http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
- 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
- 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
RISS 인기검색어
- 검색키워드
- 저자 : 최소영 ( So-yoeng Choi ) (검색결과 2 건)
- 무료
- 기관 내 무료
- 유료
-
국내 시범 생산 CFRP rod를 적용한 보 부재의 휨-전단 특성
최소영,김일순,최명성,양은익,Choi, So-Yoeng,Kim, Il-Sun,Choi, Myoung-Sung,Yang, Eun-Ik 한국구조물진단유지관리공학회 2022 한국구조물진단유지관리공학회 논문집 Vol.26 No.5
Replacement of FRP rod as steel reinforcement has been attracted significantly to prevent the degradation of the concrete structure due to corrosion. So, the technology development to extend the structure's service life by improving FRP properties has been proceeded worldwide. Accordingly, it is necessary to develop Korea's CFRP rod and CFRP grid, including the manufacturing techniques to improve the properties of high-strength and high-stiffness. Moreover, the research should be conducted to evaluate the structural behavior of the beams using the CFRP rod or grid. This study investigates the flexural and shear behavior of reinforced concrete beam using demonstrated CFRP rod as reinforcement according to the reinforcement ratio and shear span to depth ratio. From the results, when the reinforcement ratio is out of a specific range, it is seemed that the effect on performance improvement of the beam using CFRP rod is cancelled or not significant. Meanwhile, when the CFRP rod was used as reinforcement, the possibility of shear failure occurred, even steel stirrups were installed in the beam with CFRP rod as tensile reinforcement according to the Korean Design Standard. Therefore, when the CFRP rod is used as tensile reinforcement in a beam, it should be prepared that a specific limitation of reinforcement ratio and an investigation against shear failure. Also, the ductility of the beam using the CFRP rod is determined by the deformation energy evaluation method. So, the ductility should be investigated by applying the deformation energy evaluation method that reflects the structural behavior of the beam.
-
FRP를 보강근으로 사용한 콘크리트 부재의 휨-부착 거동 평가방법에 관한 연구
최소영 ( So-yoeng Choi ),최명성 ( Myoung-sung Choi ),김일순 ( Il-sun Kim ),양은익 ( Eun-ik Yang ) 한국구조물진단유지관리공학회 2021 한국구조물진단유지관리공학회 논문집 Vol.25 No.5
FRP 보강근은 철근-콘크리트 부재의 부식 문제를 해결하기 위해 제안되어왔으나, FRP는 높은 인장강도, 낮은 연성 및 선형 탄성 거동으로 인해 하중이 전달될 때 콘크리트와 보강재 사이의 부착 메커니즘이 다르다. 그러므로, FRP-Rebar와 콘크리트 사이의 부착 거동은 주의 깊게 검토해야 한다. 이를 위해 직접 인발 실험이 간단하게 부착 거동을 평가할 수 있으므로 사용됐으나, 직접인발의 실험 결과는 실제 FRP를 보강근으로 사용한 콘크리트 부재의 휨-부착 거동과 다르다. 그러므로 실제 휨-부착 거동을 평가할 방안이 필요하다. 본 연구에서는 FRP를 보강근으로 사용한 콘크리트 부재의 휨-부착 거동에 대한 평가방법을 검토하고 비교하였다. 그 결과, 겹침이음이 있는 부재의 실험 방법이 실제 휨-부착 특성을 잘 반영할 수 있으나 다른 실험방법보다 시험체의 단면 및 지간이 커야 하고 시험체의 설계 및 해석이 복잡하다. 한편, 아치가 있는 부재 실험은 모멘트 팔길이의 변화를 무시하는 평형 방정식을 기반으로 한 힌지가 있는 부재 실험과 달리 콘크리트의 영향을 반영할 수 있으나, 휨-부착에 의한 파괴 이전에 전단파괴의 우려가 있다. FRP has been proposed to replace the steel as a reinforcement in the concrete structures for addressing the corrosion issue. However, FRP-Rebar does not behave in the same manner as steel because the properties of FRP are different. For example, FRP-Rebar has a high tensile strength, low stiffness, and linear elastic behavior which results in a difference bonding mechanism to transfer the load between the reinforcement and the surrounding concrete. Therefore, bonding behavior between FRP-Rebar and concrete has to be investigated using the bonding test. So, Pull-out test has been used to estimate bond behavior because it is simple. However, the results of pull-out test have a difference with flexural-boding behavior of FRP-Rebar concrete member. So, it is needed to evaluate the real fleuxral-bonding behavior. In this study, the evaluation method to flexural-bonding behavior of FRP-Rebar concrete member was reviewed and compared. It was found that the most accurate evaluation method for the fleuxral-bonding behavior of FRP-Rebar concrete member was splice beam test, however, the size and length of specimen have to increase than other test method and the design and analysis of splice beam is complex. Meanwhile, characteristics of concrete could be reflected by using arched beam test, unlike hinged beam test which is based on the ignored change of moment arm length in equilibrium equation. However, the possibility of shear failure exists before the flexural-bonding failure occur.
ScienceON
KISS연관 검색어 추천
이 검색어로 많이 본 자료
활용도 높은 자료
