http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
송민우(Minwoo Song),김대현(Daehyeon Kim),최찬용(Chanyong Choi) 한국철도학회 2016 한국철도학회 학술발표대회논문집 Vol.2016 No.5
철도 및 도로의 다짐관리를 위하여 흙의 함수비 및 건조밀도는 중요한 요소로 작용하며, TDR(Time Domain Reflectometry) 시스템을 이용한 현대식 다짐관리 방법이 이용되고 있다. 하지만 TDR 시스템에서도 발생할 수 있는 문제가 있으며, 이를 최소화 하기 위하여 본 연구는 진행되었고, 본 연구를 통하여 판형 Probe를 개발하였으며 개발한 시스템의 검증을 위하여 실측 값과 TDR 시스템을 이용한 측정 값을 비교하였고, 그 결과 기존의 TDR 시스템과 개발한 TDR 시스템의 정밀도를 비교한 결과 비슷한 수준의 정밀도를 얻을 수 있었다. Soil water content and dry density are important factor to manage compaction of the railroad and road. The modern compaction control is used for measuring water content and dry density by using the TDR(Time domain Reflectometry). However, some problems are able to occur when TDR system is used. This study was conducted to minimize problems. In this study, flat-type probe is developed. Also, to verify the developed TDR system, TDR tests were examined by comparison of the measured values by TDR and the real value. Based on the test results, it has been confirmed that accuracy of the developed TDR system is similar with previous TDR system.
송민우(Minwoo Song),김대현(Daehyeon Kim),최찬용(Chanyong Choi) 한국지반신소재학회 2015 한국지반신소재학회 논문집 Vol.14 No.1
TDR을 이용한 흙의 건조밀도와 함수비의 새로운 보정 방정식을 검증하기 위해 본 연구를 수행하였다. 기존의 보정 방정식이 제안되고 몇몇 연구자들에 의해 새로운 보정 방정식을 개발하는 연구가 진행되고 있다. 기존의 보정 방정식이 함수비가 높은 세립토와 느슨한 토질에서는 적용되기 어려워 새로운 보정 방정식을 개발하였다. 이에 따라 본 연구에서는 새로운 보정 방정식을 소개하고 기존의 실험과 비교해 새로운 보정방정식의 국내지반과의 적용성을 검토를 수행하였다. 그 결과 함수비의 보정방정식에 오차가 발생하여 함수비의 새로운 보정방정식을 개발하였고, 개발한 보정방정식을 검토한 결과 95%이상의 정확도를 보여준다. The objective of the study is to verify a new calibration equation of dry density and water contents with TDR. Since the traditional calibration equation was proposed, some research to develop a new calibration equation has been conducted by several researchers. As traditional calibration equation is difficult to be applied for loose soil and fine-grained soil at high water contents, this study developed a new calibration equation. Thus, this study introduces a new calibration equation and its applicability by comparing TDR test results with conventional test results. Based on the analyses, the calibration equation for water content has large error. A new calibration equation was proposed and it showed more than 95% accuracy for estimating water content of soil.
송민우(Minwoo Song),김완민(Wanmin Kim),김대현(Daehyeon Kim),최찬용(Chanyong Choi) 한국지반신소재학회 2016 한국지반신소재학회 논문집 Vol.15 No.3
본 연구는 기존의 다짐관리 방법에서 다짐이 완료된 지반의 일부를 손상시켜야 하는 단점을 해결하기 위하여 진행되었다. 본 연구를 통하여 판형 Probe를 제작하였고, 제작한 Probe에 탄성파 측정 장치인 Piezoelectric stack을 결합하였다. 개발한 TDR 시스템을 이용하여 시간에 따른 개량토의 강도 변화를 측정하였다. 실험 결과, 압축탄성계수 및 전단탄성계수는 각각 78.92MPa에서 587.09MPa, 31.53MPa에서 182.44MPa로 증가함을 확인할 수 있었다. 실험 결과를 통하여 개발한 TDR 시스템을 이용하여 현장에서 개량지반의 시간경과에 따라 지반개량효과 및 다짐관리에 유용하게 활용할 것으로 기대된다. This study was conducted to solve the problem such as damage of completed compaction ground using the conventional compaction control method. In this study, a TDR system equipped with a flat type probe has been developed. Also, the Piezoelectric stack, which is an instrument for measuring the elastic wave on the ground, has been added to the developed flat type probe. In this study, the strength variation of reinforced soil with time was determined by using the TDR system. The value of compression and shear modulus increased from 198.65MPa to 541.80MPa and from 125.55MPa to 302.02MPa with time, respectively. Based on the test results, it has been confirmed that the developed TDR system can be used as reinforced effect analysis of soil and compaction control.
강영웅(Youngwoong Kang),송민우(Minwoo Song),윤철상(Chul Sang Youn),오정택(Jungtaek Oh) 대한기계학회 2021 대한기계학회 춘추학술대회 Vol.2021 No.4
PTFE(Polytetrafluoroethylene)가 코팅된 유리섬유 원단은 치수 안전성, 내열성, 내화학성 및 절연성이 우수하여 산업재료로서 건축용 막재, 고온용 컨베이어 벨트, 특수테이프 등 다양한 산업 분야에 적용되고 있다. 특히 유리섬유 원단은 제작비용의 효율성과 용이한 대량 생산의 이점으로 자동차, 건축 자재 등에 광범위하게 사용되고 있다. 본 연구에서는 일축인장 시험과 이축인장 시험에 따른 기계적 거동 비교를 통해 코팅된 유리섬유 원단의 역학적 특성을 분석하였다. 일축인장 시험은 원단의 구조적 특성을 고려하여 시료의 0/45/90˚ 방향에 따라 진행하였으며, 이축인장 시험은 0/45˚ 방향에 따라 진행하였다. 일축인장 시험의 경우, 표준 KS K 0521에 준하여 폭 50mm, 표점거리 200mm 로 하여 20mm/min의 속도로 인장하였으며, 이축인장 시험은 폭 60mm의 십자시험편을 사용하여 일축인장 시험과 동일한 조건으로 진행하였다. 인장시험을 통해 얻어진 유리섬유 원단의 역학적 특성 분석 결과를 바탕으로, 유리섬유 원단으로 구성된 제품의 성능 예측 시뮬레이션에 적용 가능한 재료 모델을 검증하였다. 재료 모델 검증에는 범용 구조해석 소프트웨어인 Abaqus를 사용하였고, 일축인장 시험에 사용된 시험 편 및 시험조건을 모사하여 진행한 시뮬레이션 결과와 각 방향의 일축인장 시험 결과를 비교하여 재료 모델을 검증하였다. 향 후 이축인장 시험을 모사하여 재료모델에 대한 추가적인 검증을 수행할 예정이며, 본 연구를 통해 검증된 재료모델은 PEFE 코팅된 유리섬유 제품의 성능예측에 효과적으로 활용될 수 있을 것으로 기대된다.