http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
비대칭 연결재를 갖는 조립식 압축부재의 좌굴 거동에 관한 실험 연구 1 : 연결재 간격의 영향
강상훈(Kang Sanghoon),한만엽(Han Manyop),조병두(Cho Byeongdu) 대한토목학회 2012 대한토목학회논문집 A Vol.32 No.4A
본 연구에서는 비대칭 연결재를 갖는 조립식 압축부재의 연결재 간격에 따른 좌굴 거동을 알아보기 위한 실 대형 실험을 실시하였다. 압축부재인 H-300 형강 10m 부재 3개를 볼트 연결하여 총 길이 30m가 되도록 2m 간격으로 2열 배치한 후 연결재 간격이 4m, 5 m, 6m인 경우에 대하여 압축 실험을 실시하였다. 본 논문에서는 연결재 간격에 따른 실험 좌굴 하중을 평가하고 이를 유한요소해석 좌굴하중 및 Timoshenko 식에 의한 좌굴하중과 비교·분석 하였으며, 연결재 간격의 증가에 따른 조립식 압축부재의 좌굴 거동으로 인한 종방향 변위, 횡방향 변위, 변형률 등을 분석하였다. 실험 결과 연결재 간격이 증가함에 따라 조립식 압축부재의 좌굴 하중은 비선형적으로 급격히 감소함을 할 수 있었다. 그리고 연결재 간격이 증가함에 따라 실험 좌굴 하중과 이론 좌굴 하중의 차이 및 실험 좌굴 하중과 유한요소해석 결과의 차이도 증가되는 것으로 나타났다. Structural behavior of built-up compression members with unsymmetric connectors under buckling status has been studied through these experiments. When the distance between adjacent H-300 beams of built-up compression member is 2 m in length, and the H-300 beams are lengthened up to 30 m in length with three-10 m-H-beams by bolts and double arrayed, three specimen having each connector interval 4 m, 5 m, 6 m are experimented for evaluating buckling loads. The buckling loads from the experiments are compared with buckling loads of structural analysis using FEM and buckling loads of Timoshenko Eq. loads in order to figure out how the connectors' interval affects on longitudinal and lateral displacements, also strain of the built-up compression members as well. The result shows that the buckling loads tend to sharply decrease non-linearly according to connectors' interval increases. As well as that, the differences between experimental buckling loads and theoretical buckling loads and between experimental buckling loads and structural analyses buckling loads also have a tendency to be increased as the connector interval increases.