http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
마병철 ( Byung Chol Ma ),권혁면 ( Hyuck Myun Kwon ),김영철 ( Young Chul Kim ) 한국안전학회(구 한국산업안전학회) 2012 한국안전학회지 Vol.27 No.6
The purpose of this study is to suggest new safety technical standards to improve the safety in the incine-ration process. Firstly, we analyzed the major accidents occurred in the incineration process since 1996 and proposed 4 articles which is required to be added newly to the existing KOSHA GUIDE. Secondly, we also performed the HAZOP study for each study node and also suggested 3 articles. Finally, we analyzed recommendations commented for PSM reports which have been submitted from the enterprise located in Honam province since 2005 and proposed 2articles as well. We understand that all 9 articles proposed above, should be added to the KOSHA GUIDE in order to improve the safety in the incineration process and to prevent the major fire and explosion accidents in the design stage.
가연성 금속분진 폭발시 저장 및 포집용 구조물에 대한 3차원 유한요소 해석
장창봉(Chang Bong Jang),용종원(Yong Jong Won),백종배(Jong Bae Baek),권혁면(Hyuck Myun Kwon),고재욱(Jae Wook Ko) 한국가스학회 2011 한국가스학회지 Vol.15 No.5
최근 산업구조가 미래 첨단산업 위주로 전환되면서 자동차를 비롯한 항공기, 휴대폰, 전자기기 등 다양한 산업분야의 제품에 Al, Mg, Li, Zn과 같은 가연성 금속의 사용량이 크게 증가하고 있으며 이러한 가연성 금속의 가공과정에서 발생하는 금속분진에 의한 폭발 사고 또한 증가하고 있다. 금속분진에 의한 폭발사고는 가연성 금속분진을 포집 및 저장하는 국소배기설비의 공기정화장치에서 대부분 발생함에 따라 공기정화장치내 폭발 발생시 폭발압력에 의한 공기정화장치 구조물의 변형과 파열형태를 단순 예측이 아닌 유한요소해석(FEA)법에 의해 기술적으로 분석 및 제시하고자 본 연구를 수행하였다. Due to the latest industrial flow comes mainly switch to high-tech industries, combustible metals as Al, Mg, Li, Zn more require to use for the aircraft, car, cell phones, electronics and others. As a result, Increasing the processing of combustible metals due to increase in amount of combustible metals giving rise dust explosions also. Most Explosions caused by combustible metal dust, occurred in air cleaning device of local exhaust ventilation to capture and store the combustible dust. Therefore, this study was conducted to present and analyze technically that deformation and rupture shape of air cleaning device structure by Finite Element Analysis(FEA) rather than a simple prediction, in case of explosion occurs in an air cleaning device.
정량적 원인분석이 가능한 위험기반검사(KS-RBI)에 의한 화학설비의 위험도 경감방안
이헌창(Hern-Chang Lee),조지훈(Ji-Hoon Jo),김규정(Kyu-Jung Kim),권혁면(Hyuck-Myun Kwon),김태옥(Tae-Ok Kim) 한국가스학회 2008 한국가스학회지 Vol.12 No.2
정량적 원인분석이 가능한 위험기반검사 프로그램(KS-RBI Ver. 3.0)을 사용하여 화학설비의 위험도를 산출하고, 설비의 위험도를 경감할 수 있는 방안을 모색하였다. 그 결과, 손상메커니즘, 검사횟수 및 검사 유효성을 고려하여 사고발생 가능성(LOF)을 줄이고, 검출, 차단 및 완화 시스템의 수준을 변경하여 사고 피해 크기(COF)를 감소시킴으로써 설비의 위험도를 낮출 수 있었다. 특히, 고 위험도를 낮추기 위해서는 LOF와 COF를 동시에 낮출 수 있는 방안을 모색할 필요가 있으며, 설비의 위험도를 경감함으로써 설비의 안전성 향상으로 사고피해 감소는 물론 검사주기 연장으로 검사비용 및 인건비 절감 등을 기대할 수 있다. The risks of the chemical facilities were estimated by the KS-RBI(Ver. 3.0) program supporting the quantitative cause analysis, and reduction method for the risks of the facilities was investigated. As a result, we could find that the risks of the facilities decrease with reducing the likelihood of failure (LOF) affected by demage mechanism, inspection number and effectiveness of inspection, and with reducing the consequence of failure (COF) affected by the ratings of the detection, isolation, and mitigation systems. Furthermore, high risks of the facilities would be decreased by reduction of the LOF and the COF simultaneously. Accordingly, the applied plant would be able to achieve the decrease of inspection and labor costs because of the decrease of consequences and inspection intervals through the reduction of risks.
CFD를 이용한 가연성 가스의 확산 및 폭발 Simulation
장창봉(Chang-Bong Jang),이향직(Hyang-Jik Lee),이민호(Min-Ho Lee),민동철(Dong-Chul Min),백종배(Jong-Bae Back),고재욱(Jae Wook Ko),권혁면(Hyuck-Myun Kwon) 한국가스학회 2012 한국가스학회지 Vol.16 No.5
현재 가연성 가스의 누출시 누출된 가스의 확산과 VCE에 의한 과압을 예측하기 위해 여러 모델들이 이용되고 있다. 그러나 이 모델들은 누출설비의 지형과 장애물 그리고 건물들의 영향에 대해서는 충분히 고려하지 않은 단순한 접근방법을 이용하고 있다. 이에 본 연구는 누출된 물질의 연소형태, 설비의 Geometry, 난류, 장애물, 바람의 영향등 여러 변수를 고려하여 보다 정확하게 분석할 수 있는 CFD(Computational Fluid Dynamics) Model을 검토함으로서 누출된 가스의 확산과정과 분포형태 그리고 폭발시 화염과 과압의 결과를 2D와 3D의 가상공간에서 제시하였다. 이러한 CFD분석결과는 폭발에 대한 리스크 분석과 리스크 기반의 설계에 있어 유용하게 활용될 것으로 판단된다. Various models are currently applied to predict the dispersion of leaked combustible gas and overpressure from a vapor cloud explosion(VCE). However, those models use simple approaches where topography and barriers of anti-leakage facilities and the effects of buildings were not sufficiently taken into considerations. For this reason, this study has proposed the dispersion process of leaked gas, distribution patterns, and flames and overpressure generated from gas explosions in 2D and 3D virtual spaces by reviewing more accurately analyzable computational fluid dynamics(CFD) model by considering various variables including combustion types of leaked substances, geometry of facility, warm currents, barriers, the influence of wind, and others. The CFD analysis results are anticipated to be usefully applied for the risk analysis of explosion and for the risk-based design.