http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
오충석(Choong-Seok Oh),선병찬(Byung-Chan Sun),박용규(Yong-Kyu Park),노웅래(Woong-Rae Roh) 한국항공우주학회 2009 韓國航空宇宙學會誌 Vol.37 No.7
본 논문에서는 시간영역에서 최소자승법을 이용하여 실린더 용기의 슬로시 주파수와 댐핑 계수와 함께 슬로시 모드 질량 및 슬로시 힘 작용점 높이를 시험을 통해 추정하였다. 추정한 결과가 해석 결과와 비교적 잘 일치함을 확인 할 수 있었으며 추정기법의 정확성을 파악할 수 있었다. 향후 이 기법을 이용해 액체 연료 용기의 슬로시 모델 파라미터를 추정하는데 적용할 예정이다. The slosh natural frequencies, damping ratio, slosh mass and slosh force applying point of the liquid in cylindrical tank are estimated using the nonlinear least squares method in time domain. The estimated slosh model parameters are in good agreement with the results of the theoretical calculations for various liquid depths. Furthermore, this methodology will be applied to predict the sloshing parameters for a liquid propellant tank using ground experimental test-bed.
몬테카를로 시뮬레이션을 이용한 발사체 단 분리 운동 분석
오충석(Choong-Seok Oh),선병찬(Byung-Chan Sun),박용규(Yong-Kyu Park),노웅래(Woong-Rae Roh) 한국항공우주학회 2015 韓國航空宇宙學會誌 Vol.43 No.4
본 논문에서는 일반적인 발사체의 형상에 대하여 몬테카를로 시뮬레이션을 적용하여 단 분리 유격 분석을 수행하였다. 단 분리는 매우 짧은 시간동안 이루어지며, 매우 많은 운동 변수가 관계되고 충돌 발생시 발사 실패가 나타나는 매우 중요한 비행 이벤트이다. 다양한 오차요인이 무작위(random)로 발생하는 경우에도 설정된 유격조건 내에서 분리가 됨을 확인하기 위해 일반적인 발사체 형상에 대한 단 분리 분석을 수행하였다. 몬테카를로 분석 기법을 발사체 단 분리 분석에 적용함으로서 단 분리 운동시 확률적인 결과들을 제시하였다. This paper addresses Monte-Carlo simulation analyses for the stage separation of the general launch vehicle. The stage separation event of the launch vehicle occurs during a very short time and is related with many dynamic parameters. The stage separation is a critical event in that the launch fails if there is a collision during the stage separation. The stage separation analyses was conducted for the general launch vehicle to confirm the separation without collision within the designed clearance in case of the random input parameters. This paper presents the stochastic results of the stage separation of the launch vehicle using the Monte-Carlo simulation.
롤 보상알고리듬을 적용한 발사체 자세제어기 구조 설계 및 분석
박용규(Yong-Kyu Park),오충석(Choong-Seok Oh),선병찬(Byung-Chan Sun),노웅래(Woong-Rae Roh) 한국항공우주연구원 2011 항공우주기술 Vol.10 No.1
본 논문에서는 롤 자세운동이 발생하는 상황에서 안정적인 피치/요 자세제어를 위한 항법쿼터니언 기반 자세제어기 구조를 설계하고, 발사체 6자유도 시뮬레이션을 통해 설계된 제어기의 성능평가를 수행하였다. 항법쿼터니언 자세제어기는 기존 KSR-III, KSLV-I 상단부 자세제어기 설계 경험을 기반으로 고안되었고, 탑재소프트웨어 내에서 효율적인 자세제어 변수 사용 및 KSR-III, KSLV-I 상단부 제어기와 동일한 성능 확보 관점에서 설계되었다. 제안된 새로운 자세제어기 타당성 분석을 위하여 방위각 전환을 위한 롤 기동, 롤 자세제어가 수행되지 않는 두 비행조건에 대해 6자유도 시뮬레이션을 수행, 자세제어 성능을 평가하고 탑재 소프트웨어로서 적용 가능성을 확인하였다. This paper is summarized for designing launch vehicle autopilot structure with attitude angle command from guidance algorithm and for evaluating performance of autopilot using launch vehicle six-degree of freedom simulation program. The suggested autopilot has heritage from KSR-III/KSLV-I upper stage autopilot designing experience, and it has two design point. The one is, it must have same performance with KSR-III/KSLV-I upper stage autopilot, the other is, it must be simple autopilot structure and use low number of variable to apply on-board system. It is evaluated the performance using launch vehicle six-degree of freedom simulation program in case of roll maneuvering and no roll control flight condition.