, and we are concerned about the chemical contamination to the foods and drink while using these items. In this study the amuont of heavy metal component dissolved has been followed as a function of time under the ordinary condition in which the concentration of sodium chloride and acid were present at the level of our daily food. Accordig to the experimental results, for the mixture of sodium chloride and acetic acid as well as for sodium chloride solution, larger amounts of heavy metal components in the same period of time were detected from the table ware made of Sus 430 stainless steel as compared to that made of Sus 304. The above result suggests that stainless steel utensil is unsuitable for the food container although it may be used during the table time.
鄭殷鎔 梨花女子大學校 韓國生活科學硏究院 1973 韓國生活科學硏究院 論叢 Vol.11 No.-
Usually, the purification of cellulose nitrate depend upon prewashing process, cutting process and proching process for an industrial operation. This method has not only the long working period but also has the decreasing viscosity. Auther studied about the variation of stability, Viscosity and nitrogen content of cellulose nitrate that is purified from the method of precipitation by diluting with water or dilute alkali aqueous solution after dissolving by the effective solvents. In the results, the variations in viscosity and nitrogen content could not be fined comparative to those of original cellulose nitrate but the stability was good as might have been expected.
鄭殷鎔 梨花女子大學校 韓國生活科學硏究院 1974 韓國生活科學硏究院 論叢 Vol.12 No.-
A. Cavity effect로 이루어지는 Jet penetration power는 다와 式으로표시 할 수 있다. F=2πr^3kQ(sin^3θ/2-sin^5θ/3-sin^7θ/4+sin^9θ/5)+C 여기서 C는 Shaped charge에서 Cavity effect를 제외한 몇 條件에 따르는 常數이다. 이 常數를 支配하는 條件은 1. Cavity part를 제외한(fig. 1의 A點上部)爆樂의 影響 2. Liner의 材質과 두께 3. Shaped charge全體의 質量 4. Shaped charge을 被覆한 材料의 파괴응력 B. 일정한 條件에서 Jet-penetration의 Efficiency를 考慮하지 않으면 最大總集力 F를 나타내는 Liner의 底角은 61˚24' 이다. C. 원뿔형 Liner을 갖는 Shaped charge에서 가장 集中力을 크게 나타내는 部分은 Detonation ware front가 원뿔의 길이의 39%만큼 進行 해나온 部位에 있다고 일단 結論지울 수 있다. This invetigation applied the fundamental principle of detonation theory in interpreting the studies on the cavity effect. Formulating as a result, Jet penetrating power has accounted for the following formula, F=2πγ^3kQ(sin^3θ/2-sin^5θ/3-sin^7θ/4+sin^9θ/5)+C and when maximum penetrating power was obsenced, the angle of the cavity cone was calculated as 57˚12´. The derivable results from the theoretical formula can be illustrated on the experimental model of shaped charge.