http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
- 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
- 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
RISS 인기검색어
- 검색키워드
- 저자 : 이전제 ( Kwang Mo Kim (검색결과 8 건)
- 무료
- 기관 내 무료
- 유료
-
-
-
-
-
이전제,김광모 대한건축학회 2004 대한건축학회 학술발표대회 논문집 - 계획계/구조계 Vol.24 No.1
The main purpose of this study is the development of potable CT systems which can be used to evaluate the structural safety of member in ancient wood buildings. Many researches about non-destructive evaluation(NDE) of wood have been performed. But most of these researches were focused on inspection of wood whether it had some deteriorated parts or not. In this study, CT systems were developed for quantitative detection of wood deterioration. And, the developed systems were composed of portable devices to apply for ancient wood buildings in field. Ultrasonic wave and X -ray CT methods were considered. And 5 circular shape specimens were tested for verification of developed methods. Over 23mm defects could be detected by ultrasonic CT method, but the size, shape and position did not agree with prototype. When same specimens were tested by X-ray CT method, the position and size of defects could be detected exactly.
-
이전제,김광모,한재수,김재건 한국목재공학회 2003 목재공학 Vol.31 No.5
본 연구에서는 몇 가지 새로운 집성재 단면구성 방법을 제안하고, 국산 낙엽송과 합판으로 제조된 집성재의 휨시험을 통해 단면 구성에 따른 집성재의 침성능을 평가 비교하였다. 수평적층(BH), 수직적층(BH), 수직으로 합판보강된 수직적층(BVV)과 수평으로 합판보강된 수직적층(BVH)의 총 네가지 형태의 단면구성 방법에 대하여 실험을 실시하였다. 파괴모드를 관찰하고, 실험을 통해 얻어진 하중-변형 곡선으로부터 MOR 및 MOE를 계산하여 이를 바탕으로 각 단면구성 방법의 휨성능 개선효과를 비교하였다. MOR의 경우에는 결함의 분산으로 인해 수직적층에서 수평적층에 비해 23% 정도의 개선효과를 얻을 수 있었으나, MOE의 경우에는 거의 유사한 값을 나타내었다. 수평으로 합판보강된 경우에는 상대적으로 휨성능이 약한 합판이 사용됨에 따라 MOE가 15% 정도 감소하였으나, 수직으로 합판보강된 경우에는 합판이 사용되었음에도 불구하고 MOE의 감소 없이 MOR이 개선되는 효과를 나타내었는데 이는 전단보강의 효과로 생각되며 이러한 효과를 파괴모드의 관찰을 통해서도 확인하였다. 이상의 결과로부터 집성보의 단면 구성시 라미나의 적절한 배치 및 전단보강 등을 통하여 전체적인 휨성능을 향상시킬 수 있음을 확인하였다. In this paper, bending capacities of glulams with different configurations of cross-section were evaluated. These configurations included horizontal(BH), vertical(BVN), vertical with vertical plywood(BVV) and vertical combination of lamination with horizontal plywood(BVH). Full-scale bending tests were performed to investigate the effect of different section configurations on bending strength(MOR) and stiffness(MOE) of glulam. Compared with type BH, MOR of glulam with type BVN configuration was improved about 23%, which was considered to be caused by defect dispersion effect, while MOE of glulams with these two types of configurations were similar. Because MOE of plywood is generally smaller than that of solid wood laminar, MOE of type BVH glulam decreased about 15%, but in the case of type BVV glulam, MOE was improved without any reduction of MOE. The reason of this result could be undersood in the view of shear-reinforcement effect, which was verified from analysis of fracture mode. From the results of this study, it was concluded that bending capacity of glulam could be improved by proper section design, such as laminar arrangement and shear reinforcement.
-
이전제,김광철,김광모,오정권 한국목재공학회 2003 목재공학 Vol.31 No.5
신뢰성 설계에서 재료강도의 분포 특성은 기본적인 입력 변수로 사용된다. 따라서 강도특성의 분포형태 및 그에 따른 인자들을 정확하게 결정하는 것은 신뢰성 설계를 위한 필수적인 작업이다. 지금까지 강도성능 평가는 주로 무결점 소시편에 대한 실험결과가 사용되어 왔다. 그러나 이러한 방법은 부채가 실재 사용되는 조건을 제대로 반영하지 못함에 따른 오차를 포함하게 된다. 본 연구에서는 구조재로 많이 사용되는 2×6부재(38 mm×140 mm, 길이 3.0 m) 498본에 대하여 육안검사를 통해 등급을 구분하고, 휨시험을 실시하였다. 신뢰성 설계로 전환을 위해 각 등급의 강도특성에 대한 분포형태 및 인자를 결정하였다. 분포형태의 결정을 위해 정규분포, 대수정규분포, 웨이블분포의 세가지 분포형태에 대한 square error를 비교하고, KS test를 통하여 결정된 분포형태의 적합성을 확인하였다. 모든 등급에서 휨강도(MOR)의 가장 적합한 분포형태는 웨이블분포로 나타났으며, 휨탄성계수의 경우는 정규분포가 가장 적합한 것으로 나타났다. In reliability based design(RBD) method, the distribution characteristics of mechanical properties of material are basic input variable. Therefore, distribution type and parameters of mechanical properties should be determined accurately. Until now, the properties were derived from tests with small, clear specimens. However, the test conditions should emulate as nearly as possible the way in which the timber would be used in practice and the test results should, as closely as possible, reflect the structural end use conditions to which the timber products would be subjected. In this study, structural timbers(38㎜ by 40㎜, 3.0m long) were graded by visual assessment of growth characteristics and defects. And then bending tests were conducted on 498 structural size timbers. For each grade, the distribution type and the parameters of mechanical properties were determined for each grade. For the determination of best-fit distribution type, comparing of square error between distribution types and KS test were conducted. Best-fit distribution type of bending strength(MOR) is weibull distribution for all grade. In case of MOE, normal distribution is best-fit.
-
경골목조주택의 벽체 - 바닥체 못결합부의 감쇠비에 관한 연구
이전제,김광모 한국목재공학회 1996 목재공학 Vol.24 No.3
In the design of wood structures, the consideration of the dynamic load effect has been increased. Generally, damping ratio is presented as the method of considering dynamic load effect. So, the relationship between joint type and damping ratio was investigated. It has been known that the joint extremely damp the dynamic load in wood structures. Static test was performed to determine the effects of nail size and friction area on joint strength and stiffness. Joint strength and stiffness were increased with nail size. However, the static properties of joint was not affected by friction area. Cyclic test was performed to determine the effects of nail size, friction area and load magnitude on damping ratio. Damping ratio was affected by all factors. Increasing the width of the bottom plate was suggested as the most adequate method to increse the damping ratio without the reduction of the static properties of the structures.
ScienceON
KISS연관 검색어 추천
이 검색어로 많이 본 자료
활용도 높은 자료
