http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Fuat Köksal,Juan J. del Coz Diaz,Osman Gencel,Felipe P. Alvarez Rabanal 사단법인 한국계산역학회 2013 Computers and Concrete, An International Journal Vol.12 No.3
In this paper, the properties of the cement mortar modified with styrene acrylic ester copolymer were investigated. Expanded vermiculite as lightweight aggregate was used for making the polymer modified mortar test specimens. To study the effect of polymer–cement ratio and vermiculite-cement ratio on various properties, specimens were prepared by varying the polymer–cement and vermiculite-cement ratios. Tests of physical properties such as density, water absorption, thermal conductivity, three-point flexure and compressive tests were made on the specimens. Furthermore, a coupled thermal-structural finite element model of an entire corner wall was modelled in order to study the best material configuration. The wall is composed by a total of 132 bricks of 120 × 242 × 54 size, joined by means of a contact-bonded model. The use of advanced numerical methods allows us to obtain the optimum material properties. Finally, comparisons of polymer–cement and vermiculite-cement ratios on physical properties are given and the most important conclusions are exposed.
Numerical investigation of truck aerodynamics on several classes of infrastructures
Alonso-Estebanez, Alejandro,del Coz Diaz, Juan J.,Rabanal, Felipe P.A lvarez,Pascual-Munoz, Pablo,Nieto, Paulino J. Garcia Techno-Press 2018 Wind and Structures, An International Journal (WAS Vol.26 No.1
This paper describes the effect of different testing parameters (configuration of infrastructure and truck position on road) on truck aerodynamic coefficients under cross wind conditions, by means of a numerical approach known as Large Eddy Simulation (LES). In order to estimate the air flow behaviour around both the infrastructure and the truck, the filtered continuity and momentum equations along with the Smagorinsky-Lilly model were solved. A solution for these non-linear equations was approached through the finite volume method (FVM) and using temporal and spatial discretization schemes. As for the results, the aerodynamic coefficients acting on the truck model exhibited nearly constant values regardless of the Reynolds number. The flat ground is the infrastructure where the rollover coefficient acting on the truck model showed lowest values under cross wind conditions (yaw angle of $90^{\circ}$), while the worst infrastructure studied for vehicle stability was an embankment with downward-slope on the leeward side. The position of the truck on the road and the value of embankment slope angle that minimizes the rollover coefficient were determined by successfully applying the Response Surface Methodology.