RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • KCI등재
      • KCI등재

        흙막이 벽체 배면 그라우팅 시 지반보강 효과에 관한 연구

        주익찬(Chu, Ickchan),변요셉(Byun, Yoseph),백승인(Baek, Seungin),천병식(Chun, Byungsik) 한국지반환경공학회 2012 한국지반환경공학회논문집 Vol.13 No.10

        최근 도심지에서의 대심도, 대규모 굴착공사는 인접구조물의 침하 및 다양한 제약사항으로 인해 흙막이 벽체를 이용한 굴착공사가 일반화되어 있다. 이러한 지반의 굴착은 평형상태를 이루고 있는 굴착 주변지반의 응력상태를 이완시켜 굴착면 주변 지반 침하 및 흙막이 벽체의 변형을 유발시킨다. 이에 본 연구에서는 지반보강의 목적으로 무기질계 고성능 지반안정재인 NDS공법을 적용할 경우에 흙막이 벽체 배면에 적용하여 지반의 보강 효과를 규명하였다. 최적 주입압 및 주입량을 산정하기 위하여 주입시험을 수행하였다. 산정된 주입량과 주입압으로 대형토조모형시험을 실시하였으며 무보강/보강에 의한 영향 검토, 보강 시 상재하중(50kPa/150kPa)에 의한 벽체 거동도 검토하였다. 흙막이 벽체 배면 그라우팅 시 지반보강 효과를 모형토조실험을 통하여 규명하였다. 주입시험 결과, 적정 주입압은 350kPa, 경제성을 고려한 각 노즐의 한 단계당 적정 주입량은 10L로 판단된다. 모형토조 시험 결과, 최대변위는 흙막이 벽체 배면에 그라우팅을 실시한 경우 무보강일 때의 변위보다 약 81% 감소한 것으로 나타났다. 보강된 배면에 상재압 50kPa와 150kPa를 작용한 상태에서 단계별 굴착에 따른 흙막이 벽의 거동을 파악한 결과, 벽체 변위는 보강만 한 경우에 비해 각각 약 58%와 57% 증가한 것으로 나타났다. Recently, excavations using propped walls were popularized in downtown due to reduced settlement of nearby structures. These excavations is induced strain to propped walls or settlement in near ground. In this study, the ground reinforcing effect was proven using NDS, which is an inorganic injection material. Injection tests were performed to compute optimum injection pressure and volume. Next, calibration chamber tests were performed by using computed injection pressure and volume, and wall behaviour was examined for overburden pressures of 50kPa and 150kPa. Ground reinforcing effect was shown when the material behind the propped wall was grouted. From test results, optimum injection pressure was 350kPa and the optimum volume was 10L considering economics. Calibration chamber test results show that after the material was grouted, the maximum settlement was reduced to 19% of the non-grouted condition. For overburden pressures of 50kPa and 150kPa behind the wall, the settlement of the wall increased by 58% and 57% when compared to the case of no overburden pressure.

      • KCI등재

        터널 배수공의 재질에 따른 스케일 부착 특성에 관한 연구

        주익찬(Chu, Ickchan),남승혁(Nam, Seunghyuk),백승인(Baek, Seungin),정혁상(Jung, Hyuksang),천병식(Chun, Byungsik) 한국지반환경공학회 2011 한국지반환경공학회논문집 Vol.12 No.11

        지하수에 의하여 터널 내로 유입된 수산화칼슘(Ca(OH)<Sub>2</Sub>)이 이산화탄소(CO<Sub>2</Sub>)와 차량의 배기가스(SO<Sub>3</Sub>) 등과 반응하여 그 반응물이 터널의 배수공 내에 침전되어 배수공 클로깅 현상이 발생하였다. 대부분의 반응물은 화학분석 결과 칼사이트의 탄산칼슘 (CaCO<Sub>3</Sub>)인 것으로 나타났다. 본 연구에서는 일반적으로 터널의 배수공으로 사용되는 PVC관과 새로운 재질의 배수공인 테프론 코팅강관, 실리콘오일 코팅관, 아크릴관에 CaO 수용액과 터널 배수공 유출수를 흘려보내어 스케일 부착형태를 분석함으로써 배수공 의 재질이 스케일 부착에 미치는 영향을 연구하였다. 그 결과 PVC관에서 가장 많은 양의 스케일이 생성되었고 아크릴관, 실리콘오일 코팅관, 테프론 코팅강관의 순으로 관 표면에 스케일이 적게 부착되었다. 그러나 장기적 시험결과 테프론 코팅강관의 경우 관 표면이 터널 유출수에 포함되어 있는 토사로 인하여 손상되어 코팅재의 탈락, 강관의 부식 등이 발생하여 내구성에 문제가 있었다. The calcium hydroxide(Ca(OH)2) which is flowed into the deteriorated tunnel by groundwater is reacted with carbon dioxide(CO2) and the vehicle"s exhaust gas (SO3). So its by-products are precipitated at the drainage pipe and these cause the drainage clogging. Most by-products are composed of CaCO3 with calcite from a chemical experiment. The purpose of this study is mainly focused on comparison of attachment on each material of drainage pipe (teflon-coated steel pipe, silicon-Oil coated pipe, acrylic pipe and PVC pipe). The test was progressed to disembogue the CaO aqueous solution and tunnel outflow into each of the pipes. The experimental results show that the most produced scale pipe is PVC material and the followings are Acrylic pipe, Silicon-Oil coating pipe and Teflon coating pipe. But the long-term test results showed that teflon-coated steel pipe had a problem with durability because soil which was contained in the tunnel outflow occurred detachment of coating and corrosion of the steel pipe.

      • KCI등재

        하천 제방 단면 특성이 동수경사에 미치는 영향에 관한 해석적 연구

        변요셉(Byun Yoseph),김종일(Kim Jongil),백승인(Baek Seungin),천병식(Chun Byungsik) 한국지반환경공학회 2012 한국지반환경공학회논문집 Vol.13 No.3

        최근 기상이변에 의해 대형 태풍과 집중 호우가 발생하게 되었고, 이로 인한 이상 홍수로 인해 제방 붕괴를 일으켜 인근지역에 직접적인 큰 재산피해와 인명피해를 가져오게 되는 일이 적지 않다. 본 논문에서는 하천제방 단면의 주요 특성치인 제방 둑마루 폭, 비탈면 경사도, 제방 높이의 변화에 따른 수치해석을 실시하였고, 유출부 동수경사를 분석하여 제방에 대한 안정성 검토를 실시하였다. 그 결과 비탈면 경사의 확대가 둑 마루폭 증가보다 유출부 영역에서의 동수경사 감소 효과를 더 크게 나타나는 것으로 평가되었다. 즉, 하천 제방 설계 및 보강 시 비탈면 경사의 확대가 둑 마루폭 증가보다 더 효과적인 것으로 판단된다. Due to recent climate change, big typhoon and heavy rainfall happen frequently not only in Korea but also all over the world. It leads to collapse of levee by extraordinary flood. It lead to collapse of levees by extraordinary flood. These natural disasters give the life and property damages in near region. In this study, it was performed that a stability in levee using seepage analysis. It has been evaluated hydraulic gradient of exit zone according to variations in levee crest width, gradient. As a result, it showed that hydraulic gradient of exit zone was decreased due to increase of levee crest width and gradient, and it was evaluated that vertical hydraulic gradient was decreased than that of the horizontal hydraulic gradient.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼