http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
고정익 무인항공기를 이용한 공간정보 구축의 활용성 평가
Park, Young Jin(박영진),Jung, Kap Yong(정갑용) 대한공간정보학회 2014 대한공간정보학회지 Vol.22 No.4
최근 재해 예방 및 공간정보 구축 분야에 경제적이고, 효율이 높은 무인항공기에 대한 관심이 증가하고 있다. 그러나 무인항공기에 대한 높은 관심에도 불구하고 이에 대한 정확도 검증이나 활용성 평가에 대한 연구는 충분히 이루어지지 못하고 있다. 이에 본 연구에서는 고정익 무인항공기를 이용하여 DSM과 정사영상을 생성하고, GNSS 측량과 비교하여 정확도를 평가하였다. 연구를 통해 무인항공기에 의한 정사영상은 축척 1:1,000 수치지도 갱신에 활용이 가능함을 제시하였다. 또한 지상라이다를 이용하는 방법과 인력 및 시간의 비교를 통해 고정익 무인항공기의 활용성을 평가하였다. These days, inexpensive and high efficiency UAV of disaster prevention and spatial information has been given more attention. But studies about test of accuracy of UAV were not enough despite high interest. This research produced DSM and ortho photo and estimated accuracy by comparing coordinates with GNSS survey to evaluate outcome of fixed wing UAV. The ortho photo was found to make use of it to update 1/1,000 map. This research investigated spatial information construction using existing terrestrial LiDAR to suggest effectiveness of fixed wing UAV.
박준규(Joon-Kyu Park),정갑용(Kap-Yong Jung) 한국산학기술학회 2015 한국산학기술학회 학술대회 Vol.2015 No.1
국토교통부 국토지리정보원은 2011년 3월에 발생한 일본 대지진이 우리나라에 미친 정확한 영향을 분석하기 위하여 관계기관과 전문가의 협의를 거쳐 국가기준점 위치 값 변동계산 결과에 대한 검증을 수행하였으며, 이를 통해 2014년 새로운 국가기준점 좌표를 고시하였다. 본 연구에서는 국가기준점 좌표 변화에 따른 GPS 측량 성과의 차이를 분석하였다. 새로운 고시좌표를 적용하여 서울시에서 운영하고 있는 5개 위성기준점 성과를 계산하고, 2012년 서울시에서 고시한 성과와 비교를 수행하였다. 연구를 통해 국가기준점 좌표변화에 따른 GPS 측량성과 차이를 정량적으로 산출하였다.
무인항공 경사사진을 이용한 3차원 모델 생성 및 정확도 평가
박준규(Joon-Kyu Park),정갑용(Kap-Yong Jung) 한국산학기술학회 2019 한국산학기술학회논문지 Vol.20 No.3
공간정보 관련 분야는 위치정보를 취득할 수 있는 센서 및 자료처리 기술의 발달로 빠른 속도로 변화하고 있으며, 이와 연관된 각종 산업과 사회적 활동에서 수요가 커지고 있는 실정이다. 누구나 보기 쉽고 이해가 빠른 3차원 공간정보의 구축과 활용은 관련 서비스의 품질과 신뢰도 향상에 필수적인 요소라 할 수 있다. 최근에는 3차원 공간정보 구축 기술로 3D 레이저 스캐너가 많이 활용되고 있지만 3D 레이저 스캐너는 대상물의 규모가 크거나 형상이 복잡한 경우, 데이터 취득이 되지 않는 음영지역이 발생할 수 있으며, 장비의 이동 및 설치 횟수가 많아질수록 작업의 효율이 떨어지는 단점이 있다. 이에 본 연구에서는 무인항공기를 이용하여 경사사진을 취득하고, 자료처리를 통해 대상물의 3차원 모델을 생성하고자 하였다. 연구대상지를 선정하고, 무인항공기를 이용해 경사사진을 취득하였으며, 자료처리를 통해 0.02m의 간격을 가지는 포인트클라우드 형태의 3D 모델을 생성하였다. 3D 모델의 정확도 평가 결과는 최대 0.19m, 평균 0.11m로 나타났으며, 축 방향에 따른 편차의 경향성은 나타나지 않았다. 향후, 촬영 및 자료처리 방법에 따른 정확도 평가와 카메라 종류에 따른 3D 모델 구축과 정확도 평가 및 분석이 이루어진다면 3D 모델의 정확도를 개선할 수 있을 것이며, 포인트클라우드 형태의 3D 모델은 거리 및 면적의 측정, 단면 생성, 대상물의 도면화 등 다양한 활용이 가능하여 공간정보 서비스 및 관련 업무의 작업 효율성을 향상시킬 수 있을 것이다. The field of geospatial information is rapidly changing due to the development of sensor and data processing technology that can acquire location information. And demand is increasing in various related industries and social activities. The construction and utilization of three dimensional geospatial information that is easy to understand and easy to understand can be an essential element to improve the quality and reliability of related services. In recent years, 3D laser scanners are widely used as 3D geospatial information construction technology. However, 3D laser scanners may cause shadow areas where data acquisition is not possible when objects are large in size or complex in shape. In this study, 3D model of an object has been created by acquiring oblique images using an unmanned aerial vehicle and processing the data. The study area was selected, oblique images were acquired using an unmanned aerial vehicle, and point cloud type 3D model with 0.02 m spacing was created through data processing. The accuracy of the 3D model was 0.19m and the average was 0.11m. In the future, if accuracy is evaluated according to shooting and data processing methods, and 3D model construction and accuracy evaluation and analysis according to camera types are performed, the accuracy of the 3D model will be improved. In the point cloud type 3D model, Cross section generation, drawing of objects, and so on, it is possible to improve work efficiency of spatial information service and related work.