http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
계면활성제 혼화제를 첨가한 시멘트 그라우트의 수중 불분리 특성 발현과 점도 증가 효과 연구
장인규 ( In Kyu Jang ),서승리 ( Seung Ree Seo ),박승규 ( Seung Kyu Park ) 한국공업화학회 2012 공업화학 Vol.23 No.5
구조재료로 사용되는 콘크리트란 시멘트, 모래, 자갈과 같은 고형분들이 물에 분산되어 있는 복합물질이다. 수중에 콘크리트 몰탈을 타설할때, 점탄성 특성이 우수하면 재료 분리가 적고, 물에 쓸려 내려가는 성질이 적고, 또 콘크리트가 잘충진되어 강도가 강화될 수 있다는 점에서 콘크리트의 레올로지 물성은 매우 중요하다. 본 연구에서는 음이온 계면 활성제, 양이온 계면활성제, 고분자계 증점제의 사용에 따른 콘크리트 첨가제의 최적 혼합 비율을 알아보았으며, 콘크 리트나 몰탈의 레올로지 물성의 변화와 수중불분리성에 대해 연구하였다. 음이온과 양이온 혼합계면활성제를 사용하는 pseudo-polymeric system을 적용한 콘크리트는 고점성이면서 수중불분리성은 우수하지만 펌핑성이 떨어지지만, 여기에 poly methyl vinyl ether (PMVE)를 소량 첨가하면 오히려 점도는 감소되면서 점탄성이 증가되고, 흐름성이 우수하며, 수중불분리성, 펌핑성 및 콘크리트 충진성이 향상되었다. Concrete, the mixture of cement, sand, gravel and water, is a suspension substance extensively used to construct building materials. When a concrete mortar is applied to the underwater construction, the rheology of concrete is of great importance to its flow performance, placement, anti-washout and consolidation. In this research, the anti-washout and rheological properties of concrete have been investigated with concrete admixtures prepared by adding anionic surfactants, cationic surfactants, and polymeric thickeners. The concrete mortar formulated by pseudo-polymeric systems with the electrostatic association of anionic and cationic surfactants, showed high viscosities and suitable anti-washout properties, but poor pumpabilities. The addition of poly methyl vinyl ether to the mixed surfactant system exhibits synergistic effects by improving the concrete mortar properties of the concrete mortar such as fluidity, visco-elastic property, self-leveling, and anti-washout.
이상재(Sang Jae Lee),이윤수(Yun Su Lee),권영철(Young Chel Kweon),박종운(Jong Un Park),장인규(In Kyu Jang) 대한기계학회 2001 대한기계학회 춘추학술대회 Vol.2001 No.9
The purpose of this study was to investigate the heat transfer characteristics of FCU(fan coil unit) heat exchanger, using Air-enthalpy Calorimeter. Experiments were carried out by changing air flow rate and water flow rate for φ 9.52㎜ heat exchanger with slit fin under cooling condition. The results show that the heat flux increases about 12% as changing circuit path(from 2 row series circuit to 1 row parallel circuit). The Capacity of sample 2 was about 28% as air flow rate and about 25% as water rate higher than that of sample 1. Also, j-factor of test condition A was better, compared with test condition B and f-factor of sample 2 was better since the pressure drop as changing circuit path.