http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
변압기내부 절연유의 전기적 등가회로 및 회복전압특성 해석
이세현(Sei Hyun Lee),한상옥(Sang Ok Han),박강식(Kang Sik Park) 대한전기학회 2007 대한전기학회 학술대회 논문집 Vol.2007 No.4
오일 변압기 내부의 절연물은 절연지, 프레스보드, 광유 또는 식물유가 주로 사용되고 있다. 사용 기간과 과부하 조건에 따라 열화정도가 달라질 수 있으며, 내부 절연물의 열분해 및 가수분해로 인해 수분은 자연스럽게 생성될 수 있다. 생성된 수분은 절연을 약하게 하는 주된 요인으로 작용해 기기의 고장 또는 정전을 초래할 수도 있다. 본 논문에서는 변압기 내부 절연물의 주파수응답 특성과 절연상태 값을 바탕으로 변압기 내부를 전기적 소자로 등가화하였다. 그 후 등가화된 회로를 이용해 회복전압법의 원리에 따라 EMTP 프로그램을 활용해 분극특성을 모의하였다. 실제 측정값과의 비교를 위해 보고된 문헌의 데이터를 활용하였고, RVM을 이용한 실측값과 유사한 결과를 얻게 되었다. 따라서 본 시뮬레이션에 활용된 전기적 소자값을 변경함으로서 내부 절연물의 열화정도에 대한 기대 파형을 예측할 수 있는 유용한 도구로 활용될 수 있음을 확인하였다.
이세현(Sei Hyun Lee),최태식(Tae Sik Choi),한상옥(Sang Ok Han) 대한전기학회 2007 대한전기학회 학술대회 논문집 Vol.2007 No.4
회복전압 측정법(RVM: Recovery voltage measurement)은 최근 유럽지역에서 활발히 연구 진행되고 있는 절연 진단 기법 중의 하나로 소개된바 있으며, 오일과 절연지 사이에 스며든 수분량을 검출할 수 있는 진단 시스템기법이다. 변압기 내부의 절연물질에 대한 분극특성을 분석함으로서 열화진행정도 및 열화정도를 진단하는데 활용될 수 있다. 본 논문은 국산화의 일환으로 전기계측제어용 LabVIEW 프로그램을 활용하여 RVM 전 과정을 자동으로 사용할 수 있도록 자체 제작한 프로그램을 소개하고자 한다.
정원등(lanterns)용 태양전지셀의 온도특성 변화연구
이세현(Se-Hyun Lee),박창용(Chang-Yong Park),조미령(Mee-Ryoung Cho),신상욱(Sang-Wuk Shin),황명근(Myung-Keun Hwang),양승용(Seong-Yong Yang) 대한전기학회 2006 대한전기학회 학술대회 논문집 Vol.2006 No.7
In this paper, I try to measure the electrical characteristics of PV cell for lanterns with solar simulator and simulated with PCID software. I keep my eye on the characteristics variation of PV cell as a temperature change. Therefore, I try to increase a temperature of controlled block from 10℃ to 50℃ while measuring the PV cell. As a result, A variation caused by voltage have an effect on the efficacy of PV cell. Hence, it is an important variable when a designer plan to make a solar cell for lanterns.
탄소계 도전성 재료를 이용한 전자파 흡수·차폐형 무기도료의 물리적 특성 및 효과
이세현(Lee Sea Hyun),심종우(Shim Jong Woo),박동철(Park Dong Cheol),정문영(Jung Moon Young) 대한건축학회 2003 大韓建築學會論文集 : 構造系 Vol.19 No.1
As the use of various electronic equipments has been increased recently according to industrialization and information network establishment, concern about electromagnetic wave exposed environment has also been increased. Therefore, this study aims to verify electromagnetic wave absorbing effects of inorganic paint that is made of carbon, electro-conductive materials with regard to its physical characteristics, its electromagnetic wave absorbing rate through a mock-up test for proving its effects in the indoor condition. The results are as follows: The results of running tests on electromagnetic wave absorbing inorganic paints for checking their requirements as painting material such as softness change, adherence degree, stability in low temperature, resistance to fine crack, resistance to washing, alkali-resistance, discoloration-resistance, etc. show that inorganic paints have the physical characteristics meeting the requirements for painting materials. In addition, it shows that the electromagnetic wave absorbing effect, in line with the number of paintings and the thickness of paintings, secures 75∼89% of efficiency. And the mock-up test shows that the electromagnetic wave absorbing effect inside building is directly proportional to the distance from the source of electromagnetic wave such as electronic equipments. Also, it shows that if inorganic paints are applied on the rear and side of the source of electromagnetic wave, the efficiency of electromagnetic wave absorbing effect amounts to 55% at the center of room, and increasing up to 85% according to the increase of the scope of spreading inorganic paints.