http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
정찬혁(Chan-Hyeok Jeong),이재석(Jae-Seok Lee) 대한기계학회 2015 대한기계학회 춘추학술대회 Vol.2015 No.11
In this study, we verify the accurate numerical analysis and simplify the perforated plate of inlet and exhaust duct using porous media for the cost reduction and the efficiency improvement of thermal-fluid analysis to evaluate cooling performance of wheel-loader. The flow loss coefficient of the perforated plate is defined by the experiment result. To define analytically the flow loss coefficient of the perforated plate, we calculate the pressure drop of unit-cell and compare to experiment result. Finally, we compare the heat balance test and the simplified simulation result on the inlet and exhaust duct of wheel-loader. After this study, we verify the applicability of the simplified analysis method on the inlet and exhaust duct of wheel-loader. And, foundation which can carry out effectively the evaluation and improvement for cooling performance of wheel-loader is prepared.
정찬혁 ( Chan-hyeok Jeong ),이상철 ( Sang-cheol Lee ),서현근 ( Hyeon-keun Seo ),박동호 ( Dong-ho Park ),신창선 ( Changsun Shin ) 한국정보처리학회 2020 한국정보처리학회 학술대회논문집 Vol.27 No.2
매실의 병충해 이미지를 Tensorflow hub에서 제공하는 Resnet50모델에 Transfer Learning기법을 이용하여 학습시키고, 학습된 모델을 Flask를 이용하여 연동시킨다. 이렇게 완성된 웹앱은 사용자가 매실의 이미지를 업로드 하면, 어떤 병충해를 가지고 있는 지 알려주며, 사용자는 얻은 결과를 통해 육안으로 구분하기 어려운 병충해의 정보를 얻어 매실이 손상이 가는 것을 예방할 수 있다.
건설장비용 열교환기 성능 추정 및 최적화 설계에 대한 수치해석 연구
정찬혁(Jeong Chan Hyeok),김형락(Kim Hyung Rak),하만영(Ha Man Yeong),이재석(Lee Jae Seok),김판영(Kim Pan Yeong) 대한기계학회 2013 대한기계학회 춘추학술대회 Vol.2013 No.5
핀-판형 열교환기의 형식에 속하는 루버핀 열교환기는 다른 핀-판형 열교환기와 비교하여 열전달 성능향상과 중량을 감소 시킬 수 있어 건설장비용 열교환기에 사용되고 있다. 하지만 건설장비 분야에 사용하는 루버형 열교환기는 먼지 농도가 높고, 이물이 많이 발생하는 작업환경에 사용하므로 성능이 저하되는 단점이 있으며 유지 및 보수에 많은 시간적, 물질적 비용이 요구된다. 본 연구에서는 기존 건설장비용 열교환기에 사용되고 있는 루버핀 열교환기의 핀 형상과 유량변화에 따른 압력강하량과 열전달량을 측정하여, 이를 대체 할 수 있는 다른 형상의 열교환기를 선정하고자 한다. 핀의 구멍 수, 핀 곡선의 주기 수 그리고 핀 곡선의 접촉각과 같은 변수들에 대해 최적화 테스트를 수행하였다. 변수들을 조합하여 압력강하 및 열전달 특성인 f-factor와 j-factor를 구하고, 루버핀 열교환기의 값들과 비교 분석하여 최적의 형태를 제시하였다. Louvered fin heat exchanger included in the plate-fin type has been used as the construction machinery, because it can enhance the heat transfer performance compared to the other. But, louver type which is used at the working environment, foreign bodies are generated, is required to expense for maintenance. The purpose of this study is to measure heat exchanger that it can be substituted for louver type. The optimization test on minimum control volume was performed with the diverse variables such as, the number of hole, cycle and contact angle of fin curve. It is found that heat transfer and pressure drop are obtained by the combination of parameters. As a result, the optimum type is suggested through the comparison analysis of f-factor and j-factor