http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
치주수술 후 상아질 지각과민증에 대한 저수준 레이저 처치의 임상적 효과
김남윤,임성빈,정진형,Kim, Nam-Yun,Lim, Sung-Bin,Chung, Chin-Hyung 대한치주과학회 1996 Journal of Periodontal & Implant Science Vol.26 No.1
Root surface exposure due to gingival recession after periodontal surgery, dentin exposure after root planing elicit pain response when exposed to mechanical, heat, chemical or osmotic stimulation. Especially, patients treated with periodontal surgery, show high frequency and there have been reports showing the 1 out of 7 patients have dentin hypersensitivity. There have been many studies on the clinical effects of various materials on the treatment of dentin hypersensitivity. but, none could provide absolute clinical efficacy. In this study, 45 teeth from 30 patients, who had had periodontal surgery and showed dentin hypersensitivity after surgery were chosen for the experimental group and they were illuminated with laser, 15teeth were chosen for the control group and they were not exposed to laser. After this dentin hypersensitivity was elicited by tactile, compressed air, cold water and then, the degree was evaluated using NRS(Numerical Rating Scale). And during LLLT(Low Level Laser Therapy) semiconductor laser using Gallium - Arsenide as a diode was illuminated for 180 seconds at a frequency of 7(500Hz). This therapy was done 10 times, and each time the changes in dentin hypersensitivity was evaluated using NRS. The results were as follows : 1. After treat with LLLT on dentin hypersensitivity due to periodontal surgery, 22.2% showed total loss of dentin hypersensitivity, 60.0% showed loss of tactile dentin hypersensitivity, 48.8% showed loss of compressed air dentin hypersensitivity, 22.2% showed loss of cold water dentin hypersensitivity. 2. As a result of clinical evaluation of dentin hypersensitivity using NRS, there was significant increase in improvement of dentin hypersensitivity in the experimental group compare to the control group(P<0.05). And there was almost no natural loss of dentin hypersensitivity in the control group. 3. In comparison of the stages of evaluation, there was significant difference in between experimental and control group. after the second visit(P<0.05), and the difference increased with each visit.
김남윤(Namyun Kim),신현식(Heonshik Shin),김일석(Ilsuk Kim),김연철(Yeonchul Kim) 한국정보과학회 1993 한국정보과학회 학술발표논문집 Vol.20 No.2
실시간 시스템의 태스크는 외부 입력에 대한 응답시 시간 제약 조건을 가진다. 즉, 외부 입력을 받아들여 제한된 시간내에 출력 장치에 응답을 해야 한다. 따라서 인터럽트 지연 시간을 최소화하고 태스크의 수행 시간을 예측할 수 있는 기법이 실시간 커널에 요구된다. 본 논문에서는 임계영역을 최소화하여 인터럽트 지연 시간을 줄이는 스케줄링 기법과 태스크의 블러킹 시간을 제한할 수 있는 동기화 기법을 이용하여 실시간 커널을 구현하였다.
CNC 제어기 사례 연구를 통한 실시간 시스템 설계 기법의 평가
김남윤(Namyun Kim),유민수(Minsoo Ryu),홍성수(Seongsoo Hong),신현식(Heonshik Shin) 한국정보과학회 1998 정보과학회 컴퓨팅의 실제 논문지 Vol.4 No.1
디지털 제어기의 응용 분야가 다양해지고 복잡해짐에 따라 정확하고 자동화된 실시간 시스템 설계 기법이 요구되고 있다. 본 논문에서는 스케쥴링 지터, 센서에서 출력까지의 지연 시간, 태스크간 통신 기법, 시스템 이용률과 같은 설계 선택 사항을 바탕으로 실시간 제어 시스템에 관한 실험 결과를 제시한다. 실험의 주요 목적은 Gerber 등이 제시한 주기 할당 기법을 이용하여 생성된 실시간 시스템을 평가하고 이 방법의 문제점을 적시하는 것이다. 대상 실시간 시스템으로서 CNC(Computerized Numerical Control) 기계를 선택하였으며 제어기와 플랜트 시뮬레이터를 사실적으로 구현하였다. 본 연구는 많은 흥미로운 사실을 보여주고 있는데 실험 결과를 요약하면 다음과 같다. 첫째, 센서에서 출력까지의 평균 지연 시간은 제어 시스템의 성능을 결정하는데 가장 중요한 요소중 하나이다. 둘째, 스케쥴링 지터에 의한 영향은 평균 지연시간이 작을 때만 나타난다. 셋째, 태스크의 주기는 성능을 결정하는 중요한 요소이며 초기의 예상과는 달리, 시스템의 이용률은 성능과 직접적인 관련이 없다. 실험 결과에 대한 분석을 토대로 본 논문에서는 새로운 통신 기법과 주기 할당 기법을 제안한다. As the application areas of digital controller diversify and controlled systems become more complex, correct and automatic methodology on real-time system design is required. In this paper we describe our experiments on a real-time control system, focusing on design alternatives such as scheduling jitters, sensor-to-output latency, intertask communication schemes and the system utilization. The primary objectives of these experiments are to evaluate a real-time system design produced using the period calibration method proposed by R. Gerber and his colleagues and thus identify the limitations of the method. We choose a computerized numerical control(CNC) machine as our target real-time system and build a realistic controller and a plant simulator. This study unveils many interesting facts: (1) Average sensor-to-output latency is one of the most dominating factors in determining control quality, (2) the effect of scheduling jitter appears only when the average sensor-to-output latency is sufficiently small, and (3) loop processing periods are another dominating factor of performance. Contrary to our original expectation, the system utilization is not directly related to the performance. Based on our analysis, we propose a new communication scheme and a new obiective function for the period calibration method.
인식 품질 향상을 위한 H.264 SVC 스트림 계층 선택 알고리즘
김남윤(Namyun Kim) 한국멀티미디어학회 2009 한국멀티미디어학회 학술발표논문집 Vol.2009 No.1
H.264 SVC(Scalable Video Coding)는 스트림을 계층적으로 구성하여 다양한 단말기와 네트워크에 적응적으로 대처할 수 있도록 설계되었다. 따라서 인터넷상의 서버나 프록시는 동적인 네트워크 환경에서 사용자의 인식 품질을 향상할 수 있도록 SVC의 계층을 선택하여야 한다. 본 논문에서는 H.264 SVC 스트림의 특성을 분석한 후, 부드러운 재생이 되면서 높은 PSNR을 유지할 수 있는 계층 선택 알고리즘을 제안한다.