http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
흰열이 있는 전열면의 R-113에서의 비등열전달에 관한 연구
조시기 대한설비공학회 2001 설비공학 논문집 Vol.13 No.6
This study investigate experimentally the effect of in height, thickness, and clearance on the boiling heat transfer. The heat surfaces having copper fin array is tested for pool boiling. The gas-liquid exchange interference is investigated based on fin array clearance. These test results can be applied to the design of tube bundle system. The fin height of 2 mm is found to be effective. Effects of heat transfer promotion reaches the highest level when the fin clearance is 0.5mm. Also, heat flux is increased when the fin thickness is smaller. But0.2 mm fin thickness is highly recommended.
조시기 한국에너지학회 2000 에너지공학 Vol.9 No.1
본 연구는 열에너지 교환을 목적으로 이용되는 환상휜의 비등열전달에서 간섭판의 영향을 고찰한 실험적인 연구이다. 휜과 인접한 간섭판의 간격과, 휜 높이의 변화에 따라 비등열전달에 미치는 영향을 구했다. 휜 간격은 단독 환상휜에 간섭판을 0.05mm에서 2mm 가지 6가지 종류, 그리고 휜 높이는 3 mm , 8mm, 13 mm 의 3 종류로 변화시켰다. 실험결과 휜 높이가 제일 큰 13 mm 간섭판 간격이 0.25mm 로 비교적 좁은 간격임에도, 핵비등영역에서는 열전달 촉진효과가있었다. 그러나 간섭판의 간격이 0.05mm 로 더좁아지면 저열류속 영역에서는 휜 간격 내에 유체가 유입이 어려워 휜 선단만에서의 비등열전달과 일치한다. 이러한 경향은 휜 높이가 작아져도 비슷하다. 또한 휜과 간섭판의 간격이 0.25mm이상이면 간섭판의 영향이 적어, 확대 전열면으로서 전열 촉진효과를 얻을 수 있다.
조시기,최경빈,강영규,Jho Shi-Gie,Choi Kyung-Bin,Kang Yung-Kyu 대한설비공학회 1986 설비저널 Vol.15 No.3
The performance of vertical and horizontal tubes with multiple fins of rectangular and triangular cross section was investigated theoretically for boiling heat transfer. A simple method for numerical program assuming one-dimensional heat flow was used to predict the performance of these finned tubes and their bundles. The object of the new study was to develop optimum fin design, especially in tube bundles, considering from a viewpoint to minimize the space in which the maximum heat flux density was expected.
조시기,이기우,박영재,조명재,Jho Shi Gie,Lee Ki Woo,Park Young Jae,Cko Myong Jae 대한설비공학회 1986 설비저널 Vol.15 No.2
Condensation heat transfer can be classified in dropwise condensation and filmwise condensation, and for the industrial purpose, the former is more useful than the latter because of the higher heat transfer rate. But it is difficult to maintain the dropwise condensation continuously since most of the metal surfaces become wetted after exposure to a condensing vapor over an extended period of time. To maintain dropwise condensation continuously , various surface coatings and promoters have been used recently, but these methods must be reconsidered about the durability of condensing surface. Therefore, in this study, evaporating method of various pure metals on the condensing surface has been performed to maintain dropwise condensation. The results have showed that the heat transfer rate of silver evaporating surface is higher than any other metal evaporating in dropwise area. Transition temperature and filmwise condensation curves are uniform regardless of kinds of evaporating metals.