http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이광순,정준영,신홍창,서정일,Lee, G.S.,Jeong, J.Y.,Shin, H.C.,Seo, J.I. 한국전자통신연구원 2019 전자통신동향분석 Vol.34 No.6
As a primitive immersive video technology, a three degrees of freedom (3DoF) $360^{\circ}$ video can currently render viewport images that are dependent on the rotational movements of the viewer. However, rendering a flat $360^{\circ}$ video, that is supporting head rotations only, may generate visual discomfort especially when objects close to the viewer are rendered. 3DoF+ enables head movements for a seated person adding horizontal, vertical, and depth translations. The 3DoF+ $360^{\circ}$ video is positioned between 3DoF and six degrees of freedom, which can realize the motion parallax with relatively simple virtual reality software in head-mounted displays. This article introduces the standardization trends for the 3DoF+ video in the MPEG-I visual group.
이광순,원왕연,In Seop Kim,Bongkook Lee,Seungjoo Lee,Seokyoung Lee 한국화학공학회 2008 Korean Journal of Chemical Engineering Vol.25 No.5
A model predictive control (MPC) system has been developed for application to the condensate recycle process of a 300 MW cogeneration power station of the East-West Power Plant, Gyeonggido, Korea. Unlike other industrial processes where MPC has been predominantly applied, the operation mode of the cogeneration power station changes continuously with weather and seasonal conditions. Such characteristic makes it difficult to find the process model for controller design through identification. To overcome the difficulty, process models for MPC design were derived for each operation mode from the material balance applied to the pipeline network around the concerned process. The MPC algorithm has been developed so that the controller tuning is easy with one tuning knob for each output and the constrained optimization is solved by an interior-point method. For verification of the MPC system before process implementation, a process simulator was also developed. Performance of the MPC was investigated first with a process simulator against various disturbance scenarios.
이광순,이응돈,정원식,허남호,Lee, G.S.,Lee, E.D.,Cheong, W.S.,Hur, N.H. 한국전자통신연구원 2016 전자통신동향분석 Vol.31 No.3
Light-field(LF) 기술은 자연스러운 완전 입체영상을 재현하면서도 홀로그램에 앞서 실현 가능한 기술로 알려져 있으며, 이에 대한 기술개발이 국내외에서 활발히 진행되고 있다. LF 기술은 카메라로 빛의 세기와 방향 정보를 획득 후 디스플레이로 그대로 재현함으로써 시각적으로 왜곡이 없는 완전 입체의 실감영상을 시청하게 하는 것이다. 조밀한 시점영상, 깊이영상의 제공으로 3D 단말 분야뿐만 아니라, 초점조절 기능을 통해 다양한 2D 응용 기술로 활용할 수 있다. LF 기술은 대형 디스플레이에서 완전 입체영상 제공을 목적으로 개발이 시작되었지만, 최근에는 모바일 단말, HMD와 같은 개인용 단말에 LF 기술을 적용하기 위한 기술개발이 시도되고 있다. 본고에서는 LF 카메라 및 단말 기술의 원리와 개발동향에 대해 살펴보고자 한다.
버스 승객의 안전한 하차를 위한 컴퓨터비전 기반의 차량 탐지 시스템 개발
이광순,이경복,노광현,한민홍,Lee Kwang-Soon,Lee Kyung-Bok,Rho Kwang-Hyun,Han Min-Hong 한국융합신호처리학회 2005 융합신호처리학회 논문지 (JISPS) Vol.6 No.1
본 논문은 컴퓨터 비전 기반의 인식 기법으로 주간 시내도로에 정차된 버스와 보도 사이로 접근하는 측후방 차량을 탐지하는 시스템을 설명한다. 이 시스템은 승객의 안전한 하차를 위해 버스 운전자와 승객에게 차량의 접근 유무를 알려준다. 버스의 측후방 영상은 버스가 정차할 때마다 버스 중앙 출입문 상단에 장착된 카메라에서 입력된다. 이 영상에서 버스와 보도 사이에 탐색영역을 설정하고 이 영역에서 영상의 변화와 소벨 필터링으로 차량을 탐지한다. 탐지된 차량의 중심점을 잡은 후, 위치 및 가로 세로의 크기를 이용하여 거리, 속도, 방향을 알아낸다. 이 정보를 이용하여 하차하는 승객에게 위험한 상황이라 판단될 경우, 운전자와 승객에게 위험을 알려준다. 실험결과로 시내 주행시 87% 이상의 탐지율을 나타내었다. This paper describes the system for detecting vehicles in the rear and rear-side that access between sidewalk and bus stopped to city road at day by computer vision-based method. This system informs appearance of vehicles to bus driver and passenger for the safety of a bus passenger getting off. The camera mounted on the top portion of the bus exit door gets the rear and rear-side image of the bus whenever a bus stops at the stop. The system sets search area between bus and sidewalk from this image and detects a vehicle by using change of image and sobel filtering in this area. From a central point of the vehicle detected, we can find out the distance, speed and direction by its location, width and length. It alarms the driver and passengers when it's judged that dangerous situation for the passenger getting off happens. This experiment results in a detection rate more than 87% in driving by bus on the road.
이광순,양규태,안충현,이수인,Lee, G.S.,Yang, K.T.,Ahn, C.H.,Lee, S.I. 한국전자통신연구원 2006 전자통신동향분석 Vol.21 No.4
지상파 DMB 서비스가 본격적으로 시작되면서 각 서비스 사업별로 다양한 데이터 서비스를 통한 수익모델을 강구하고 있다. 지상파 DMB는 여타의 다른 디지털 방송 시스템에서와 같이 비디오 연동형 혹은 독립형의 데이터 서비스가 가능하며, 이동통신망, 와이브로 등의 무선통신망과 연동하여 다양한 양방향 데이터 서비스를 제공할 수 있다. 본 논문에서는 자바 기반의 다운로드형 애플리케이션을 이용함으로써 플랫폼 독립적인 데이터 서비스를 제공하기 위해, 현재 국내 표준화 및 국제 표준화가 동시에 진행중인 지상파 DMB 미들웨어 기술에 대해 소개한다. 또한, 표준화중인 DMB 미들웨어가 제공할 수 있는 서비스의 특징과 이의 서비스 예를 간략히 소개한다.
이광순,김형남,허남호,엄기문,안충현,Lee, Gwang-Soon,Kim, Hyoung-Nam,Hur, Nam-Ho,Um, Gi-Mun,Ahn, Chung-Hyun 한국정보처리학회 2003 정보처리학회논문지B Vol.10 No.2
본 논문에서는 신호처리를 이용한 평행축 입체 카메라의 주시각 제어 방법을 제시한다. 평행축 입체 카메라는 양안식 입체 카메라 중 가장 간단하게 만들 수 있는 장점이 있는 반면에, 좌·우 영상 센서 사이의 거리가 일정하게 고정되어 있어, 물체의 거리 변화에 따른 입체 영상 시차 조절 기능인 주시각 제어 기능이 없다는 단점이 있다. 영상 센서(UD)와 렌즈를 분리하고 영상 센서가 평행하게 수평으로 움직이며 주시각을 제어하도록 하는 수평 이동축 입체 카메라는 평행축 입체 카메라의 단점을 보완할 수 있지만, 실제 구현에 많은 어려움이 있다. 본 논문에서는 주시각 제어를 위한 CCD의 이동은 실제 영상에서 피사체의 이동으로 나타난다는 사실을 이용하여, 평행축 입체 카메라로 얻은 영상에서, CCD의 이동으로 인해 사라지는 부분만큼을 제거하고 영상의 수평 수직 방향에서 원래 영상의 크기로 복원하기 위해 보간하는 신호처리의 과정을 통한 주시각 제어를 제안한다. 제안된 방법을 통해 얻어진 실험 결과는 CCD의 이동량에 따라서 화질의 열화 정도가 다르게 나타남을 보여 주지만, 실제 시스템에서 CCD의 이동량은 크지 않기 때문에 화질 열화를 거의 느끼지 않으면서 주시각이 제어된 입체 영상을 얻을 수 있음을 보여 준다. The vergence control method is presented for a parallel-axls stereo camera (PASC) using a signal processing technique such as shift, (rotation), and scaling. The PASC is considered as the simplest one of binocular stereo cameras. However, its major limitation lies in the controllability of vergence since its left and right imaging sensors of CCDs are fixed. On the other hand, a horizontal-moving-axis stereo camera (HMASC) with movable imaging sensors is able to control the vergence by moving its CCDs horizontally. In spite of its vergence controllability, there is a major drawback in the implementation because of complicated mechanical structure and the additional cost. To overcome the vergence control problem of the PASC, an operational principle of the HMASC is applied to the PASC. To be specific, without any additional hardware the vergence control problem of the PASC is solved with the signal processing technique. Assuming the virtual displacement between CCD's, a disappearing part of acquired images is removed and the original image site is recovered via interpolation. Experimental results show that the vergence control between stereo images captured by the PASC it possible with an acceptable degradation of the image quality defending on the virtual displacement of CCDs.