http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
- 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
- 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
RISS 인기검색어
- 검색키워드
- 저자 : Seyed M. Zahrai (검색결과 5 건)
- 무료
- 기관 내 무료
- 유료
-
Seyed M. Zahrai,Seyed R. Mirghaderi,Aboozar Saleh 국제구조공학회 2017 Steel and Composite Structures, An International J Vol.23 No.5
A kind of accordion-web RBS connection, "Tubular Web RBS (TW-RBS)" connection is proposed in this research. TW-RBS is made by replacing a part of web with a tube at the desirable location of the beam plastic hinge. This paper presents first a numerical study under cyclic load using ABAQUS finite element software. A test specimen is used for calibration and comparison of numerical results. Obtained results indicated that TW-RBS would reduce contribution of the beam web to the whole moment strength and creates a ductile fuse far from components of the beam-to-column connection. Besides, TW-RBS connection can increase story drift capacity up to 9% in the case of shallow beams which is much more than those stipulated by the current seismic codes. Furthermore, the tubular web like corrugated sheet can improve both the out-of-plane stiffness of the beam longitudinal axis and the flange stability condition due to the smaller width to thickness ratio of the beam flange in the plastic hinge region. Thus, the tubular web in the plastic hinge region improves lateral-torsional buckling stability of the beam as just local buckling of the beam flange at the center of the reduced section was observed during the tests. Also change of direction of strain in arc shape of the tubular web section is smaller than the accordion webs with sharp corners therefore the tubular web provides a better condition in terms of low-cycle fatigue than other accordion web with sharp corners.
-
Improving Seismic Behavior of MRFs by U-shaped Hysteretic Damper Along Diagonal Brace
Seyed M. Zahrai,Mohammad Froozanfar 한국강구조학회 2019 International Journal of Steel Structures Vol.19 No.2
This paper presents seismic assessment of a U-shaped hysteretic damper as an enhancement system, in moment resisting frames. The proposed system is consisted of a damping box at the middle of a diagonal brace. The box includes U-shaped steel plates welded to the side plates. When a transverse load, like earthquake, is exerted to the building, relative displacement between the stories forms and will be transmitted to the braces where energy dissipation will be achieved by adding a displacement-dependent U-shaped damper. For this purpose, the system is applied to a 2D 2-span 3-story frame to which by applying eight diff erent earthquake records, far-fi eld, near-fi eld and mid-fi eld, seismic response are evaluated. The responses are the roof displacement, inter-story drifts, root mean squared of roof displacement and base shear. Result verifi cation is carried out via calibrating characteristics of this damper with an experimental work on a somewhat similar device conducted at the University of Toronto. The results showed that by using this system, the roof maximum displacement decreased 38.9, 40.0 and 37.1% and the maximum base shear decreased 36.5, 28.5 and 39.5% respectively under near-fi eld, mid-fi eld and far-fi eld records, averagely. Similar results were observed in inter-story drifts and roof displacement RMS.
-
Seyed M. Zahrai,Seyed R. Mirghaderi,Aboozar Saleh 국제구조공학회 2017 Steel and Composite Structures, An International J Vol.23 No.4
Experimental and numerical studies of a newly developed Reduced Beam Section (RBS) connection, called Tubular Web RBS connection (TW-RBS) have been recently conducted. This paper presents experimental and numerical results of extending the plastic hinge length on the beam flange to increase energy dissipation of a proposed version of the TW-RBS connection with two pipes, (TW-RBS(II)), made by replacing a part of flat web with two steel tubular web at the desirable location of the beam plastic hinge. Two deep-beam specimens with two pipes are prepared and tested under cyclic loads. Obtained results reveal that the TW-RBS(II) like its type I, increases story drift capacity up to 6% in deep beam much more than that stipulated by the current seismic codes. Based on test results, the proposed TW-RBS(II) helps to dissipate imposed energy up to 30% more than that of the TW-RBS(I) specimens at the same story drift and also reduces demands at the beam-to-column connection up to 30% by increasing plastic hinge length on the beam flange. The TW-RBS(II) specimens are finally simulated using finite element method showing good agreement with experimental results.
-
Proposing optimum parameters of TMDs using GSA and PSO algorithms for drift reduction and uniformity
Nadia M. Mirzai,Seyed Mehdi Zahrai,Fatemeh Bozorgi 국제구조공학회 2017 Structural Engineering and Mechanics, An Int'l Jou Vol.63 No.2
In this study, the optimum parameters of Tuned Mass Dampers (TMDs) are proposed using Gravity Search Algorithm (GSA) and Particle Swarm Optimization (PSO) to reduce the responses of the structures. A MATLAB program is developed to apply the new approach to the benchmark 10 and 40-story structures. The obtained results are compared to those of other optimization methods used in the literature to verify the developed code. To show the efficiency and accuracy of the proposed methods, nine far-field and near-field worldwide earthquakes are applied to the structures. The results reveal that in the 40-story structure, GSA algorithm can reduce the Relative Displacement (RD) and Absolute Acceleration (AA) up to 43% and 21%, respectively while the PSO decreases them by 50% and 25%, respectively. In contrast, both GSA and PSO algorithms reduce the RD and AA about 29% and 21% for the 10-story structure. Furthermore, using the proposed approach the required TMD parameters reduce by 47% and 63% in the 40 and 10-story buildings in comparison with the referenced ones. Result evaluation and related comparison indicate that these methods are more effective even by using smaller TMD parameters resulting in the reduction of acting force from TMD, having smaller stiffness and damping factors while being more cost effective due to its decreased parameters. In other words, the TMD with optimum parameters can play a positive role in both tall and typical structures.
-
Aboozar Saleh,Seyed M. Zahrai,Seyed R. Mirghaderi 국제구조공학회 2016 Structural Engineering and Mechanics, An Int'l Jou Vol.57 No.5
An innovative Reduced Beam Section (RBS) connection, called Tubular Web RBS connection (TW-RBS), has been recently introduced and its performance has been numerically investigated in some earlier studies. The TW-RBS connection is a kind of accordion-web RBS connection in which part of the flat web of the beam is replaced by a steel tube at the expected region of the plastic hinge. This paper presents experimental results of three TW-RBS connections under cyclic loading. Obtained results indicated that TW-RBS reduces contribution of the beam web to the whole moment strength and creates a ductile fuse far from components of the beam-to-column connection. Besides, TW-RBS connection can increase story drift capacity up to 9% in the case of shallow beams which is much more than those stipulated by the current seismic codes. Based on the experimental results, the tubular web in the plastic hinge region improves lateral-torsional buckling stability of the beam such that only local buckling of the beam flange at the center of the reduced section was observed during the tests. In order to achieve a better understanding, behavior of all TW-RBS specimens are also numerically investigated and compared with those of experimental results.
연관 검색어 추천
이 검색어로 많이 본 자료
활용도 높은 자료
