http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
터널 심발부의 선균열을 이용한 발파공법의 현장시험에 관한 연구
황학,이태노,Hwang, Hak,Lee, Tai Ro 한국터널지하공간학회 2002 터널기술 Vol.4 No.4
터널굴착 발파기술로 새로 개발된 Composition Presplitting Angle Cut (COPA)은 기존 공법과는 달리 심발부에 먼저 인장파괴를 통하여 선균열 (사전절단)을 형성시킨다. 본 연구에서는 선균열 효과를 검증하기 위하여 굴진효율과 소음 진동의 발생크기를 측정하는 현장시험을 실시하였다. 그리고 이 공법의 경제성 및 작업성 (시공성)을 비교하기 위하여 동일한 조건에서 기존의 발파공법을 동시에 시험하여 그 결과를 비교하였다. 시험 결과 COPA - Cut 발파공법이 기존 발파공법보다 굴진효율이 증가하고 소음 진동이 감소되었다. 또한 경제성, 시공성 및 품질관리 측면에서 우수하다는 것을 확인 되었다. Composition Presplitting Angle Cut (COPA-Cut) is a newly developed blasting method for tunnel excavation. Contrary to existing methods, COPA-Cut first creates presplitting by tension crack in cut. In this study, field tests measuring the advance efficiency, noise and ground vibration were performed in order to verify the presplitting effect. To compare the economy and workability, tests were simultaneously performed by COPA-Cut and existing method on the same condition. Results show that COPA-Cut increased advance efficiency and decreased noise and ground vibration. Also, it was confirmed that COPA-Cut is superior to existing method in terms of economy, workability and quality control.
태양전지 전원 공급장치를 이용한 발파진동 자동화 계측시스템 운영 사례연구
유지완 ( Ji Wan Yoo ),이태노 ( Tai Ro Lee ),김정렬 ( Jung Ryul Kim ),김영석 ( Young Suck Kim ) 대한화약발파공학회 2008 화약발파 Vol.26 No.2
발파진동 계측방법은 일반적으로 수동식 방법과 자동화 방법으로 나눌 수 있다. 이중에서 자동화 계측방법은 계측원의 수동적 작동에 의한 방법에 의존하지 않고 별도의 공간(사무실 등)에서 원격장치를 이용하여 전통측정기를 작동시켜 데이터를 전송받게 된다. 본 연구에서는 태양전지를 이용한 발파진동 자동화 계측시스템 운영 연구사례를 소개하고자 한다. 향후, 계측원 접근이 어렵고 발파작업중에 진동값 변화추이를 수시로 관찰이 필요한 현장에서는 이와 같은 쏠라셀을 이용한 자동화 계측시스템이 매우 유용하게 활용될 수 있으며 발파진동 제어와 안전발파 관리가 효과적으로 이루어질 수 있을 것으로 사료된다. Measuring methods of the blasting vibration were generally divided the manual method and the automatical method. When using the automatical method, field data of the vibration meter can be transferred to a operation computer by using remote equipments. In this study new automatical system using solar power supply is to be introduced. New automatical system is well suited for the field which is difficult to access and is needed frequent measurements of the blasting vibration. And it can make easy to accumulate the data and control the blasting vibration for safe blasting.
NDC 및 Wide Space 혼합공법을 통한 발파효율 개선 사례연구
노상림(Sang-Lim No),노승환(Seung-Hwan Noh),이상필(Sang-Pil Lee),이훈연(Hoon-Yeon Lee),이태노(Tai-Ro Lee) 한국암반공학회 2006 터널과지하공간 Vol.16 No.5
본 연구는 발파 시 발생하는 진동을 저감시키고 발파효율을 증진시키기 위하여 NDC(New Deck Charge) 공법 및 Wide space 공법을 혼합하여 발파를 실시한 사례연구이다. NDC 공법은 종이분리봉을 이용하여 분산장약을 실시하는 공법으로 발파 시 진동은 저감시키나 공저부에서 발파효과가 저감되는 경향을 보인다. Wide Space 공법은 기존의 일반적인 발파공법에 비해 파쇄입도를 조절하고 발파효율을 높이는데 유리한 공법이다. 본 사례 연구에서는 두 가지 공법을 혼합하여 현장 적용성을 검토한 결과, 진동속도가 감소되고 발파효율이 증가하는 결과를 확인하였으며, 향후 다양한 조건에서 발파를 실시하여 자료를 축적한다면 민원저감 및 공기단축에 기여할 수 있는 유용한 발파패턴을 정립할 수 있을 것으로 사료된다. This paper introduces the combination of two blasting methods applied to reduce blast-vibration and increase blast efficiency. NDC (New Deck Charge) blasting method using air deck effect with separation tube made of paper was effective to reduce blast-vibration, while blast efficiency was decreased a little in the bottom of a blasthole. Wide Space blasting method has an advantage to control the fragmentation and to increase blast efficiency over conventional blasting methods. In this study new blasting method combining NDC blasting method and Wide Space blasting method was applied to the field, it was confirmed to reduce blast-vibration and increase blast efficiency. It is expected to make useful blasting method to cover the public complaints and to shorten construction time by accumulating blasting data using new method with various conditions.