http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이음면 이격이 확장형 단부판 이음부 성능에 미치는 영향에 대한 실험적 연구
김철환,이명재,김희동,김사빈,Kim, Cheol Hwan,Lee, Myung Jae,Kim, Hee Dong,Kim, Sa Bin 한국강구조학회 2016 韓國鋼構造學會 論文集 Vol.28 No.6
This study is experimental research for the effect of gap at the end plate on the performance of extended end-plate type splice. For this research, simple beam type specimens by using extended end-plate type splice are planned. Main variables are the initial gap between end-plates, the installation of finger shim plate before the installation of high tension bolts, the final gap between end-plates, and the installation of finger shim plate after the installation of high tension bolts. The static loading tests results show that the maximum bending strength of splice is not dependent on the gap, but the vertical displacement, initial stiffness and elastic stiffness are affected by the gap. In addition to that, the possibility of brittle fracture is increased when the torque of high tension bolt is used to control the gap. Thus, careful consideration is needed in this case. 두본 연구는 실험적인 방법을 통하여 단부판 이음부의 이음면에서 초기 오차로 발생하는 이격이 이음부의 내력 및 거동에 미치는 영향을 평가한 연구이다. 이를 위하여 총 5가지의 단순보형 실험체를 확장형 단부판 이음부를 이용 계획하였고 주요 변수로는 이음면 초기 이격(gap) 여부, 고력볼트 채결 전 끼움판(finger shim plate) 설치 유무, 고력볼트 체결 후 이음면 이격, 고력볼트 채결 후 끼움판 삽입 여부를 적용하였다. 정적가력실험 결과 이음판의 이격은 이음부의 최대휨강도에 미치는 영향은 제한적이나 수직변형과 초기 및 탄성강성에는 영향을 미치는 것으로 나타났으며, 이격을 제어하기 위해 고력볼트 장력을 이용할 경우 고력볼트의 취성파괴 우려도 있는 것으로 나타나서 이들에 대한 충분한 고려가 필요할 것으로 판단된다.
콘크리트충전 각형강관기둥-보 접합부의 거동에 관한 연구
김철환,이은택,Kim, Cheol Hwan,Lee, Eun Taik 한국강구조학회 1998 韓國鋼構造學會 論文集 Vol.10 No.4
콘크리트충전 강관기둥-보 강접합부의 역학적 특성을 규명하기 위하여 모델 시험체에 대한 반복가력 실험을 행하였다. 실험변수로는 항복부위, 내부다이어프램의 유공의 크기 및 슬래브 설치 유무이다. 보 항복형 시험체인 경우에는 다이어프램 항복형 시험체에 비하여 충강성이 높고 내력의 저하없이 높은 층간변형을 가지고 있다. Experimental studies were carried out with test parameters: diaphragm yield type and beam yield type, the opening hole size of inner steel diaphragm, and the existence of slab in order to understand the behavior of beam-to-concrete filled steel tube column rigid connections under cyclic loading condition. Test results show that the connections have good rotational capacity when the beam yields first and the joints should be designed such that the beam yields prior to the inner diaphragms.
김철환,Kim, Cheol-Hwan 한국방위산업진흥회 1993 國防과 技術 Vol.- No.175
요즈음 논란이 일고있는 율곡사업등으로 해서 국방부나 각 군에서 혼란을 겪고 있는 "무기체계 획득과정 쇄신"에 도움이 되었으면 해서 미국의 무기체계 획득과정과 정책을 소개합니다 이번 호에 게재된 내용과, 93/10월호에는 –의사결정 지원체계 및 검토과정 –회기득사업요약서/사업계획서 –획득 전문화 제도(DAWIA) –무기체계 획득 및 군수지원 전산화(CALS) –획득정책 발전방향 순으로 계속해서 연재됩니다
Rotation-Up 공법에 의한 킬 트러스 대공간 구조물의 Erection 실험에 관한 연구
김철환,채원탁,백기열,정환목,Kim, Cheol-Hwan,Chae, Won-Tak,Baek, Ki-Youl,Jung, Hwan-Mok 한국공간구조학회 2013 한국공간구조학회지 Vol.13 No.2
There are a number of construction methods to build spatial structures such as erection method, Element method, Block method, Sliding method, Lift-up method and Push-up method. These methods are uneconomical and low accuracy, and require long construction duration because of a need of a scaffold or a tower crane to build spatial roof frame. In this study, the construction method to erect a truss structure was proposed as an economical and easy installation method. The proposed method has end hinges of keel truss and winches with horizontal cable. This method makes safe and accurate production and reduces construction duration because trusses are built on the floor or supporter. The goal of this study is to verify the validity of construction method by building scale model using the proposed method.