http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
전진 비행하는 쿼드 틸트 로터의 공력성능 및 특징에 대한 수치적 연구
이성기(Seonggi Lee),오세종(Sejong Oh),최성욱(Seongwook Choi),이융교(Yunggyo Lee),박동훈(Donghun Park) 한국항공우주학회 2018 韓國航空宇宙學會誌 Vol.46 No.3
본 연구에서는 전진 비행하는 쿼드 틸트 로터(Quad Tilt Rotor, QTR)에 대한 수치적 연구를 수행하여, 각 구성 요소에 의한 간섭효과와 위상차 및 로터 회전 방향 등 로터 운용조건에 의한 영향을 분석하였다. 효율적인 로터 유동장 계산을 위해 오픈소스 CFD 코드인 OpenFOAM에 Actuator Surface Method(ASM) 기법을 결합한 해석자를 사용하였다. 전 · 후방 날개의 양력은 날개 끝단에 부착된 로터의 회전 방향에 따라 증감하며 특히 후방 날개에서는 전 · 후방 로터에 의한 간섭효과가 복합적으로 나타난다. 전 · 후방 로터의 위상차에 의한 날개의 공력 성능 변화는 상대적으로 미미함을 확인하였다. 로터에서는 날개로 인한 폐쇄효과 발생에 따라 국소적으로 높은 추력이 발생한다. 특히, 후방 로터에서는 전방 나셀에서 발생한 후류의 간섭효과로 인해 전방 로터 대비 높은 국소적 추력이 발생한다. 또한 로터 간의 위상차에 따라 추력 요동의 진폭이 감소할 수 있음을 확인하였으며 운용 조건에 따른 전 · 후방 로터의 성능과 전체 비행체의 공력 성능을 비교, 분석하였다. In this study, numerical analyses on Quad Tilt Rotor(QTR) are carried out to investigate the interference effect of components and effect of operating condition during forward flight. Actuator Surface Method(ASM) which is implemented in an open source CFD code, OpenFOAM, is used to calculate the flow field around QTR with high computational efficiency. The lift of the front and rear wing is found to increase or decrease depending on the rotation direction of the rotor. At the rear wing, the interference effects of the front and rear rotor appear as a combined manner. Performance change due to the phase difference is found to be insignificant. For both rotors, the locally higher thrust is generated by the blockage effect of the wing. The interference effect of wake from the front nacelle contributes to higher local thrust for the rear rotor compared to the front rotor. And it is observed that the amplitude of thrust oscillation can decrease depending on the phase difference between the rotors. Aerodynamic performances of both rotors and the entire aircraft were compared and analyzed for various operating conditions.
Lee, DongChan,Kim, Dongwoo,Park, Seonggi,Lim, Junyub,Kim, Yongchan Elsevier 2018 Applied thermal engineering Vol.130 No.-
<P><B>Abstract</B></P> <P>Although R-1233zd(E) has been considered as an alternative to R-245fa used in the organic Rankine cycle (ORC), experimental studies on the heat transfer characteristics of R-1233zd(E) in plate heat exchangers are limited. In this study, the evaporation heat transfer coefficient and pressure drop of R-1233zd(E) in a brazed plate heat exchanger are measured with respect to the mass flux, heat flux, saturation temperature, and vapor quality. As a result of the experiment in this study, the heat transfer coefficient of R-1233zd(E) is strongly dependent on the mass flux and vapor quality, and not on the heat flux and saturation temperature because the flow is in the convective boiling regime. The frictional pressure drop of R-1233zd(E) shows a strong dependence on the mass flux, vapor quality, and saturation temperature. Moreover, the heat transfer coefficient and pressure drop of R-1233zd(E) are compared with those of R-245fa. Finally, empirical correlations for the heat transfer coefficient and friction factor of R-1233zd(E) are developed based on the measured data.</P> <P><B>Highlights</B></P> <P> <UL> <LI> The heat transfer coefficient and pressure drop of R-1233zd(E) are measured. </LI> <LI> Evaporation features of R-1233zd(E) are analyzed in terms of operating parameters. </LI> <LI> The heat transfer characteristics of R-1233zd(E) are compared with those of R-245fa. </LI> <LI> Correlations of Nusselt number and friction factor of R-1233zd(E) are developed. </LI> </UL> </P>
시뮬레이션 모델을 이용한 직팽식 열교환기의 냉각 성능 예측
박성기(Seonggi Park),장동수(Dong Soo Jang),이동찬(DongChan Lee),김용찬(Yongchan Kim) 대한설비공학회 2016 대한설비공학회 학술발표대회논문집 Vol.2016 No.6
With the rise of electric vehicles, the thermal management of the batteries becomes important issue. The technical requirements for high capacity and compactness of the batteries make the thermal management critical. As the overheat of the batteries degrades the performance and durability of the vehicles, an effective cooling device to lower the temperature is needed. In this study, a simplified model of a direct expansion heat exchanger was developed. The direct expansion heat exchanger consists of the large number of lithium-ion battery cells as a heat source, and 4 cooling channels attached to the cells. The cooling fluid was R-134a flowing horizontally through rectangular channels. Using the simulation model, the influence of vapor quality of refrigerant on the cooling performance was examined. In addition, the temperature distribution of the cells was observed and the heat transfer characteristics of the direct expansion heat exchanger were analyzed.
김성기(Seonggi Kim),이석호(Sukho Lee) 한국정보과학회 1990 한국정보과학회 학술발표논문집 Vol.17 No.2
복합 객체는 상호 연관된 객체들의 집합으로 투플이나 투플의 집합도 복합 객체의 구성 요소가 될 수 있으며, CAD/CAM, 사무 정보 시스템 등의 새로운 데이타베이스 응용에서 복합 객체를 표현하고 처리하는 것은 매우 중요하다. 본 논문에서는 복합 객체를 다루기 위하여 복합 객체의 그래프 구조와 복잡한 관계성을 잘 활용할 수 있는 경로 수식에 기반한 질의어를 제시한다. 제시된 질의어는 여러 단계로 내포된 집합 객체에 대하여 쉽게 질의를 할 수 있게 하며, 복합 객체에 대한 여러 유용한 연산을 제공한다.
구조화 값과 식별성을 갖는 복합 객체의 질의어 및 질의어 처리
김성기(Seonggi Kim),이석호(Sukho Lee) 한국정보과학회 1993 정보과학회논문지 Vol.20 No.4
본 논문에서는 객체와 구조화 값을 지원하는 모델에서의 고수준의 질의 기능을 갖는 SQL 유형의 질의어를 제시한다. 질의어는 값과 객체에 대해 통일된 연산을 지원하고, 다단계 집합에 대한 질의를 용이하게 하며 경로 수식을 통하여 그래프 구조의 복합 객체를 쉽게 탐색 항해하게 한다. 질의어는 대수 연산으로 번역되어 처리되므로 질의에 대한 정형적 분석이 가능하며, 질의 변형에 의한 질의 최적화를 할 수 있다. 또한 질의 처리 시스템의 구현 기법으로, 고수준의 질의어를 대수식으로 번역하는 알고리즘을 개발하고, 타입 검사와 타입 추론 기법을 기술한다. This paper presents a high-level and SQL-like query language based on a data model which supports both structured values and objects. The proposed query language can manipulate uniformly values and objects, provide powerful and easy operations for multi-level nested set values, and navigate easily complex objects of graph structures by path expressions. Because queries of this query language can be translated into algebraic expressions, the query language is suitable for formal analysis and optimization of queries. This paper also describes the algorithm to translate the queries into algebraic expressions and the method of type checking and type inference.
김성기(Seonggi Kim),이석호(Sukho Lee) 한국정보과학회 1992 한국정보과학회 학술발표논문집 Vol.19 No.1
복합 객체는 상호 연관된 객체들의 집합으로 투플이나 투플의 집합도 복합 객체의 구성요소가 될 수 있으며, CAD/CAM, 사무 정보 시스템 등의 새로운 데이타베이스 응용에서 복합 객체를 표현하고 처리하는 것은 매우 중요하다. 본 논문에서는 구조화 값과 객체 식별성을 지원하는 복합 객체 모델과 대수 연산을 소개하며, SQL 유형의 질의어를 제시한다. 제시된 질의어는 고수준의 복합 객체 질의어로서, 특히 여러 단계로 중첩된 집합에 대하여 용이한 질의 기능을 갖는다. 또한 질의를 대수 연산으로 변역하여 처리하는 질의 처리 기법을 설명한다.