http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
MaxEnt 모형을 활용한 백두대간에 자생하는 주요 밀원수종인 음나무, 피나무, 쪽동백나무의 서식지 적합성 평가
심형석,이민기,이창배,Sim, Hyung Seok,Lee, Min-Ki,Lee, Chang-Bae 한국산림과학회 2022 한국산림과학회지 Vol.111 No.1
In this study, habitat suitability was analyzed for three major honey tree species, namely Kalopanax septemlobus, Tilia amurensis, and Styrax obassis, in the Baekdudaegan Mountains using MaxEnt models. The AUC values indicating the prediction accuracies of the models were 0.747, 0.790, and 0.755 for K. septemlobus, T. amurensis, and S. obassis, respectively. The most important variables for K. septemlobus and T. amurensis were elevation, mean annual temperature, and slope, whereas mean annual temperature, elevation, and mean annual precipitation were the most important predictors for S. obassis. For all three studied species, elevation and mean annual temperature were the most important topographic and climatic factors, respectively, indicating that such variables are crucial for explaining species distribution. Honey tree species are essential resources in forest beekeeping, a high value-added process for improving forest income, and this study identified sites with the potential for management of such species in the Baekdudaegan Mountains, where it may be possible to establish a honey forest. However, the accuracy of the models should be improved through comprehensive analysis with abiotic variables, such as soil properties and aridity, which affect the distribution of honey tree species, as well as biotic variables, such as interspecific competition. 본 연구는 백두대간에 자생하는 주요 밀원수종 3종(음나무, 피나무, 쪽동백나무)을 대상으로 서식지 적합성 분석을 수행하였다. 백두대간 내 밀원수종 서식지 적합도 분석을 MaxEnt를 이용하여 수행한 결과, 모형의 예측정확도 AUC값은 음나무 0.747, 피나무 0.790, 쪽동백나무 0.755로 나타났다. 밀원수종의 서식지 적합도에 가장 영향을 많이 미치는 변수로 음나무와 피나무는 고도, 연평균 기온, 경사도 순으로 나타났으며, 쪽동백나무는 연평균 기온, 고도, 연평균 강수량 순으로 나타났다. 본 연구에서 분석된 대상수종 모두 지형인자인 고도와 기후인자인 연평균 기온이 가장 중요한 인자로 나타났으며, 이는 고도와 기온이 대상 수종의 분포 패턴을 설명하는데 매우 핵심적인 인자임을 나타낸다. 본 연구는 임업소득 향상을 위한 고부가가치 아이템인 산림양봉의 필수자원인 주요 밀원수종들의 서식지 적합성 분석을 통해, 백두대간 내 주요 밀원수종의 관리와 밀원림을 조성할 수 있는 잠재력이 높은 중요 적합지들에 대한 자료를 제공한다. 향후 밀원수종 분포에 영향을 미치는 토양, 건조도 등의 무생물적 인자와 종간경쟁 등의 생물적 인자를 종합적으로 고려하여 모형의 정확도를 높이는 연구가 추가로 진행되어야 할 필요가 있다.
심형석(Hyung-Seok Sim),최규성(Kyu-Sung Choi),고정환(Jeong-Hwan Ko),노웅래(Woong-Rae Roh) 한국항공우주연구원 2012 항공우주기술 Vol.11 No.2
우주발사체 비행에 의한 발사장 주변의 음향 소음에 대하여 분석하였다. 발사체 엔진배기 제트에 소음원을 위치시키고 소음의 방향성, 대기 감쇄 등을 고려하여 발사장 주변의 특정 지점에 미치는 소음의 크기를 예측하였다. KSLV-I의 발사 소음을 예측하고 이 결과를 비행시험시의 측정 결과와 비교하였다. 분석 결과는 소음의 방향성에 의해 큰 영향을 받는 것으로 나타났으며 소음 방향성 정보에 대한 적절한 가정에 의해 시험 결과와 예측결과가 서로 잘 일치하는 것을 확인하였다. The acoustic noise around a launch pad by launches of space launch vehicles was analyzed. The magnitudes of sound noise at some points near launch pad were predicted by locating the sound source at the exhaust jet plume of the rocket engine and considering several factors such as the directivity of the sound propagation and atmospheric attenuation. Specifically, the launch noise of Korea Space Launch Vehicle-I (KSLV-I) was estimated, and was compared to the actual measurement results. The analysis results proved to be heavily affected by the characteristics of directivity of sound propagation and the analysis showed good agreements with the measurements when the directivity of the sound was appropriately adjusted.
심형석(Hyung-Seok Sim),최규성(Kyu-Sung Choi),고정환(Jeong-Hwan Ko),정의승(Eui-Seung Chung) 한국항공우주학회 2015 韓國航空宇宙學會誌 Vol.43 No.2
궤도 속도에 근접하거나 궤도운동을 하고 있는 발사체 상단의 지구 재진입에 따른 지상 피해 분석에 이용하기 위하여 지구 재진입 물체의 생존성 분석 프로그램(SAPAR: Survivability Analysis Program for Atmospheric Reentry)을 개발하였다. 3자유도 파편 낙하 시뮬레이션 과정에 파편이 낙하하는 도중에 받게 되는 공력 열하중, 열하중에 의한 파편의 온도변화, 녹는점에 도달한 후 물체의 상변화 여부 등을 포함하여 최종적으로 지상에 낙하하는 파편의 크기와 무게를 분석하였다. 개발된 코드의 검증을 위하여 단순한 형태의 파편에 대한 생존성 분석을 수행하여 분석을 수행하여 미항공우주국(NASA)과 유럽우주국(ESA)의 코드 결과와 비교하였다. 또한 실제 재진입 파편에 대한 분석을 수행하여 측정된 결과와 비교하였다. A survivability-analysis program has been developed to analyze the ground collision risk of atmospheric reentry objects, such the upper stages of a launch vehicle or satellites, which move at or near the orbital velocity. The aero-thermodynamic load during the free fall, the temperature variation due to thermal load, and the phase shift after reaching the melting point are integrated into the 3 degree-of-freedom trajectory simulation of the reentry objects to analyze the size and weight of its debris impacting the ground. The analysis results of the present method for simple-shaped objects are compared with the data predicted by similar codes developed by NASA and ESA. Also, the analysis for actual reentry orbital objects has been performed, of which results are compared with the measurement dat.