http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
초음파피로시험법을 이용한 티타튬 합금의 브레이징 접합강도 평가
안종기(Jongkee Ahn),이동엽(Dongyeop Lee),김태형(Taehyung Kim),신동익(Dongick Shin),조인식(Insik Cho),김동훈(Donghoon Kim) 한국추진공학회 2015 한국추진공학회 학술대회논문집 Vol.2015 No.5
쉬라우드 임펠러(Shroud impeller) 제작시, 커버와 블레이드 접합을 위해 브레이징(Brazing) 공법을 활용중으로 브레이징공법은 450°C 이상에서 접합하고자 하는 모재(Base Metal)의 용융점(Melting Point) 이하에서 모재는 상하지 않고 용가재(Filler Metal)를 사용하여 열을 가하여 두 모재를 접합하는 기술을 의미한다. 일펠러로 사용되는 고온구조재료 티타늄합금에 대해 용가재는 TiCuNi 합금을 사용하였으며, 초고주기 환경에서의 피로강도를 검증하기 위해 최근 유럽과 일본을 중심으로 활발하게 연구되어지고 있는 20KHz 초음파 피로시험법을 활용하여 브레이징과 모재와의 접합피로강도 평가를 새롭게 적용하고자 하였다. 따라서 브레이징 접합 초음파피로강도시험을 위해서는 우선적으로 수십㎛의 접합층이 시험편 정중앙에 위치할 수 있도록 설계하여야 한다. 이는 초음파피로시험편은 Hourglass타입으로 최대응력진폭이 시편 정중앙에 집중되기 때문이며, 이에 맞추어 동탄성계수측정을 통한 공진시험편 설계와 정밀 가공이 이루어져야 한다. 따라서 본 논문에서는 모재부와 브레이징 접합 피로강도를 비교 평가 하고자 하였으며, 그에 따른 브레이징 공법의 신뢰성 분석 및 피로파괴 거동을 분석하고자 하였다. Shroud impeller during production, cover and into the brazing process utilizing the brazing process for bonding blade below 450℃ melting point of base metal to be joined at the base to bond two or more base by applying heat using a filler metal. Filler metal for high temperature structural materials of titanium alloy is used as a filler made of TiCuNi alloy. In order to verify the fatigue strength of the ultra-high frequency environment recently been actively studied mainly in Europe and Japan, by utilizing 20kHz ultrasonic fatigue test was to apply a new law being fatigue strength of the brazed joint and the base metal. Thus, for the brazing joint strength of the ultrasonic fatigue test should be designed to position the specimen in the center of the bonding layer. This is because the maximum stress amplitude in ultrasonic fatigue testing is in the center of the hourglass type specimen, where the dynamic elastic modulus is determined according to the resonant design and precision-machined specimens. Therefore, in this paper, the fatigue strength of base metal brazed joint was evaluated and compared. There liability analysis and fatigue fracture behavior of the brazing were analyzed accordingly.