http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
정명조,최순,송희갑,박근배,Jhung, Myung-Jo,Choi, Suhn,Song, Heuy-Gap,Park, Keun-Bae Computational Structural Engineering Institute of 1992 전산구조공학 Vol.5 No.3
원자로 내부구조물의 설계시 필요한 동적응답해석을 위하여 각 구조물의 정확한 진동특성을 파악할 필요가 있다. 한국 표준형 원자력발전소를 위하여 설계된 제어봉집합체 보호구조물은 기존의 설계로 부터 많은 설계변경이 있었고, 또 이 구조물은 튜우브와 얇은 판이 사각격자 형태로 이루어져 있고 연결봉에 의해 고정되는 등 매우 복잡한 형태로 구성되어 있어서 해석과 시험에 의한 진동측정 프로그램을 수행할 필요성이 대두되었다. 따라서 본 논문에서는 진동측정 프로그램의 첫 단계로서 범용구조해석코드인 ANSYS를 이용하여 시험전 해석을 수행하였다. 또 자유도의 수와 얇은 판에 있는 구멍 및 연결봉의 pre-load가 구조물의 자유진동수에 미치는 영향을 검토하였다. 이로부터 결정된 유한요소모델에 대하여 모우드해석을 수행하여 구조물의 고유진동수와 모우드형상을 구하였고, 조화운동해석(Harmonic Analysis)을 행하여 주요모우드에 대한 응답을 측정함으로써 추후에 수행될 진동측정 시험조건 즉 응답측정부위, 측정위치의 수, 측정진동수의 범위 및 가진력의 크기 등을 결정하였다. The design of reactor internals requires the accurate vibration characteristics of each component for subsequent dynamic structural response analysis. For Korean standard nuclear power plant some modifications on the Control Element Assembly shroud from the reference design have been made. Since the shroud is complex in geometry having an array of vertical round tubes and webs in a square grid pattern, and being tied down by preloaded tie rods into position, it is planned to perform a vibration measurement program consisting of both experimental and analytical modal studies upon that component. To determine the proper test conditions, the pre-test analysis has been performed using the general purpose structural analysis program ANSYS. Also the effects of the number of master degrees of freedom, holes in the web and tie-rod preload on the natural frequencies are examined prior to the pre-test analysis. After decision of appropriate finite element model, frequency analysis and harmonic analysis are performed and ideas for the test conditions such as the number of measurement points, their locations, measurement frequency range and the excitation force level are determined.
한국표준형 원자력발전소 제어봉집합체 보호구조물의 모우드 특성 II
정명조,박근배,송희갑,최순,Jhung, Myung-Jo,Park, Keun-Bae,Song, Heuy-Gap,Choi, Suhn Computational Structural Engineering Institute of 1992 전산구조공학 Vol.5 No.4
The design of reactor internals requires the accurate vibration characteristics of each component for subsequent dynamic structural response analyses. For Korean standard nuclear power plant some modifications on the Control Element Assembly shroud from the reference design have been made, Since the shroud is complex in geometry having an array of vertical round tubes and webs in a square grid pattern, and being tied down by preloaded tie rods into position, it is planned to perform a vibration measurement program consisting of both experimental and analytical modal studies upon that component. The shroud modal testing was performed on the low frequency global survey to measure the first several modes. The analysis using the finite element model was also performed for the as-tested conditions. The natural frequencies and mode shapes from both test and analysis have been acquired and compared to be in good agreement. It is concluded that finite element model generated is good enough to be used in the design for the dynamic response analysis under various loading conditions. 원자로내부구조물의 설계시 필요한 동적응답해석을 위하여 각 구조물의 정확한 진동특성을 파악할 필요가 있다. 한국표준형 원자력발전소를 위하여 설계된 제어봉집합체 보호구조물은 기존의 설계로 부터 많은 설계변경이 있었고, 또 이 구조물은 튜우브와 얇은 판이 사각격자형태로 이루어져 있고 연결봉에 의해 고정되는 등 매우 복잡한 형태로 구성되어 있어서 해석과 시험을 위한 진동측정프로그램을 수행할 필요성이 대두되었다. 따라서 본 논문에서는 보호구조물의 진동시험을 수행하여 동적특성을 구하였고 또한 유한요소모델을 이용하여 해석에 의해 시험조건하에서의 고유진동수와 모우드형상을 구하였다. 시험과 해석에 의한 모우드특성을 비교한 결과 매우 잘 일치함으로써 구조물의 동적응답을 구하기 위한 해석모델의 타당성을 보였다.
이재선(Jae-Seon Lee),최순(Suhn-Choi),김지호(Ji-Ho Kim),박근배(Keun-Bae Park),지성균(Sung-Quun Zee) 한국트라이볼로지학회 2005 한국윤활학회지(윤활학회지) Vol.21 No.6
Deep groove ball bearing is installed in a control element of an integral nuclear reactor, where water is used as coolant and lubricant. This bearing is made of STS440C stainless steel for the raceways and the balls to use in radioactive environment and water. It is known that the retainer design affects ball bearing operability and endurance life, however there is no verified retainer design and material for water lubricated ball bearing. Four kinds of retainers are manufactured for the endurance test of water lubricated deep groove ball bearing. Three of them are commercially developed types and the other is designed for this research. It is verified that ball bearings with steel pressed and general plastic retainer can not survive to required life in the water, however bearings with machined type and cylinder type retainer can survive. This proves that one of the major design parameters for water lubricated ball bearing is retainer type and material. In this paper, experimental research of endurance test for water-lubricated ball bearing are reported.
김종민(Jong-Min Kim),허남수(Nam-Su Huh),최순(Suhn Choi),박근배(Keun-Bae Park),최재붕(Jae-Boong Choi) 대한기계학회 2009 대한기계학회 춘추학술대회 Vol.2009 No.5
The fracture mechanics assessment parameters, such as the elastic stress intensity factor and the elastic-plastic J-integral, for a surface crack can be significantly affected by adjacent cracks. Regarding such an interaction effect, the relative distance between adjacent cracks, crack aspect ratio and loading condition were known to be important factors for multiple cracks, which affects the fracture mechanics assessment parameters. Although several guidance (ASME Sec. XI, BS7910, British Energy R6 and API RP579) on a crack interaction effect (crack combination rule) have been proposed and used for assessing the interaction effect, each guidance provides different rules for combining multiple surface cracks into a single surface crack. Based on the systematic elastic and elatic-plastic finite element analyses, the present study investigated the acceptability of the crack combination rules provided in the existing guidance, and the relevant recommendations on a crack interaction for in-plane surface cracks in a plate were discussed. To quantify the interaction effect, the elastic stress intensity factor and elastic-plastic J-integral along the crack front were used. As for the loading condition, only axial tension was considered. As a result, BS7910 seems to provide the most relevant crack combination rule for in-plane dual surface cracks, whereas API RP579 provides the most conservative results. In particular, ASME Sec. XI still seems to have some room for a revision to shorten the critical distance between two adjacent cracks for a crack combination. The overall tendency of the elastic-plastic analyses results is identical to that of the elastic analyses results.
탄성 유한요소해석을 이용한 동일 평면상에 존재하는 다중 표면균열의 균열상호작용 평가
허남수(Nam-Su Huh),김종민(Jong-Min Kim),최순(Suhn Choi),박근배(Keun-Bae Park),최재붕(Jae-Boong Choi),김영진(Young-Jin Kim) 대한기계학회 2008 대한기계학회 춘추학술대회 Vol.2008 No.5
The crack-tip stress fields and fracture mechanics assessment parameters, such as the elastic stress intensity factor and the elastic-plastic J-integral, for a surface crack can be significantly affected by adjacent cracks. Such a crack interaction effect due to multiple cracks can magnify the fracture mechanics assessment parameters. There are many factors to be considered, for instance the relative distance between adjacent cracks, crack shape and loading condition, to quantify a crack interaction effect on the fracture mechanics assessment parameters. Thus, the current guidance on a crack interaction effect (crack combination rule), including ASME Sec. XI, BS7910, British Energy R6 and API RP579, provide different rules for combining multiple surface cracks into a single surface crack. The present paper investigates a crack interaction effect by evaluating the elastic stress intensity factor of adjacent surface cracks in a plate along the crack front through detailed 3-dimensional elastic finite element analyses. The effects of the geometric parameters, the relative distance between cracks and the crack shape, on the stress intensity factor are systematically investigated. As for the loading condition, only axial tension is considered. Based on the elastic finite element results, the acceptability of the crack combination rules provided in the existing guidance was investigated, and the relevant recommendations on a crack interaction for in-plane surface cracks in a plate were discussed.
유한요소해석을 이용한 노즐 이종금속용접부의 용접잔류응력 예측
허남수(Nam-Su Huh),김종욱(Jong-Wook Kim),최순(Suhn Choi),김태완(Tae-Wan Kim) 대한기계학회 2008 대한기계학회 춘추학술대회 Vol.2008 No.11
The primary water stress corrosion cracking (PWSCC) of dissimilar metal weld based on Alloy 82/182 is one of major issues in material degradation of nuclear components. It is well known that the crack initiation and growth due to PWSCC is influenced by material’s susceptibility to PWSCC and distribution of welding residual stress. Therefore, modeling the welding residual stress is of interest in understanding crack formation and growth in dissimilar metal weld. Currently in Korea, a numerical round robin study is undertaken to provide guidance on the welding residual stress analysis of dissimilar metal weld. As a part of this effort, the present paper investigates distribution of welding resisual stress of a ferritic low alloy steel nozzle with dissimilar metal weld using Alloy 82/182. Two-dimensional thermo-mechanical finite element analyses are carried out to simulate multi-pass welding process on the basis of the detailed design and fabrication data. The present results are compared with those from other participants, and more works incorporating physical measurements are going to be performed to quantify the uncertainties relating to modelling assumptions.