http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
정경호,Chung, K. 한국전자통신연구원 1995 전자통신동향분석 Vol.10 No.1
정보화의 진전으로 정보가 경제활동에 있어서 새로운 추구대상이 되고 있으며, 산업과 사회전반에 걸쳐 정보통신의 이용이 확대되고 있다. 정보통신의 산업적 활용은 생산, 유통방식의 변화와 함께 "산업의 정보화"를 통한 생산성 향상 등 기업활동에 변화를 초래하고 있다. 그 결과 21C 국가경쟁력은 정보통신의 효율적 활용에 의해 좌우될 것이라는 인식하에 각국은 범국가적 차원에서 정보통신의 기반구조로서 B-ISDN구축사업을 실행하고 있으며, 우리나라도 초고속정보통신망의 구축을 위해 2015년까지 총 44.8조원의 투자를 계획하고 있다. 본 고에서는 정보통신의 산업적 역할과 영향분석을 통해 B-ISDN 구축에 따른 산업 및 경제적 성과를 조명해 보고자 한다.
김경태(K.T. Kim),김은수(E.S. Kim),황근춘(K. C. Hwang),정경호(K.H. Chung),조성록(S.R. Cho),박준건(J.K. Park) 한국해양환경·에너지학회 2006 한국해양환경공학회 학술대회논문집 Vol.2006 No.-
반폐쇄성 해역인 고현만의 중금속 분포 특성과 오염 역사를 파악을 위하여 표층 및 주상 퇴적물조사를 수행하였다. 표층 퇴적물의 경우 조선소 배출구 주변에서 Cu와 ZN이 높은 농도를 나타내었으며, 만 내측에서 외측으로 가면서 급격하게 감소하는 경향을 보였다. 정점 2와 6의 주상 퇴적물에서 Cu, Zn, Cd 및 Pb 등의 중금속은 1920년부터 1970년까지 완만하게 증가하였으나 1970년부터 2000년까지는 급격한 증가 추세를 나타내었고, 이후엔 감소하였다. 고현만 해역의 높은 Cu와 Zn은 신조선 건조와 선박활동에 기인한 것으로 한 생각된다. In order to investigate spatial and temporal distribution of heavy metals in sediments of Gohyun Bay, one of the semi-enclosed bays in Korea. Highly elevated Cu and Zn contents were found in surface sediments near shipyard effluent outlet. Metal contents in the surface sediments steeply decreased towards of coast. Cu and Zn contents are Heavy metal(Cu, Zn, Cd and Pb) contents in sediment cores from St. 2 and 6 slowly increased during the period of 1920-1970, rapidly increased during 1970-2000, and followed by slight decrease after 2000. The highest value of metal(Cu, Zn, Cd and Pb) excesses among the sediment cores were found at St. 2. The hot spots for Cu and Zn in this bay are likely to result from ship building and activities.
김경태(K.T. Kim),김은수(E.S. Kim),조성록(S.R. Cho),정경호(K.H. Chung),박준건(J.K. Park),강병석(B.S. Kang),서현석(H.S. Seo) 한국해양환경·에너지학회 2004 한국해양환경공학회 학술대회논문집 Vol.2004 No.-
Dissolved heavy metals in surface waters of the Saemangeum area observed relatively high temporal and spatial variations. High concentrations of some metals except for Cd were found in the sampling sites of Mankyoung river estuary and inner parts of Saemangeum area. Due to desorption from Cd from suspended solids in saline water, dissolved Cd concentrations were high in the high salinity zone and low in the low salinity. Almost dissolved and particulate metal concentrations of this study were similar to the previous data in this area. However, the average contents of particulate Ni and Cd were two and five times higher than those in the previous data, respectively. In November, the DM/TM ratios were low due to relatively high SS concentrations. The average DM/TM except for DM/TM ratio in November were to the order of Cd(89.2%)>Cu(80.3%)>Ni(76.0%)>Co(47.2%)>Zn(30.6%)>Pb(23.2%).
김경태(K.T. Kim),김은수(E.S. Kim),조성록(S.R. Cho),정경호(K.H. Chung),박준건(J.K. Park),서현석(H.S. Seo) 한국해양환경·에너지학회 2004 한국해양환경공학회 학술대회논문집 Vol.2004 No.-
The study was carried out to understand the distribution of heavy metals in aquatic environmental samples of the Lake Shihwa. The environmental samples(surface seawater and sediments, settling particulate matters and aquatic organisms) were collected in 2003. Due to extreme pollutant discharge from various kids of anthropogenic sources such as the Banweol and Shihwa Industrial Complexes and cities, the Lake Shihwa has been polluted in waters, sediments and settling particulate matters with various heavy metals. Although the environmental qualities of heavy metals in the lake have been improved partially due to inflow of outer seawater, it is not clear to reach a good environmental quality. Therefor, further environmental programs should be conducted continuously for environmental improvement.
표면 활성화된 폐 EPDM 분말의 물성과 냄새 성분 분석 연구
최종만 ( J. Choi ),김섭 ( S. Kim ),정경호 ( K. Chung ),정진수 ( J. Chung ),유태욱 ( T. Yoo ),양준호 ( J. Yang ) 한국고무학회 2007 엘라스토머 및 콤포지트 Vol.42 No.4
본 연구에서는 웨더스트립 공정스크랩인 폐 EPDM을 재활용하기 위해 고온전단분쇄기를 이용하여 표면활성화 된 EPDM 분말을 제조하여 이의 물성과 냄새성분분석에 관한 연구를 수행하였다. 본 연구에서 사용되어진 폐 EPDM은 solid, sponge, solid+sponge, solid+metal형으로서 입도분석과 SEM을 통해 입자크기와 입도 분포도를 조사하였고, 가교제를 첨가하여 활성화 된 분말표면의 재가교 여부를 조사하였다. Solid형의 경우 가장 좁은 입도 분포도와 작은 입자크기, 상대적으로 높은 인장 물성을 나타내었다. 화학적 표면 탈황을 유도하기 위해 표면 활성화제를 첨가한 결과 표면활성화제의 첨가량이 증가할수록 효율적인 탈황이 유도되었다. TPE제조를 위해 폴리올레핀과의 블렌드 시 활성화된 EPDM 분말의 동적가황 가능성을 확인하기 위하여 가교제를 첨가하여 반응을 진행한 결과 황을 첨가할 경우 가교반응이 진행되지 않았고, DCP(dicumyl peroxide)의 경우 6 phr이 첨가되었을 때 효율적인 표면 가교반응 및 최적의 인장 물성을 나타내었다. 화학적 표면 활성화를 유도한 폐 EPDM 분말의 경우 표면활성화제의 첨가로 인해 냄새가 발생되는데, 이를 제거하기 위하여 수분흡착 공정과 rose oil 첨가 공정을 진행하였으며 GC/MS를 통해 냄새 성분을 분석하였다. In this study, the EPDM powder which was surface activated by high temperature and shear pulverization process was prepared and the mechanical properties and odor material analysis were investigated. Analysis for particle size and size distribution of waste of the EPDM powder has been performed. The waste EPDMs used in this study were 4 types of solid, sponge, solid+sponge, and solid+metal. According to the results, the solid type showed the smallest particle size among the 4 types of EPDM powder. Effective surface devulcanization of EPDM powder could be obtained by the addition of the reclaiming agent. The dicumyl peroxide was considered as the best crosslink agent for dynamic vulcanization when the surface activated EPDM powder was blended with polyolefin in order to make TPE. Also, the optimum amounts of DCP was 6 phr in terms of surface crosslink reaction and mechanical properties of EPDM powder. The processes of water adsorption and rose oil addition were employed to remove the odor of EPDM powder caused by reclaiming agent. The GC/MS was used to analyze the odor compounds.