RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • SCOPUSKCI등재

        폴리에틸렌 / 육티탄산칼륨 휘스커 복합재료에 의한 축전지격리막의 제조에 관한 연구

        이완진,고만석,최병렬,조일훈 ( Wan Jin Lee,Man Seok Ko,Byung Ryul Choi,Il Hoon Cho ) 한국공업화학회 1998 공업화학 Vol.9 No.2

        초고분자량폴리에틸렌(UHMWPE), 고밀도폴리에틸렌(HDPE), process oil(mineral oil) 및 육티탄산칼륨 섬유로 구성되는 입자혼합물을 150℃에서 30분 동안 용융 혼합하고, 동일온도 및 5000 psi의 조건으로 압축성형을 하여 200㎛ 두께의 격리막 시험편을 제조한 후, process oil을 유기용매로 추출하여 PE층 사이에 미세공을 형성시켰다. 본 실험에서 시험편은 고분자와 process oil의 비율(PR)이 0.1 이하에서는 고무상이 되고 0.5 이상에서는 gel상으로 변하기 때문에, PR의 범위를 0.1-0.5 사이로 하였다. 시험편은 비극성 유기용매로 추출한 경우거의 98%의 process oil이 추출되었으며, PR이 증가함에 따라 무게감소율은 감소하였다. 인장강도는 PR이 0.426인 경우 31kg/㎠을 보였으며, 전해전기저항 값은 PR이 0.186 및 0.426에서 37 mΩ/㎠과 53 mΩ/㎠ 이었다. 질소 흡-탈착법에 의한 등온선은 모세관 응축영역을 나타내는 hysteresis를 가졌으며, PR=0.186인 경우 130 ㎡/g의 비교적 큰 표면적을 나타내었다. 이는 SEM의 분석 결과와 마찬가지로 PE배향층 사이에 육티탄산칼륨 섬유가 무작위로 잘 분산되었음을 보여주는 결과이며, host인 PE층 사이에 guest인 육티탄산칼륨 섬유가 층간되어 층상공을 형성한다고 추론할 수 있다. The mixtures of ultra-high molecular weight polyethylene (UHMWPE), high density polyethylene (HDPE), process oil (mineral oil) and potassium hexatitanate whisker were melted and mixed at 150℃ for 30 min, and prepared by compression molding to the specimen of separator of about 200㎛ thickness at the same temperature and 5000 psi. Thereafter the pores were formed by extracting process oil with organic solvents. In this study, the range of PR (the ratio polymer to process oil) was varied from 0.1 to 0.5 because the specimen turned into rubbery phase at which PR was below 0.1 whereas it changed into gel phase at which PR was above 0.5. When the specimen was treated with nonpolar organic solvents, process oil was extracted nearly 98%. Tensile strengh was 31 kg/㎠ at PR = 0.426, and resistance of specimen was 37 mΩ/㎠ at PR = 0.186, and 53 mΩ/㎠ at PR = 0.426. The N₂adsorption-desorption isotherm showed a hysteresis representing regions of capillary condensation, and the surface area at PR = 0.186 was relatively large as 130 ㎠/g. Potassium hexatitanate whisker was randomly dispersed in between PE layers. It might be that the whisker is intercalated through the PE thin layers oriented by compression.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼