http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
파괴 및 비파괴진단 비교분석을 통한 케이블 열화특성평가
이동영(Dong-Young Yi) 한국조명·전기설비학회 2009 조명·전기설비학회논문지 Vol.23 No.6
본 논문에서는 지중전력케이블을 대상으로 케이블의 절연열화특성 분석시험을 통해 케이블의 절연열화와 절연진단결과 및 파괴강도와의 상관관계에 대한 실증연구를 수행하였다. 시험대상 선로의 제조결함 여부를 확인하기 위해 가교도분석, 핫오일테스트 등을 실시한 결과 제조결함은 없는 것으로 확인되었다. 진단대상 선로는 3상 모두 장기간 사용에 의해 열화가 많이 진전되었고, 특히 B상이 수트리 길이 및 화학구조결함 농도 면에서 가장 열화된 케이블인 것으로 판단되며, C상, A상의 순으로 열화정도가 다소 감소함을 확인하였다. 상기 결과는 진단시험 및 파괴강도시험 결과와 일치하며, 따라서 열화시정수법을 이용한 진단장치가 열화상태가 심각한 케이블의 선별에 효과적인 진단법임을 확인하였다. The insulation aging characteristics and structural analysis test were performed to analyze the correlations among the insulation deterioration, diagnostic results and the breakdown strength for the underground power cables. From the results of the degree of crosslinking test, hot-oil test etc., it could be confirmed that there were no manufacturing defects in the power cables under test. From the results of the water tree test and chemical structural analysis, it could be confirmed that the aging status of cable under test were very poor, especially for B-Phase and the degree of aging was increased in the orders of A, C and B-phase. From the above results, it could be concluded that the insulation aging characteristic analysis results were well consistent with the diagnostic and breakdown test results, and also confirmed that the diagnostic system under consideration was successful to discriminate the bad cables which is likely to cause cable system failure.
이동영(Dong-Young Yi) 한국조명·전기설비학회 2010 조명·전기설비학회논문지 Vol.24 No.1
본 연구에서는 고분자중합방법을 이용한 충진제 입도개선 및 구형화를 통해 충진제를 개질함으로써 에폭시복합체의 성능향상을 도모하였다. 개질된 충진제의 입도분포의 측정 결과 고분자비드의 PD(Polydispersity)값이 1.04로 개질전 충진제인 실리카 분말의 PD값 2.6에 비해 입자의 균일도가 상당히 개선된 결과를 가져왔으며 입도의 형태도 구형상을 유지하고 있음을 확인하였다. 실리카에 대한 실란전처리를 실시한 결과 모노머와 실리카의 상용성이 대폭 향상 되는 것을 확인하였으며 가교도 측정 결과 개질된 충진제가 3차원 망상구조를 지니고 있음을 확인할 수 있었다. 에폭시복합체의 성형시 충진제로 인한 유동성의 변화를 측정한 결과, 유동성이 향상됨을 확인하였다. 이상의 결과를 바탕으로 입도분포 개선 및 구형화를 통한 충진제 개질이 에폭시복합체 성능개선을 위한 매우 유용한 방법임을 확인하였다. In this study, the performance improvement of epoxy resin system had been tried by the improvement of particle size distribution and globularization of filler using polymerization method. From the results of particle size distribution measurement, the polydispersity value of reformed filler was 1.04 and that of silica flour before reformation was 2.6, it could be confirmed that the particle size uniformity of reformed filler had been improved greatly and the shape of particle was globular. Compatibility between monomer and silica was improved remarkably with the silanization pretreatment of silica flour. From the results of degree of crosslinking test, it could be confirmed that the binding structure of reformed filler was 3-dimensional net structure. And it could be also confirmed that the fluidness was improved at the casting of epoxy resin with reformed filler. From the above results, it could be concluded that the reformation of filler with the improvement of particle size distribution and globularization was very successful method to improve the performance of cast epoxy resin system.