http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
선형유도전동기를 이용한 전자기 펌프의 특성해석 및 실험
김창업,전문호,권정태,임효재,Kim, Chang-Eob,Jeon, Mun-Ho,Kwon, Jeong-Tae,Lim, Hyo-Jae 한국조명전기설비학회 2007 조명·전기설비학회논문지 Vol.21 No.6
본 논문에서는 선형유도전동기의 전자기력에 의해 용융 금속을 이송할 수 있는 전자기 펌프에 대하여 특성 해석 및 실험 결과에 대하여 제시하였다. 선형유도전동기에서 발생하는 전자기력과 전자수력학(MHD) 현상을 결합하여 용융 금속의 이송 특성을 해석하였다. 실험은 용융 아연을 대상으로 하였으며, 해석 결과와 비교 검토하였다. This paper presents the characteristics analysis and experiment of the electromagnetic pump using linear induction motor(LIM Pump) which can transfer the molten metals by the electromagnetic force. The characteristics of LIM Pump are analysed solving the magneto-hydro-dynamic(MHD) equation at various magnetic flux. The molten zinc is used in the experiment and the results we compared with the analysis.
유전알고리즘과 반응표면법을 이용한 BLDC 전동기용 영구자석 최적설계
김창업,전문호,Kim, Chang-Eob,Jeon, Mun-Ho 한국조명전기설비학회 2004 조명·전기설비학회논문지 Vol.18 No.6
본 논문에서는 유전알고리즘, 반응표면법을 이용하여 BLDC 전동기의 코깅 토크를 최소화 하기 위한 최적화 설계 방법을 제안하였다. 유전알고리즘, 반응표면법을 이용하여 BLDC 전동기의 설계변수를 추론하고 유한요소법으로 코깅 토크를 구하였다. 유전알고리즘, 반응표면법을 유한요소법과 결합하여 사용함으로써 BLDC 전동기의 코깅 토크를 최소로 하는 영구자석의 형상을 보다 빠르고 정확하게 구할 수 있었다. In this paper, an optimum design method is presented for BLDC moor magnet using genetic algorithm(GA) and response surface method(RSM). The cogging torque is calculated by finite element method for the designs obtained by GA and RSM. The results are compared and discussed for the simulation time and the cogging torque.
김창업,전문호,Kim, Chang-Eob,Jeon, Mun-Ho 한국조명전기설비학회 2005 조명·전기설비학회논문지 Vol.19 No.5
본 논문은 선형유도전동기를 이용한 전자기펌프의 특성해석에 대하여 연구한 것이다. 전자기 펌프는 선형유도전 동기의 추진력에 의하여 용융 금속을 이송할 수 있다. 추진력을 높이기 위해 유전 알고리즘을 사용하여 최대 추력을 가지는 선형유도전동기를 설계 하고, 선형유도전동기를 이용한 전자기 펌프의 특성해석을 유동해석에 의하여 분석하였다. This paper presents the characteristics analysis of an electromagnetic pump using the linear induction motor(LIM). The electromagnetic pump can be used to transfer the molten metals by the electromagnetic force of LIM. The characteristics of the pump are analyzed solving a hydrodynamic equation with an electromagnetic one.
김창업(Chang-Eob Kim):전문호(Mun-Ho Jeon) 호서대학교 공업기술연구소 2006 공업기술연구 논문집 Vol.25 No.1
The electromagnetic pump can transfer molten metals by the electromagnetic force of LIM. This paper presents the characteristics analysis and experiment of the electromagnetic pump using linear induction motor(LIM). The characteristics of LIM pump are analysed solving the Magneto-Hydr으 Dynamics at constant magnetic flux. The molten zinc is used in the experiment and the experimental results are compared with the analysis.
전자력과 유동방정식을 결합한 전도성 용융금속의 유동특성 해석 및 실험
전문호(Mun-Ho Jeon),이석원(Suk-Won Lee),김창업(Chang-Eob Kim) 대한전기학회 2009 전기학회논문지 Vol.58 No.7
This paper presents the flow characteristics in the fluid circulation loop using the tubular type linear induction motor(TLIM) electromagnetic pump. A TLIM pump was designed using the equivalent and genetic algorithm for the flow system of 40[l/min]. The flow characteristics are analyzed by coupling the Maxwell equations with the Navier-Stokes equation. The analysis algorithm also takes account of the effects of the thrust. The flow characteristics are analysed with the proposed method and compared with the commercial program and experiment and discussed.
전문호(Mun-Ho Jeon),김창업(Chang-Eob Kim) 한국조명·전기설비학회 2011 조명·전기설비학회논문지 Vol.25 No.4
This paper deals with the electromagnetic clutch which stop the generator at emergency by using the engine power of generator. The electromagnetic field was analyzed using Flux-2d program with different conditions : voltage, air gap, coil locations. As a result, the maximum magnetic flux density of electromagnetic clutch occurred between the coil and wheel : 0.27[T], 0.41[T] at 12[V], 24[V]. The maximum flux density was at the center location of the coil.
2[MVA] 배전용 몰드변압기의 글라스넷 형상 최적설계
전문호(Mun-Ho Jeon),김창업(Chang-Eob Kim) 한국조명·전기설비학회 2011 조명·전기설비학회논문지 Vol.25 No.1
In this paper, the optimum design of the glass net shape was studied to minimize the electric field of mold transformer. The glass net is used for reinforcement in structure between coils and epoxy, but it can cause to increase the electric field and the partial discharge. Therefore, the optimum design of glass net is required to minimize the electric field. In this paper, the objective function was approximated by using response surface method and then Zoom-in method was used for optimal design to minimize the electric field. The electric field was analysed using finite element method for each shape of glass nets.
2[MVA] 몰드변압기 절연물내 기포 영향을 고려한 전계해석
김창업(Chang-Eob Kim),전문호(Mun-Ho Jeon),이석원(Suk-Won Lee) 한국조명·전기설비학회 2010 조명·전기설비학회논문지 Vol.24 No.4
본 논문에서는 유한요소법을 이용하여 2[MVA] 몰드변압기의 전계분포에 대한 기포의 영향을 분석하였다. 1차로 기포가 없을 때 전계해석을 하고, 다음으로 전계의 세기가 가장 큰 부분에 에폭시 절연물 내부에 기포가 발생한 경우 전계의 영향을 분석하고 전계분포를 해석하였다. 또한 기포에 의해 생기는 부분방전 개시전압에 대해서도 예측하였다. 해석 조건으로서 기포의 크기, 위치, 개수 및 형상에 대하여 해석하고, 해석 조건에 따른 전계의 영향에 대해 비교 검토하였다. This paper presents the electric field analysis for 2[MVA] mold transformer using finite element method. The electric field was calculated for the voltage applied to the mold transformer without voids in the insulating material. Then, it was analysed the maximum electric field when the voids was in the insulating materials. And the starting voltage of partial discharge was predicted due to the voids. The effects of voids in epoxy resin on the electric field were investigated for different sizes, shapes, positions and arrangements of voids.