http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Spectral Analysis of Rectangular, Hanning, Hamming and Kaiser Window for Digital Fir Filter
Ganesh Gautam,Surendra Shrestha,Seongsoo Cho 한국인터넷방송통신학회 2015 Journal of Advanced Smart Convergence Vol.4 No.2
Digital filters are extensively used in the world of communication. In order to design a digital finite impulse response (FIR) filter that satisfies all the required conditions is challenging. In this paper, design techniques of digital low pass FIR filters using Rectangular window method, Hamming window, Hanning window, and Optimal Parks McClellan method are presented. The stability, number of components required and filter coefficients are demonstrated for different design techniques. It is demonstrated that filter design using hamming window is comparatively better than rectangular and hanning window though the components required for all of the windowing technique are same, hamming shows higher stability. The stability is shown with the help of magnitude and phase spectrum of each window. Simulation is carried out using MATLAB and comparisons are made entirely based on the output of the simulation.
Novel Approach: Testing and Computing Periodicity of Continuous Time Signal
Ganesh Gautam,Surendra Shrestha 한국디지털융합학회 2017 IJICTDC Vol.2 No.1
Periodic signals are those which repeat itself after certain interval of time. The time after which it repeats is called as the period of the signal. Periodic signals are used almost everywhere in application of electrical engineering such as, supply of electricity means supplying AC voltage constantly. This supply of ac is periodic waveform [1]. Continuous time sinusoids are periodic if they are not truncated and period of this type of signal can be predicted in advanced just comparing the angular frequency (w). Whenever addition or multiplications of two or more sinusoids or any other continuous time signals are involved then it is not that simple to find the period of the resulting signal [2]. All the cases of addition and multiplication of different types of continuous time signals were taken into account and the result were obtained from MATLAB. Findings were analyzed and generalized being based on the result obtained from MATLAB. When addition of two or more continuous time signals takes place, the period of resulting signal is the Least Common Multiple (LCM) of the period of individual signal. When multiplication of two or more continuous time signal are involved the period of resulting signal is the half the value of Least Common Multiple (LCM) of the period of individual signal, if any one of the signal has both positive and negative amplitude. Else the period of the resulting signal is Least Common Multiple of the period of individual signal. When addition of two or more continuous time signal are involved the period of resulting signal is the value of Least Common Multiple (LCM) of the period of individual signal, even if any one of the signal has both positive and negative amplitude. Generally Continuous time Fourier series is performed to obtain the spectrum either that may be magnitude spectra or phase spectra. Periodicity and the period of the signal are vital for representing time domain signal to frequency domain.
Spectral Analysis of Rectangular, Hanning, Hamming and Kaiser Window for Digital Fir Filter
Gautam, Ganesh,Shrestha, Surendra,Cho, Seongsoo The Institute of Internet 2015 Journal of Advanced Smart Convergence Vol. No.
Digital filters are extensively used in the world of communication. In order to design a digital finite impulse response (FIR) filter that satisfies all the required conditions is challenging. In this paper, design techniques of digital low pass FIR filters using Rectangular window method, Hamming window, Hanning window, and Optimal Parks McClellan method are presented. The stability, number of components required and filter coefficients are demonstrated for different design techniques. It is demonstrated that filter design using hamming window is comparatively better than rectangular and hanning window though the components required for all of the windowing technique are same, hamming shows higher stability. The stability is shown with the help of magnitude and phase spectrum of each window. Simulation is carried out using MATLAB and comparisons are made entirely based on the output of the simulation.
A comparative evaluation of cytotoxicity of root canal sealers: an in vitro study
Gautam Pyarelal Badole,Manjusha Madhukar Warhadpande,Ganesh Kothiramji Meshram,Rakesh Namdeoraoji Bahadure,Shubha Gopal Tawani,Shital Gautam Badole 대한치과보존학회 2013 Restorative Dentistry & Endodontics Vol.38 No.4
Objectives The objective of this in vitro study was to evaluate and compare the cytotoxicity of four different root canal sealers i.e. Apexit Plus (Ivoclar Vivadent), Endomethasone N (Septodont), AH-26 (Dentsply) and Pulpdent Root Canal Sealer (Pulpdent), on a mouse fibroblast cell line (L929). Materials and Methods Thirty two discs for each sealer (5 mm in diameter and 2 mm in height) were fabricated in Teflon mould. The sealer extraction was made in cell culture medium (Dulbecco's Modified Eagle's Medium, DMEM) using the ratio 1.25 cm2/mL between the surface of the sealer samples and the volume of medium in a shaker incubator. Extraction of each sealer was obtained at 24 hr, 7th day, 14th day, and one month of interval. These extracts were incubated with L929 cell line and 3-(4,5-dimethylthiazol-2yl)-2,5-diphenyltetrazolium bromide (MTT) assay was done. Two-way ANOVA for interaction effects between sealer and time and Post-hoc multiple comparison using Tukey's test across all the 16 different groups were used for statistical analysis. Results Apexit Plus root canal sealer was significantly less toxic than other sealers (p < 0.05) and showed higher cellular growth than control. Endomethasone N showed mild cytotoxicity. AH-26 showed severe toxicity which became mild after one month while Pulpdent Root Canal Sealer showed severe to moderate toxicity. Conclusions Apexit Plus was relatively biocompatible sealer as compared to other three sealers which were cytotoxic at their initial stages, however, they became biocompatible with time. Objectives The objective of this in vitro study was to evaluate and compare the cytotoxicity of four different root canal sealers i.e. Apexit Plus (Ivoclar Vivadent), Endomethasone N (Septodont), AH-26 (Dentsply) and Pulpdent Root Canal Sealer (Pulpdent), on a mouse fibroblast cell line (L929). Materials and Methods Thirty two discs for each sealer (5 mm in diameter and 2 mm in height) were fabricated in Teflon mould. The sealer extraction was made in cell culture medium (Dulbecco's Modified Eagle's Medium, DMEM) using the ratio 1.25 cm2/mL between the surface of the sealer samples and the volume of medium in a shaker incubator. Extraction of each sealer was obtained at 24 hr, 7th day, 14th day, and one month of interval. These extracts were incubated with L929 cell line and 3-(4,5-dimethylthiazol-2yl)-2,5-diphenyltetrazolium bromide (MTT) assay was done. Two-way ANOVA for interaction effects between sealer and time and Post-hoc multiple comparison using Tukey's test across all the 16 different groups were used for statistical analysis. Results Apexit Plus root canal sealer was significantly less toxic than other sealers (p < 0.05) and showed higher cellular growth than control. Endomethasone N showed mild cytotoxicity. AH-26 showed severe toxicity which became mild after one month while Pulpdent Root Canal Sealer showed severe to moderate toxicity. Conclusions Apexit Plus was relatively biocompatible sealer as compared to other three sealers which were cytotoxic at their initial stages, however, they became biocompatible with time.
A comparative evaluation of cytotoxicity of root canal sealers: an in vitro study
Badole, Gautam Pyarelal,Warhadpande, Manjusha Madhukar,Meshram, Ganesh Kothiramji,Bahadure, Rakesh Namdeoraoji,Tawani, Shubha Gopal,Tawani, Gopal,Badole, Shital Gautam The Korean Academy of Conservative Dentistry 2013 Restorative Dentistry & Endodontics Vol.38 No.4
Objectives: The objective of this in vitro study was to evaluate and compare the cytotoxicity of four different root canal sealers i.e. Apexit Plus (Ivoclar Vivadent), Endomethasone N (Septodont), AH-26 (Dentsply) and Pulpdent Root Canal Sealer (Pulpdent), on a mouse fibroblast cell line (L929). Materials and Methods: Thirty two discs for each sealer (5 mm in diameter and 2 mm in height) were fabricated in Teflon mould. The sealer extraction was made in cell culture medium (Dulbecco's Modified Eagle's Medium, DMEM) using the ratio 1.25 $cm^2/mL$ between the surface of the sealer samples and the volume of medium in a shaker incubator. Extraction of each sealer was obtained at 24 hr, 7th day, 14th day, and one month of interval. These extracts were incubated with L929 cell line and 3-(4,5-dimethylthiazol-2yl)-2,5-diphenyltetrazolium bromide (MTT) assay was done. Two-way ANOVA for interaction effects between sealer and time and Post-hoc multiple comparison using Tukey's test across all the 16 different groups were used for statistical analysis. Results: Apexit Plus root canal sealer was significantly less toxic than other sealers (p < 0.05) and showed higher cellular growth than control. Endomethasone N showed mild cytotoxicity. AH-26 showed severe toxicity which became mild after one month while Pulpdent Root Canal Sealer showed severe to moderate toxicity. Conclusions: Apexit Plus was relatively biocompatible sealer as compared to other three sealers which were cytotoxic at their initial stages, however, they became biocompatible with time.