http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
박윤범(Yun Bum Park),이재선(Jae Seon Lee),김종욱(Jong Wook Kim) 한국자기학회 2018 韓國磁氣學會誌 Vol.28 No.5
A CRDM (Control Rod Drive Mechanism) is an electromagnetic device which drives a control rod assembly linearly to regulate the reactivity of a nuclear core when electrical current is supplied to the lift and latch coils. Lifting force is decided according to magnetic substance properties, a gap between magnetic substances, and input electrical current in SMART CRDM design. In this paper, lifting force calculation according to gap and electrical input current variation of magnetic substance has been conducted by using finite element electromagnetic simulation. As a result, upper gap is large effect than bottom gap that the degree of contribution at the magnetic circuit. Also, it was confirmed that the larger the radial gap is the smaller the lifting force, and the larger input current is the larger lifting force. The results of this study are reflected in SMART CRDM design.
박윤범(Yun Bum Park),김종욱(Jong Wook Kim),이재선(Jae Seon Lee) 한국자기학회 2016 韓國磁氣學會誌 Vol.26 No.5
A CRDM (Control Rod Drive Mechanism) is an electromagnetic device which drives a control rod assembly linearly to regulate the reactivity of a nuclear core. An RPIS (Rod Position Indication System) is used as a position indicator for a control rod assembly of a CRDM of SMART, and an RPIS consists of permanent magnets and reed switches. SMART is designed for the maximum coolant temperature of 350 ℃, and the permanent magnets are installed inside of the reactor. The reed switches and electrical circuit are installed outside of the reactor on the other hand. Test coil for a reed switch is test equipment for quality verification of a reed switch, and a test coil consists of a coil and core. In this study, magnetic property of test coil and permanent magnet on a reed switch is compared by using finite element electromagnetic simulation.
인쇄기판형 증기발생기 유로 필릿 반경에 따른 응력 평가
박윤범(Yun Bum Park),김상지(Sang Ji Kim) 대한기계학회 2021 대한기계학회 춘추학술대회 Vol.2021 No.4
인쇄기판형 증기발생기는 일반적으로 에너지 플랜트에서 사용 중인 고급 열교환기 중에 한 종류이다. 현재 한국원자력연구원에서는 소형 원자로인 스마트 원자로에 인쇄기판형 증기발생기를 적용하기 위한 연구 개발이 진행되고 있다. 본 연구에서는 인쇄기판형 증기발생기의 유로 끝단의 필릿 반경에 따른 응력 평가를 위해 유한요소 프로그램인 ANSYS 와 ASME 코드가 활용 되였다. 연구의 목적은 유로 끝단의 필릿 반경과 요소 크기에 따른 응력 수렴 여부를 확인하고, 수렴된 응력을 평가하여 그 결과를 설계에 반영하기 위함이다. 응력 수렴 여부 확인을 위해 유로 끝단의 필릿 반경을 0mm, 0.01mm, 0.02mm 로 분류하였고, 요소 크기는 0.1mm, 0.01mm, 0.001mm, 0.0001mm 로 분류하였다. 분류된 값으로 해석을 수행한 결과, 필릿 반경이 0mm 인 경우 끝단이 응력 특이점으로 계산되어 응력이 무한대로 발산하였으며, 필릿 반경이 0.01mm 인 경우 요소 크기가 0.0001mm 일 때 응력이 수렴하였고, 필릿 반경이 0.02mm 인 경우 요소 크기가 0.001mm 일 때 응력이 수렴하는 것을 확인할 수 있었다. 즉 유로 끝단 필릿 반경이 작을수록 요소 크기도 작아야 해가 수렴하는 것을 알 수 있었고, 본 해석 모델에 대해서는 해가 수렴하기 위한 조건이 필릿 반경 대비 요소 크기가 1/100 정도임을 확인하였다. 유로 끝단의 필릿 반경 및 요소 크기에 따라 수렴된 응력은 ASME 코드에 명시된 응력분류선 및 허용응력을 기준으로 구조건전성이 평가되었으며, 평가 결과는 인쇄기판형 증기발생기 유로의 설계에 활용될 예정이다. A printed-circuit steam generator is one of advanced heat exchangers generally available on the energy plant. A printed-circuit steam generator for the SMART is developed by KAERI. In this study, the stress evaluation for channel fillet radius of printed-circuit steam generator have been conducted by using finite element analysis simulation. Consequently, this analysis results will be used appropriated printed-circuit steam generator design.
박윤범(Yun Bum Park),김상지(Sang Ji Kim) 대한기계학회 2021 대한기계학회 춘추학술대회 Vol.2021 No.11
In this study, the application standard for the thermal shock test of a printed circuit steam generator is analyzed and a study on the applicable method, process, and evaluation is conducted. The analyzed thermal shock test standards are MIL-STD-810G, IEC 60068-2-14, and JEDEC 22-A101. The analysis results will be applied to the thermal shock test of printed circuit steam generator.