통합 전력품질 제어기의 과전류 보호방법에 관한 연구

이우철,김한정 한국조명전기설비학회 2002 조명·전기설비학회논문지 Vol.16 No.5

본 논문에서는 직렬형, 병렬형 능동전력필터로 구성되어 있는 통합전력품질 제어기(UPQC)의 과전류에 대한 보호기법이 제시되며, 해석된다. 제안된 과전류 보호기법은 직렬형 능동전력필터에 과전류의 기본파 성분에 대해서고 임피던스를 갖는 기능을 부여함으로써 구현하였으며, 세 가지 방법을 제시하였다. 첫 번째 방법은 p-q이론을 이용하여 기본파 전원전류를 검출하여 보호하는 방법, 두 번째 방법은 동기 좌표계에서 부하전류의 기본파 성분을 검출하여 보호하는 방법, 세 번째 방법은 입력전압을 검출하여 보호하는 방법이다. 전원계통에서 과전류가 흘렀을 경우 제안된 방법들은 UPQC에 부가적인 회로 없이 보호해 줄 수 있다. 제안된 방법의 타당성은 시뮬레이션 결과를 통하여 입증된다. A protection scheme for Unified Power Quality Conditioner (UPQC) is presented and analyzed in this paper. The proposed UPQC has the series active power filter operated as a high impedance k($\Omega$) to the fundamentals when the over current occurs in the power distribution system, and three control strategies are proposed in this paper. The first is the method by detecting the fundamental source current through the p-q theory,[1] the second is the method by detecting the fundamental component of load current in Synchronous Reference Frame(SRF) and the third is the method by detecting the input voltage. When the over current occurs in the power distribution system, the proposed scheme protects the UPQC without additional protection circuits. The validity of proposed protection scheme is investigated through simulation results.

Control Strategy for Selective Compensation of Power Quality Problems through Three Phase Four-Wire UPQC

Yash Pal,A. Swarup,Bhim Singh 전력전자학회 2011 JOURNAL OF POWER ELECTRONICS Vol.11 No.4

This paper presents a novel control strategy for selective compensation of power quality (PQ) problems, depending upon the limited rating of voltage source inverters (VSIs), through a unified power quality conditioner (UPQC) in a three-phase four-wire distribution system. The UPQC is realized by the integration of series and shunt active power filters (APFs) sharing a common dc bus capacitor. The shunt APF is realized using a three-phase, four-leg voltage source inverter (VSI), while a three-leg VSI is employed for the series APF of the three-phase four-wire UPQC. The proposed control scheme for the shunt APF, decomposes the load current into harmonic components generated by consumer and distorted utility. In addition to this, the positive and negative sequence fundamental frequency active components, the reactive components and harmonic components of load currents are decomposed in synchronous reference frame (SRF). The control scheme of the shunt APF performs with priority based schemes, which respects the limited rating of the VSI. For voltage harmonic mitigation, a control scheme based on SRF theory is employed for the series APF of the UPQC. The performance of the proposed control scheme of the UPQC is validated through simulations using MATLAB software with its Simulink and Power System Block set toolboxes.

Control Strategy for Selective Compensation of Power Quality Problems through Three-Phase Four-Wire UPQC

Pal, Yash,Swarup, A.,Singh, Bhim The Korean Institute of Power Electronics 2011 JOURNAL OF POWER ELECTRONICS Vol.11 No.4

This paper presents a novel control strategy for selective compensation of power quality (PQ) problems, depending upon the limited rating of voltage source inverters (VSIs), through a unified power quality conditioner (UPQC) in a three-phase four-wire distribution system. The UPQC is realized by the integration of series and shunt active power filters (APFs) sharing a common dc bus capacitor. The shunt APF is realized using a three-phase, four-leg voltage source inverter (VSI), while a three-leg VSI is employed for the series APF of the three-phase four-wire UPQC. The proposed control scheme for the shunt APF, decomposes the load current into harmonic components generated by consumer and distorted utility. In addition to this, the positive and negative sequence fundamental frequency active components, the reactive components and harmonic components of load currents are decomposed in synchronous reference frame (SRF). The control scheme of the shunt APF performs with priority based schemes, which respects the limited rating of the VSI. For voltage harmonic mitigation, a control scheme based on SRF theory is employed for the series APF of the UPQC. The performance of the proposed control scheme of the UPQC is validated through simulations using MATLAB software with its Simulink and Power System Block set toolboxes.

A Single-Phase Unified Power Quality Conditioner with a Frequency-Adaptive Repetitive Controller

Dang-Minh Phan,Hong-Hee Lee 대한전기학회 2018 Journal of Electrical Engineering & Technology Vol.13 No.2

This paper proposes a single-phase unified power quality conditioner (S-UPQC) for maintaining power quality issues in a microgrid. The S-UPQC can compensate the voltage and current harmonics, voltage sag, and swell as a dynamic voltage restorer (DVR), regardless of variations in the grid frequency. Odd harmonics are treated as even-order harmonics in a rotating frame to implement the harmonic compensators with only one repetitive controller (RC) without any harmonic extractor. The dynamic performance is improved and the delay time is reduced in the RC. The S-UPQC control scheme is designed to maintain accurate and stable operation under deviations of the grid frequency by using the Lagrange interpolation-based finite-impulse-response (LIFIR) filter approximation method. The proposed control schemes were validated through a simulation and experiment.

Unified Power Quality Conditioner for Compensating Voltage Interruption

Byung-Moon Han,Bo-Hyung Cho,Seung-Ki Sul,Jae-Eon Kim 대한전기학회 2006 Journal of Electrical Engineering & Technology Vol.1 No.4

This paper proposes a new configuration for the Unified Power Quality Conditioner, which has a DC/DC converter with super-capacitors for energy storage. The proposed UPQC can compensate the reactive power, harmonic current, voltage sag and swell, voltage imbalance, and voltage interruption. The performance of the proposed system was analyzed through simulations with PSCAD/EMTDC software. The feasibility of system implementation is confirmed through experimental works with a prototype. The proposed UPQC has ultimate capability to improve the power quality at the point of installation on power distribution systems and industrial power systems.

A Single-Phase Unified Power Quality Conditioner with a Frequency-Adaptive Repetitive Controller

Phan, Dang-Minh,Lee, Hong-Hee The Korean Institute of Electrical Engineers 2018 Journal of Electrical Engineering & Technology Vol.13 No.2

This paper proposes a single-phase unified power quality conditioner (S-UPQC) for maintaining power quality issues in a microgrid. The S-UPQC can compensate the voltage and current harmonics, voltage sag, and swell as a dynamic voltage restorer (DVR), regardless of variations in the grid frequency. Odd harmonics are treated as even-order harmonics in a rotating frame to implement the harmonic compensators with only one repetitive controller (RC) without any harmonic extractor. The dynamic performance is improved and the delay time is reduced in the RC. The S-UPQC control scheme is designed to maintain accurate and stable operation under deviations of the grid frequency by using the Lagrange interpolation-based finite-impulse-response (LIFIR) filter approximation method. The proposed control schemes were validated through a simulation and experiment.

Unified Power Quality Conditioner for Compensating Voltage Interruption

Han, Byung-Moon,Cho, Bo-Hyung,Sul, Seung-Ki,Kim, Jae-Eon The Korean Institute of Electrical Engineers 2006 Journal of Electrical Engineering & Technology Vol.1 No.4

This paper proposes a new configuration for the Unified Power Quality Conditioner, which has a DC/DC converter with super-capacitors for energy storage. The proposed UPQC can compensate the reactive power, harmonic current, voltage sag and swell, voltage imbalance, and voltage interruption. The performance of the proposed system was analyzed through simulations with PSCAD/EMTDC software. The feasibility of system implementation is confirmed through experimental works with a prototype. The proposed UPQC has ultimate capability to improve the power quality at the point of installation on power distribution systems and industrial power systems.

Asymmetrical SPWM‑based control scheme for BESS‑integrated UPQC with hybrid connected configuration

Zhenqiang Zhang,Jianjun Zhao,Shen Liu,Hongbo Wang,Nan Wang,Peng Zhang,Yue Yu,Peng Xu 전력전자학회 2022 JOURNAL OF POWER ELECTRONICS Vol.22 No.10

The unified power quality conditioner (UPQC) integrated with the battery energy storage system not only mitigates the power quality problems on the grid side and load side but also supplies active power to the load or the grid. The wide voltage variation of the battery and the high efficiency of the whole system can be achieved with the hybrid connected configuration, i.e., the battery is connected simultaneously to the series and shunt converters of the UPQC directly and indirectly through the dc–dc converter. However, the control and modulation strategies are the major challenges for this configuration. This study proposes a control scheme based on asymmetrical sinusoidal pulse width modulation (SPWM) to realize high-efficiency active power delivery, thereby addressing the issue above. The mechanism of the modulation scheme to regulate active power is revealed, and the voltage variation of the battery is considered. The modified SPWM strategy features easy implementation and a low computation burden. The effectiveness of the system with the proposed control and modulation schemes is verified by both simulation and experimental results.

Modelling and Performance Analysis of UPQC with Digital Kalman Control Algorithm under Unbalanced Distorted Source Voltage conditions

Venkatesh Kumar,Rajeswari Ramachandran 전력전자학회 2018 JOURNAL OF POWER ELECTRONICS Vol.18 No.6

In this paper, the generation of a reference current and voltage signal based on a Kalman filter is offered for a 3-phase 4wire UPQC (Unified Power Quality Conditioner). The performance of the UPQC is improved with source voltages that are distorted due to harmonic components. Despite harmonic and frequency variations, the Kalman filter is capable enough to determine the amplitude and the phase angle of load currents and source voltages. The calculation of the first state is sufficient to identify the fundamental components of the current, voltage and angle. Therefore, the Kalman state estimator is fast and simple. A Kalman based control strategy is proposed and implemented for a UPQC in a distribution system. The performance of the proposed control strategy is assessed for all possible source conditions with varying nonlinear and linear loads. The functioning of the proposed control algorithm with a UPQC is scrutinized and validated through simulations employing MATLAB/Simulink software. Using a FPGA SPATRAN 3A DSP board, the proposed algorithm is developed and implemented. A small-scale laboratory prototype is built to verify the simulation results. The stated control scheme for the UPQC reduces the following issues, voltage sags, voltage swells, harmonic distortions (voltage and current), unbalanced supply voltage and unbalanced power factor under dynamic and steady-state operating conditions.

교류철도급전계통에 전력품질보상장치 적용에 관한 연구

최준호,Choi, Joon-Ho 한국조명전기설비학회 2004 조명·전기설비학회논문지 Vol.18 No.6

전기 철도계통은 기존 전력계통과 달리 단상, 대용량 부하로 필연적으로 전압강하, 전압불평형 및 고조파 왜곡 등의 전력품질의 문제가 발생한다. 최근 철도계통의 전력품질문제는 철도차량 및 시스템의 제어 및 안전 때문에 중요한 화두가 되고 있다. 이는 또한 기존 전력계통의 전력품질에도 영향을 미친다 본 논문에서는 전기철도 급전시스템에 발생하는 전력품질문제의 보상에 관한 연구를 수행하고자 한다. 이를 위해 국내 교류전기철도 표준 급전방식인 AT(Auto Transformer)급전시스템, 철도급전변압기인 스콧트 변압기(Scott Transformer), AT변압기, 철도선로 및 철도 차량부하를 모델링 하였다. 과도응답은 전자기과도해석 프로그램인 PSCAD/EMTDC를 사용하여 해석 하였다. 또한 전력품질을 보상하기위한 방안으로 급전선-전차선에 설치되는 전력품질보상기(Unified Power Quality Conditioner : UPQC)를 제안하였고 이의 성능 및 유효성을 시뮬레이션을 통하여 확인하였다. The AC railway system is quite differing from the general electric power system because it is single- phase and intermittently heavy loads. Thus, inevitably power quality problems are occurred in the AC railway system, i.e. voltage regulation voltage sags, voltage imbalance, and harmonic distortion. Recently, the power quality of the AC railway system becoming a hot issue because it is affect the control and safety of high-speed traction. In addition it is also affect the power quality of the electric power system. In this paper, single-phase Unified Power Quality Conditioner(UPQS) for the AC railway system is proposed to compensate the voltage sags and harmonic distortion. The configurations and control schemes of the proposed single-phase UPQC are presented. The effectiveness of the proposed single-phase UPQC application is verified by the PSCAD/EMTDC simulation works. It can be shown that the application of UPQC in the AC railway system is very useful to compensate the voltage sags and harmonic distortion from the results of related simulation works.