RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • KCI등재

        고분자전해질연료전지의 냉각수 누설에 대한 연구

        송현도,강정탁,김준범,Song, Hyun-Do,Kang, Jung-Tak,Kim, Jun-Bom 한국전기화학회 2007 한국전기화학회지 Vol.10 No.4

        연료전지 운전 중에 스택(stack) 분리판 접착부위나 다른 경로로 부동액이 누설될 경우에는 화학적 반응에 영향을 주어 성능의 저하가 발생할 수 있다. 본 연구에서는 부동액이 누설되었을 경우의 성능 거동을 관찰하는 실험을 수행하였다. $400mA/cm^2$ 전류밀도 조건에서 마이크로 펌프를 이용하여 부동액을 주입하였으며 상대습도 100%/100%와 수소와 공기의 양론비는 1.5/2.0으로 고정하여 실험을 수행하였다. 3 cell stack을 이용하여 부동액을 주입한 후 정전류 회복 실험을 수행한 결과 cathode측에 부동액을 주입하였을 경우에는 성능이 회복되었고 anode측에 부동액을 주입하였을 경우에는 성능이 회복되기 어려운 것으로 나타났다. Anode측이 회복되지 못하는 이유로는 ethylene glycol의 산화반응에서 발생하는 불순물에 의한 피독 현상과 GDL과 3상 계면에 ethylene glycol이 물리적으로 흡착하였을 경우 반응에 필요한 연료 공급의 방해로 인한 성능 저하를 예상할 수 있다. 성능 저하에 영향을 주는 두 가지 변수를 확인하는 실험을 수행하였다. 회복 실험은 anode측에 water pump를 이용하여 질소 기체와 물을 동시에 공급하는 방법으로 실험을 수행하였고, 1시간 간격으로 성능 회복 유무를 확인하였다. 성능 평가는 polarization curve, cyclic voltammetry(CV), electrochemical impedance spectroscopy(EIS)를 사용하였으며, 정량분석은 gas chromatography를 이용하여 분석하였다. 부동액 주입 후 성능은 크게 저하되었고 정전류 회복 실험에서도 성능 회복은 미미하게 나타났다. 이 후 물 주입회복 실험을 수행하였고 회복 실험을 수행한 2시간 이후에는 93% 이상의 회복을 관찰할 수 있었다. The performance of polymer electrolyte membrane fuel cell could be decreased due to coolant leaked from connection part. Micro pump was used to put small amount of coolant and investigate the effect on fuel cell. The stoichiometric ratio of hydrogen/air was 1.5/2.0, both side of gas was fully humidified, and current density of $400mA/cm^2$ was used as standard condition in this experiment. Constant current method was used to check performance recovery from coolant effect in 3 cell stack. The performance was recovered when coolant was injected in cathode side. On the other hand, the performance was not recovered when coolant was injected in anode side. Ethylene glycol could be converted to CO in oxidation process and cause poisoning effect on platinum catalyst or be adhered on GDL and cause gas diffusion block effect resulting performance decrease. Water with nitrogen gas was supplied in anode side to check performance recovery. Polarization curve, cyclic voltammetry, electrochemical impedance spectroscopy was used to check performance, and gas chromatography was used to check coolant concentration. Constant current method was not enough in full recovery of performance. However, water injection method was proved good method in full recovery of performance.

      • KCI등재

        탄소나노튜브에 담지된 PtCo 촉매 제조 및 PEMFC Cathode 전극 특성

        정동원,박순,강정탁,김준범,Jung, Dong-Won,Park, Soon,Kang, Jung-Tak,Kim, Jun-Bom 한국재료학회 2009 한국재료학회지 Vol.19 No.5

        The electrocatalytic behavior of the PtCo catalyst supported on the multi-walled carbon nanotubes (MWNTs) has been evaluated and compared with commercial Pt/C catalyst in a polymer electrolyte membrane fuel cell(PEMFC). A PtCo/MWNTs electrocatalyst with a Pt:Co atomic ratio of 79:21 was synthesized and applied to a cathode of PEMFC. The structure and morphology of the synthesized PtCo/MWNTs electrocatalysts were characterized by X-ray diffraction and transmission electron microscopy. As a result of the X-ray studies, the crystal structure of a PtCo particle was determined to be a face-centered cubic(FCC) that was the same as the platinum structure. The particle size of PtCo in PtCo/MWNTs and Pt in Pt/C were 2.0 nm and 2.7 nm, respectively, which were calculated by Scherrer's formula from X-ray diffraction data. As a result we concluded that the specific surface activity of PtCo/MWNTs is superior to Pt/C's activity because of its smaller particle size. From the electrochemical impedance measurement, the membrane electrode assembly(MEA) fabricated with PtCo/MWNTs showed smaller anodic and cathodic activation losses than the MEA with Pt/C, although ohmic loss was the same as Pt/C. Finally, from the evaluation of cyclic voltammetry(CV), the unit cell using PtCo/MWNTs as the cathode electrocatalyst showed slightly higher fuel cell performance than the cell with a commercial Pt/C electrocatalyst.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼