http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
임선기 한국화학공학회 1979 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.17 No.3
수평식 관형 Reverse Osmosis에서 격막을 통한 물의 생산량은 축방향에 따라 감소한다는 종래의 해석과는 달리, 입구에서 조금 지나면 일정해진다는 것이 여러 실험결과로 부터 알려지고 있는데, 이것은 농도차이로 인한 자연 대류 현상 때문이라고 믿어진다. Prandtl 수가 큰 경우의 열전달 문제에 이미 적용되었던 것과 마찬가지 방법의 무차원 해석으로부터 간략화되어 얻어진 이차 운동에 관한 편미분 방정식을 적분방법으로 풀었다. 농도 Polarization과 물의 투과속도를 Reverse Osmosis의 성능으로 볼 때, 관의 맨윗쪽이 관벽 주위의 다른 위치에서 보다 더 좋은 것으로 나타났다. 얻어진 결과로부터, 사입유체의 농도, 운전압력, 관의 직경이 성능에 미치는 영향을 예측할 수 있다. Axial invariance of production performance encountered in a horizontal tubular reverse osmosis has been analyzed by assuming that the free convection is the dominant transport mechanism. The governing equations, which had been deduced from dimensional analyses used in heat transfer problem with a large Prandtl number, have been solved approximately by the integral method. The numerical computations show that the system performance in terms of concentration polarization and wall permeation velocity, even if axially constant, is better at the top of the tube than at any other circumferential positions. The effects of system parameters such as feed concentration level, operating pressure and tube radius can also be explained from the results obtained.
임선기,정창복,장용근,안용수,이태영 한국화학공학회 1980 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.18 No.5
에틸렌 옥사이드와 28% 암모니아수로부터 액상에서 에탄올 아민을 만들 경우, 반응온도, 원료몰비 (암모니아/에틸렌 옥사이드), 물의 농도, 원료에 포함되는 에탄올 아민등이 에탄올아민(모노-디-트리 에탄올 아민)의 생성물 분포에 미치는 영향을 회분식 및 연속식 반응 실험을 통해 고찰하였다. 물질 수지식으로부터 생성물 분포는 각속도 상수의 절대값과는 무관하고 속도 상수사이의 비율에 따라 결정됨을 알 수 있었으며 실험 조건인 50∼90℃ 범위에서 반응 온도는 생성물 분포에 거의 영향을 미치지 않았다. 반면 원료 몰비가 생성물 분포에 미치는 영향은 가장 커서 암모니아가 많아질수록, 모노 에탄올아민의 생성율은 증가하나, 트리 에탄올 아민의 생성율은 감소하며, 디 에탄올 아민의 생성율은 조금 증가하다가 다시 감소하였다. 혼합물 중의 물은 에탄올 아민 자체와 함께 촉매작용을 하며 물의 농도가 높을 수록 모노 에탄올 아민의 생성율이 증가한다. 생성물 분포를 조절하기 위해서는 모노 및 디 에탄올 아민을 원료에 첨가하거나, 환류시킬 수 있으나 주어진 원료 몰비 (암모니아/에틸렌 옥사이드)에 대하여 첨가 또는 환류시킬 수 있는 양에는 상한이 있으며, 이 계의 생성물 분포는 에탄올 아민이 원료에 첨가되지 않은 실험으로부터 얻어진 속도 상수비 값을 그대로 사용해도 신빙성 있는 예측이 가능하였다. Ethanolamines being manufactured through a liquid phase reaction of ethylene oxide and 28% ammonia water, the effects of reaction temperature, feed mole ratio (defined as the ratio of ammonia to ethlene oxide), water concentration, and the amines in the feed on the distribution of each ethanolamine product (mono-, di-, and triethanolamine) were investigated with batch and continuous tubular reactor systems. Material balances indicate that the product distribution does not depend on the absolute values of rate constants but on the ratios among them. Temperature has negligible effect on the product distribution over the range of temperatures between 50℃ and 90℃. The feed ratio is a predominant factor to product distribution, such that as the ammonia ratio increases, the fraction of monoethanolamine increases and that of triethanolamine decreases, while that of diethanolamine increases slightly and then decreases. Water in the reaction mixture plays a role of catalyst and as water concentration increases, the formation of monoethanolamine is promoted. Mono-and diethanolamine may be added or recycled into feed in order to control the product distribution. However there are limitations in their amounts for a given feed mole ratio and the product distribution can be estimated reasonably well by using the ratios among the rate constants as obtained when the feed does not contain ethanolamines.