http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
OFDM 시스템에서 PAPR 감소를 위한 피크 신호 관찰 기반의 적응적 SLM 기법
양석철(Suckchel Yang),신요안(Yoan Shin) 한국통신학회 2007 韓國通信學會論文誌 Vol.32 No.11C
본 논문에서는 OFDM (Orthogonal Frequency Division Multiplexing) 시스템에서 전송 신호의 PAPR (Peak-to-Average Power Ratio)을 효과적으로 감소시키기 위한 피크 신호 관찰 기반의 적응적 SLM (Adaptive SeLective Mapping; ASLM) 기법을 제안한다. 제안 기법은 기존 SLM 방법에서의 복잡도 문제를 개선하기 위해, 매 OFDM 심벌마다 IFFT (Inverse Fast Fourier Transform) 결과에 대한 피크 신호 조정, 피크 조정된 신호의 FFT 결과와 원래 OFDM 심벌간의 부반송파별 전력차 비교를 통한 직교 부호 선택, 선택된 직교 부호만을 이용한 전형적인 SLM 과정의 3단계로 구성된다. 모의실험 결과, 제안된 ASLM 기법은 우수한 PAPR 감소 성능을 유지하면서도 기존 SLM 방법에 비해 훨씬 적은 IFFT 연산 및 PAPR 계산 횟수를 요구함을 확인하였다. In this paper, we propose ASLM (Adaptive SeLective Mapping; ASLM) scheme based on peak observation for PAPR (Peak-to-Average Power Ratio) reduction of OFDM (Orthogonal Frequency Division Multiplexing) signals. The proposed scheme is composed of three steps: peak scaling, sequence selection, and SLM procedures. In the first step, the peak signal samples in the IFFT (Inverse Fast Fourier Transform) outputs of the original input sequence are scaled down. In the second step, the sub-carrier positions where the power difference between the original input sequence and the FFT output of the scaled signal is large, are identified. Then, the phase sequences having the maximum number of phase-reversed sequence words only for these positions are selected. Finally, the generic SLM procedure is performed by using only the selected phase sequences for the original input sequence. Simulation results show that the proposed scheme significantly reduces the complexity in terms of IFFT and PAPR calculation than the conventional SLM, while maintaining the PAPR reduction performance.
실내 무선 채널에서 전력검출 기반 Noncoherent OOK UWB 시스템의 성능 분석
오종옥,양석철,신요안,Oh Jongok,Yang Suckchel,Shin Yoan 한국통신학회 2004 韓國通信學會論文誌 Vol.29 No.11C
본 논문에서는 향후 유비쿼터스 센서 네트워크 응용 등에 적합하도록 간단한 송수신기 구조를 유지하면서, 실제 데이터를 전송하기 전에 Noise Power Calibration 및 Noise Power Windowing 방법을 통해 잡음의 영향을 고려하여 적응적인 임계값을 결정하고 이를 이용하여 전력검출 (Power Detection)을 수행하여 성능을 향상하는 임펄스 라디오 (Impulse Radio) 형태의 Noncoherent OOK (On-Off Keying) UWB (Ultra Wide Band) 시스템을 제시하고, 전형적인 UWB 실내 무선 채널 모델에서의 성능을 분석하였다. 모의실험 결과 AWGN (Additive White Gaussian Noise) 채널에서는 Noise Power Calibration 모드를 위한 슬롯수의 증가에 따라 이상적인 Ideal Adaptive Threshold를 사용하는 경우께 근접하는 우수한 성능을 보임을 확인할 수 있었고, 반면 데이터 전송률의 큰 감소를 감수해야 하는 Noise Power Windowing 방법에 의한 성능 개선은 두드러지게 나타나지 않음을 알 수 있었다. 더욱이 IEEE 802.15 Task Group 3a UWB 실내 채널 모델을 이용한 모의실험 결과, Noise Power Calibration 모드가 적용된 Noncoherent OOK UWB 시스템의 성능이 Ideal Adaptive Threshold의 경우와 비트오율 성능이 매우 근접하며, 펄스 반복 전송의 회수의 증가에 따라 비트오율 성능이 향상됨을 확인 할 수 있었다. In this paper, we evaluate the performance of a noncoherent OOK (On-Off Keying) UWB (Ultra Wide Band) system based on power detection with noise power calibration and noise power windowing for ubiquitous sensor network applications in typical indoor wireless channels. Utilizing noise power calibration and noise power windowing, the current noise information can be initially or adaptively provided to determine suitable detection threshold value for signal demodulation. Simulation results show that the noncoherent OOK UWB system using noise power calibration achieves good BER (Bit Error Rate) performance which is favorably comparable to that of the system using the ideal adaptive threshold, while maintaining simple receiver structure. However, despite the serious loss of the data transmission rate, the performance improvement by noise power windowing is not so remarkable. furthermore, these performance results are similarly maintained in BEE 802.15 Task Group 3a UWB indoor channel model, and it is also revealed that the BER performance can be significantly improved by increasing the pulse repetition rate.