http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
윤용호(Yongho Yoon),김진영(Jinyung Kim),이광근(Kwangkeun Yi) 한국정보과학회 2012 한국정보과학회 학술발표논문집 Vol.39 No.1A
이 논문은 안드로이드 어플리케이션의 불필요한 코드를 찾는 방법을 제안한다. 불필요한 코드란 어플리케이션이 실행되는 도중에 한 번도 호출되지 않는 메소드로 한정한다. 불필요한 코드를 찾으면 어플리케이션의 크기를 줄일 수 있고, 개발자는 디버깅에도 이용할 수 있다. 안드로이드 어플리케이션의 불필요한 코드를 찾을 때는 자바의 특성과 안드로이드의 특성을 잘 고려해야 한다. 우리의 방법은 이 특성들을 잘 고려하여 불필요한 코드를 안전하게 찾도록 설계하였으며, 제안한 방법을 구현하여 실제 안드로이드 공식마켓의 인기 무료 앱을 수집해 시험하였다.
윤용호 ( Yongho Yoon ),정지훈 ( Jihoon Jung ) 한국화학공학회 2016 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.54 No.5
V-Cr-Y 합금은 높은 투과도와 선택도를 가진 수소 분리막 재료이다. V-Cr-Y 분리막의 투과속도를 증가시키기 위하여 sputtering을 이용한 V-Cr-Y 박막을 제조하고 그 특성을 연구하였다. V-Cr-Y 성분이 각각 89.8%, 10.0%, 0.2%인 타겟을 이용하여 실리콘웨이퍼 위에 박막을 증착시켰으며, EDS 분석을 통해 박막조성이 타겟조성과 일치함을 확인하였다. 스퍼터링 온도와 출력이 증가할수록 박막의 성장속도와 결정크기가 증가하였으며, 압력이 감소할수록 결정구조가 보다 미세하고 치밀해졌다. 최적 스퍼터링 조건은 교류 고주파(RF), 2mTorr, 300W, 상온이었으며, 이 조건으로 제조한 박막을 열처리 하여 수소분리에 적합한 박막을 얻을 수 있었다. V-Cr-Y alloy is a material for hydrogen separation membrane possessing high transmittance and selectivity. In order to increase the rate of hydrogen permeation flux through the membrane, V-Cr-Y thin film was prepared using a sputtering technique and was investigated focusing on its basic properties. Thin film was deposited on a silicon wafer using a target including V (89.8%), Cr (10.0%) and Y(0.2%), and results of EDS analysis confirm that the ratio of metal in thin film agrees with that in the target. Higher sputtering temperature and power resulted in more rapid growth rate of the thin film and larger size of the crystals, and denser and finer crystal structure was observed when lower pressure was applied. An optimal sputtering condition was found with RF, 2mTorr, 300W and ambient temperature, and a suitable V-Cr-Y thin film for hydrogen separation was obtained upon heat treatment of the thin film prepared in this way.
의미 기반 정적 분석과 규칙 명세 언어를 활용한 C/C++ 프로그램 보안 취약점 검출
윤용호(Yongho Yoon),진민식(Minsik Jin),정영범(Yungbum Jung),이규호(Gyuho Lee),김희동(Heedong Kim),김진국(Jingoog Kim) 한국정보과학회 2019 정보과학회 컴퓨팅의 실제 논문지 Vol.25 No.10
보안 취약점을 정적 분석으로 검출하는 것에는 여러 장점이 있지만 일반적으로 새로운 취약점 검출을 지원하기 위한 비용이 크다는 어려움이 있다. 검출 범위를 손쉽게 확장하기 위해 보안 취약점을 표현할 수 있는 방법을 정의하고 그 표현에 부합하는 프로그램을 검출하는 기술이 존재하지만 대개 프로그램의 모양에만 의존하거나 간단한 값 흐름 분석에만 적용할 수 있었다. 이런 점을 보완하기 위하여 보안 약점을 표현할 수 있는 규칙 명세 언어를 정의하고 이를 기반으로 취약점을 검출하는 요약 해석 기반 정적 분석 도구를 고안 및 구현하였다. 분석 대상 언어는 C/C++이며, 상용 정적 분석 도구에 포함된 C/C++ 분석 엔진을 기반으로 규칙 명세 언어 매칭 검사기를 구현했다. 대상 취약점은 CWE(Common Weakness Enumeration) 목록 중 적합한 17가지를 선별했다. 정오탐률 계산을 위해 자동생성한 테스트 셋을 대상으로 성능을 시험한 결과 정탐률은 61.4%, 오탐률은 7.5%로 집계되었다. In spite of a number of advantages to detecting security holes using static semantic analysis, new types of vulnerabilities are not easily detected by the existing static analyzers. Some technologies have defined mechanisms to identify security vulnerabilities and match them with the programs but they are based only on simple syntactic analysis or data-flow analysis. We defined rule description language (RDL) to describe vulnerability rules and made a static analyzer based on abstract interpretation that detects the denoted defects in C/C++ programs. Implementation of the RDL matching engine was based on an existing commercial C/C++ static analysis tool. We selected 17 rules from the CWE (Common Weakness Enumeration) list that fit with RDL and static analysis. We evaluated the correctness of our tool with automatically generated test cases and the result showed 61.4% true positive and 7.5% false negative rates.
스위치드 릴럭턴스 전동기(SRM) 구동용 Converter Topology 연구
윤용호,Yoon, Yongho 한국인터넷방송통신학회 2021 한국인터넷방송통신학회 논문지 Vol.21 No.3
스위치드 릴럭턴스 전동기 (Switched Reluctance Motor, SRM)는 전류의 크기와 회전자와 고정자의 상대적 위치에 따라 인덕턴스가 매우 비선형적으로 변하는 특성이 있고, 토크는 이 인덕턴스의 기울기에 비례하여 발생하기 때문에 비선형 토크 특성을 가지며 토크 맥동이 크고 소음이 심한 단점도 있다. 이러한 문제점들을 고려하고 경제성과 회로의 간단화를 위하여 기존의 비대칭 컨버터 (Asymmetric Bridge Converter)에서 효율과 성능을 개선할 수 있는 구동용 토폴로지(Topology)에 대한 연구들이 많이 진행되었다. 따라서 본 논문에서는 SRM 구동용 토폴로지로 적용하여 사용되고 있는 각 컨버터들을 비교, 분석함으로써 성능을 확인하고자 한다. 비교, 분석에 적용된 구동용 컨버터는 가장 널리 사용되고 있는 비대칭 브리지 컨버터 (Asymmetric Bridge Converter)와 C-dump 컨버터 형태의 구조를 가진 Conventional C-dump, Modified C-dump, Energy efficient C-dump, 공진형 C-dump 컨버터, 그리고 일반 전동기의 범용으로 사용되고 있는 6-Switch 인버터이다. Switched Reluctance Motor (SRM) has a characteristic that the inductance changes very nonlinearly depending on the magnitude of the current and the relative position of the rotor and stator, and the torque is generated In consideration of these problems, many studies have been conducted on a topology for driving that can improve efficiency and performance in an existing asymmetric bridge converter in order to simplify the circuit and economic efficiency. Therefore, in this paper, we want to check the performance by comparing and analyzing each converter used by applying it as a topology for SRM driving. The driving converters applied to the comparison and analysis are Conventional C-dump, Modified C-dump, Energy efficient C-dump, Resonant C-dump converter with C-dump converter type structure and the most widely used asymmetric bridge converter and 6-Switch inverter that used for general motors.