http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
트러서메쉬 보강 하프 슬래브의 구조적 거동에 관한 실험적 연구
고만영,김용부,박현수,정란,Ko, Man-Young,Kim, Yong-Boo,Park, Hyun-Soo,Chung, Lan 한국콘크리트학회 1995 콘크리트학회지 Vol.7 No.4
이 연구는 최근 건설공사에서의 인력 및 원가의 절감, 공기의 단축 등을 도모하기 위하여 도입되고 있는 하프슬래브의 실용화를 위한 구조거동을 알아보기 위한 실험적 연구이다. PC 패널의 두께, 트러스메쉬의 형사, 가력하중의 형태를 변수로 총 17개의 시험체를제작하여 PC 패널, 하프슬래브, 하프슬래브-벽체 접합부의 휨성능 실험을 하였다. 실험결과, 부방향 하중을 받는 PC 패널의 휨강도가 설계강도보다 작게 나타났으나 정방향 하중을 받는 PC판넬과 덧침콘크리트의 분리현상이 발견되지 않았으며 휨강도 또한 일체로 타설한 부재와 같은 휨내력을 발현하였다. 따라서, 본 연구에서는동바리를 2.0-2.5m간격으로 설치하고, PC판넬과 덧침콘크리트와의 접합면을 조면처리하고 청결을 유지하면 사용상 문제가 없는 것으로 판단되었다. This paper summarizes experimental results for studying feasibility and structural behavior of' a half slab which is getting popularity in recent building construction in favour of the savings in manpower, coats, and construction period. 17 specimens were tested to investigate and analyze the flexural strength of precast concrete slab, half slab, and half slab-wall joint. The primary variables of the testing program were: thickness of precast concrete slab, truss mesh shape, and type of loadings. Test results show that the flexural strength of precast concrete slab in reverse loading is lower than the design strength, but the flexural strength of precast concrete slab, half slab and half slab-wall joint in direct loading is higher than the design srength. No horizontal cracks were found in the connection between insitu concrete and precast concrete slab. The flexural strength of half slab and half slab-wall joint was the same as that of reinforced concrete members. This study concludes that there will not be any structural problem in using a half slab reinforced by truss mesh if props spacing of 2.0m-2.5m, cleanness, and rough finishing between precast concrete and insitu concrete slab are kept.
고훈범(Ko, Hune-Bum),고만영(Ko, Man-Young) 한국산학기술학회 2015 한국산학기술학회논문지 Vol.16 No.7
탄성포장재에 대한 기존의 연구는 포장재의 투수성, 공법적용에 관한 접근이 많아 탄성포장재의 기초적인 성능연구 보다 실용화에 초점을 맞춘 연구가 많았다. 본 연구에서는 경제적인 차원에서 필요한 탄성조건과 투수성 등을 만족하면서 콘크리트나 아스팔트로 포장된 장소에서 기존 하층 노면에 대한 재시공 없이 자원낭비나 환경오염이 발생하지 않도록 두께 가 얇은 탄성포장재의 시공 가능성에 대하여 두께가 다른 5종류(10, 13, 15, 20, 25mm)의 시험편과 고무 칩과 바인더의 혼합 비가 다른 3개(20, 22.5, 25%)의 시험편을 가지고 다양한 시험을 실시하고 기본적인 물성을 파악하였다. 결과적으로 정성적인 관점에서 탄성바닥재의 두께를 품질조건에 따라 최소한(10∼25mm)으로 할 수 있는 여지가 있으며, 바닥재가 온도에 민감하 여 내구성증진에 대한 대안도 필요하다고 판단된다. Previous studies have considered the permeability and construction method of paving materials, thus focusing on more practical issues rather than basic research of their properties. The present study investigated the possibility of using an elastic paving material having lesser thickness in the resurfacing of existing concrete or asphalt paved areas while satisfying the necessary conditions of resilience and water permeability. An alternative to complete reconstruction would reduce the amount of resource wastage and environmental pollution, as well as the cost of projects. This study investigated five variants of thickness (10, 13, 15, 20, 25mm) and three mixing ratios of binder to rubber chips (20, 22.5, 25%) to ascertain the ideal basic properties of each. The obtained test data revealed that a minimum thickness(10∼25mm) of the elastic paving materials can be determined from a qualitative point of view, and alternatives should be provided to improve the durability of the paving material on account of the temperature sensitivity.