http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Dual-frequency GPS Cycle Slip Detection and Repair Based on Dynamic Test
Jianying Wang,Dewu Huang 대한토목학회 2023 KSCE Journal of Civil Engineering Vol.27 No.12
How to solve the multi-values and accurately detect the cycle slip of each frequency was particularly critical of dual-frequency GPS. This paper used the geometry-free phase combinations, proposed a dynamic test method to detect cycle slip outliers, which determined the cycle slip by constraining the value range of the cycle slip sequences of the dual-frequency GPS through the constantly updated its standard deviation. The dynamic test of cycle slip detection and repair method has been tested by using GPS data with sampling interval of 1s, 5s, 10 s and 15s.The method can not only solve the problem of multi-values, but also accurately detect the cycle slip values at various frequencies, whether the fixed cycle slip is added to the random position or the random cycle slip is added to the random position. Experiments with four different sampling intervals, the results showed that the proposed method of cycle slip detection and repair calculation success rate reaches 98.75%.
Experimental Study on the Damage of Steel Tubular Structural Components by Near-Field Detonations
Wanyue Wang,Shaobo Geng,Hua Wang,Wenqiang Li,Yaling Liu,Jianying Xue,Tingbian Zhan,Ying Gao 대한토목학회 2021 KSCE Journal of Civil Engineering Vol.25 No.2
This paper describes three blast-loading trials on three kinds of steel tubular structural components at the same explosive charge and standoff distance. Specimen one is a hollowsteel tube (HST), another is a HST wrapped with glass fibre-reinforced plastic (GFRP) with epoxy resin and the third is a HST infilled with concrete. The main objective of the trials is to investigate the effect of near-field detonations on circular steel tubular components. The experimental data, such as the overpressure time history, front local deformation, rear residual deflection and strain time history, are all recorded and collected. Analysis of the trial results shows that the experimental peak overpressure values of shot 1-3 are all larger than that of numerical simulation. The failure of these three specimens mainly experiences local damage, at the same time, the HST and HST with GFRP exhibit obvious global deformation. With the initiation point at one end of the cylinder explosive, both the maximum depth deformation on the front surface and the maximum residual deflection on the rear surface are all located on the side of the another end of the cylinder explosive. The blast-resistant approach by covering 10-layer GFRP on the surface of the HST can reduce the local damage, the global deformationand the dynamic strain value to certain extent, while the approach by infilling the steel tube with concrete can greatly decrease the local damage and the dynamic strain value and without any global deformation.
Design of Test Platform for Concentrator based on Virtual Electric Energy Meter
Jianying Fan,Hui Sun,Yang Wang,Dongqing Shi 보안공학연구지원센터 2016 International Journal of Hybrid Information Techno Vol.9 No.9
For the current test of concentrator relay routing learning function in the laboratory, based on the hardware cost and the deployment environment, unable to realize large-scale electric energy meter group network, and real scene environment cannot be simulated. In order to solve these problems, the design of test platform for concentrator based on virtual electric energy meter is proposed in this paper. The design aims to simulate the communication routing network algorithm of electric energy meter and help the communication instruction to establish an optimal topology network which through using the specified data source, target source and the route address. So the concentrator can get the specific data through this preset network. This paper have also observed and analyzed the hierarchy order topology and compared with the autonomous learning topology of the concentrator relay routing algorithm. Then verify the deviation between communication routing topology and preset value, and eliminate the deviation. At the same time, verify whether the relay routing algorithm can get the optimal communication topology network.
A Novel Polymer Membrane for Extraction Applications
Wang, Xungai,Xu, Jianying,Paimin, Rohani,Shen, Wei The Korean Fiber Society 2002 Fibers and polymers Vol.3 No.2
In this study, a new type of Aliquat 336/PVC membrane has been made for extraction experiments. This new membrane is capable of holding more Aliquat 336 than previously developed extraction membranes, hence overcoming a major problem that has confronted many researchers for a long time. The new membrane has been used try investigate the rate of extraction fur the Cd(II) ion in 2.0 M HCI solution and the effect of membrane thickness on the rate of extraction. The experimental results have shown this new membrane has a promising future in relevant industrial applications. A new method is also used in this study to qualitatively identify the oily substance on the surface of membrane after the extraction experiment was completed. This oily substance has been found to be Aliquat 336.
An Investigation of Solubility of Aliquat 336 in Different Extracted Solutions
Xu, Jianying,Paimin, Rohani,Shen, Wei,Wang, Xungai The Korean Fiber Society 2003 Fibers and polymers Vol.4 No.1
A major concern in solvent extraction process is the loss of extractant into the aqueous phase due to its slight solubility in the aqueous phase. Similarly, in membrane extraction processes, extractant loss through extractant leakage from the membrane into the aqueous phase is also a concern. Several published membrane extraction studies using Aliquat 336 ai the extractant, have expressed this concern, but none has studied extractant leakage quantitatively. It is the authors' opinion that the extractant leakage should be considered at a technical parameter of a membrane. In our laboratory active progress has been made in using Aliquat 336 ‘entangled’ into the polymer membranes to remove heavy metal ions from wastewater samples. In this work, we studied the loss of Aliquat 336 from the point of view of its solubility in aqueous solutions. The results showed that the solubilities or Aliquat 3,36 in an aqueous phase acidified with 2 M HCI it about 0.1 g/100 m/ of the solution. This figure provides a useful guideline for evaluating the leakage of the Aliquatoat 336 extractant from the membranes.
Fast cycle life evaluation method for ternary lithium‑ion batteries based on divided SOC intervals
Qiuting Wang,Jiani Sun,Hong Wu,Wei Qi,Hui Jin,Li Ling 전력전자학회 2022 JOURNAL OF POWER ELECTRONICS Vol.22 No.5
Ternary lithium-ion batteries are commonly used in electrical power systems. It is necessary to accurately estimate the life characteristics of the battery cell/pack under specific cycle conditions. In this article, the empirical model of the capacity attenuation value is improved, and a mathematical model of the capacity attenuation rate is established. The cell capacity value based on the entire state of charge (SOC) interval and the divided SOC intervals are identified. The difference between them is calculated and analyzed. A multiple regression model is presented to describe the linear relationship between the health state parameters and the capacity value of a ternary lithium-on battery. Finally, an accelerated aging test is introduced, and a fast cycle life evaluation method is proposed. The proposed method is validated with experimental data under different charge/discharge currents. The obtained results show that the new model and the algorithms trained by divided SOC intervals are effective. They also show that the cycle life estimation error can be ranged within 3%. In addition, the cycle time of the aging test can be reduced to about one fifth of that with the traditional method.