http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
백기봉(Kibong Baek),문현성(Hyunsung Mun),조승환(Seunghwan Cho) 한국추진공학회 2012 한국추진공학회 학술대회논문집 Vol.2012 No.11
고체추진제를 사용하는 발사체나 유도탄의 DCS용 추력발생장치 개발을 위하여, 열/구조해석과 유동해석 결과를 바탕으로 설계를 수행하고 그 결과를 이용하여 시제품을 제작하였다. 그리고 설계/제작된 DCS용 추력발생장치를 1축 시험대와 분력시험대를 사용하여 추력 및 시스템 모멘트를 계측하여 설계 결과를 검증하였다. A Heat/Stress/Fluid Dynamics Analysis has been performed in order to develop DCS thrust producing device for solid propellant, moreover a prototype has been made according to the analysis results. The developed DCS thrust producing device has been tested on 1-axis testing stand and component force testing stand to measure the device"s thrust and system moment, thus verifying the validity of the design results.
전영진(Youngjin Jeon),백기봉(Kibong Baek),임설(Seol Lim),서석훈(Suhkhoon Suh) 한국추진공학회 2011 한국추진공학회 학술대회논문집 Vol.2011 No.11
발사체나 유도탄의 자세제어를 위한 추력기 중 DCS용 추력발생장치 개발에 대하여 소개한다. 고체 추진제를 원료로 하는 DCS용 추력발생장치는 2축 제어를 기반으로 설계 되었으며 열구조해석 유동해석을 통해 상세설계를 진행하였다. 상세설계를 바탕으로 제작된 추력발생장치는 연소시험을 통해 성능을 입증한다. The development of the DCS thrust unit during the attitude control thruster of the launch vehicle and guided missile is introduced. The DCS thrust unit using solid propellants based on a two-axis control is designed and through the thermo-structural and flow analysis is designed in detail. The performance of the thrust unit based on the detail design is demonstrated through a combustion test.
비자성소재 삽입에 따른 아마추어 구동용 솔레노이드의 흡인력 변화에 대한 해석적 연구
서민교(Minkyo Seo),백기봉(Kibong Baek),조승환(Seunghwan Cho) 한국추진공학회 2014 한국추진공학회 학술대회논문집 Vol.2014 No.12
다양한 형태의 추진 시스템에서 유체 제어용으로 적용되고 있는 솔레노이드는 자성소재를 이용해 만든 보빈에 코일을 감고, 코일의 바깥쪽 주위에 자성소재로 만든 C자 형태의 프레임인 요크를 붙여 보빈과 요크를 흐르는 폐루프 자속을 얻는다. 본 연구에서는 보빈의 중간에 비자성소재를 삽입하여 폐루프 자속이 아마추어를 통과하게 함으로써 액추에이터의 구동력인 흡인력을 얻는 형태의 솔레노이드에 대해 전자기 해석을 수행하였으며, 삽입된 비자성소재의 길이를 따른 흡인력의 변화를 비교해 나타내었다. A solenoid being applied as for fluid control in various types of propulsion systems obtains closed-loop magnetic flux flowing through the bobbin and the yoke by winding a coil around a bobbin made with a magnetic material and attaching a yoke, the C-shaped frame made with a magnetic material around the outside of the coil. In this study, we carried out the electromagnetic analysis on the solenoid of the type obtaining attraction force, the driving force of an actuator by inserting a non-magnetic material in the middle of a bobbin and allowing closed-loop magnetic flux to go through the armature and compared the changes in attraction force depending on the length of the inserted non-magnetic material.
서석훈(Suhk-hoon Suh),백기봉(Kibong Baek),조승환(Seunghwan Cho) 한국추진공학회 2012 한국추진공학회 학술대회논문집 Vol.2012 No.11
본 논문에서는 추력발생장치용 구동장치를 개발하기 위하여 부하특성을 분석하였고 이를 고려하여 구동장치를 설계, 제작하였다. 제작한 구동장치는 판 스프링을 이용한 부하시험과 공압시험을 통하여 성능을 검증하였다. 시험 결과 구동장치의 무부하와 부하 특성의 차이를 확인하였으며, 이 차이의 개선을 위하여 정확한 모델링을 통한 제어게인 튜닝이 필요함을 확인하였다. In this paper, we development the actuation system for the thrust generation system. For design, load charateristic is analyzed by simulation, and the result is considered in the design. The designed actuation system is evaluated by load test and cold-gas test. The test result shows that exact modelling and control gain tunning is needed.
자성체의 투자율과 솔레노이드 흡인력 변화에 대한 해석적 연구
서민교(Minkyo Seo),백기봉(Kibong Baek),조승환(Seunghwan Cho) 한국추진공학회 2015 한국추진공학회 학술대회논문집 Vol.2015 No.11
액체 추진 시스템에서 유체 제어용으로 활용되는 솔레노이드는 자성체를 이용해 만든 보빈에 코일을 감고, 코일의 바깥쪽 주위에 자성체로 만든 C자 형태의 프레임인 요크를 붙여 보빈과 요크를 흐르는 폐루프 자속을 얻는다. 본 연구에서는 자성체의 비선형적인 투자율 증가에 따른 흡인력 변화를 예측하기 위해 범용 전산해석 코드인 FEMM 4.2를 이용하여 해석을 수행하였으며, 이를 통해 자성체의 비선형적인 투자율 증가를 고려한 솔레노이드 설계 활용방안을 제시하였다. A solenoid being applied as for fluid control in various types of space propulsion systems obtains closed-loop magnetic flux flowing through the bobbin and the yoke by winding a coil around a bobbin made with a magnetic material and attaching a yoke, the C-shaped frame made with a magnetic material around the outside of the coil. In this study, we carried out the electromagnetic analysis by using FEMM 4.2 to predict the attraction force changes according to non-linear permeability increase of the magnetic material, it presents the solenoid design utilizing considering the non-linear permeability increase of the magnetic material.
김경식(Kyungsik Kim),백기봉(Kibong Baek),박은주(Eunjoo Park),조승환(Seunghwan Cho),김수겸(Sugyeom Kim) 한국추진공학회 2011 한국추진공학회 학술대회논문집 Vol.2011 No.11
위성의 자세제어용 추력시스템에 대한 연료 공급용 솔레노이드 밸브의 국산화를 위해 Dual-Type의 솔레노이드 밸브를 개발하였다. Hydrazine을 연료로 사용하는 위성용 밸브는 반응속도, 유량, 누설 등의 기본성능 외에 수십만 번의 Cycle life, 충격 및 진동, 극저온 등의 환경 요인을 만족해야 한다. 본 논문에서는 설계 및 제작하고 질소 공압 장치를 이용한 성능 시험을 수행하였다. The Dual-type Solenoid Valve was developed for a domestic production of a fuel-supply valve on the satellite attitude control thruster system. The satellite valve using a hydrazine as a fuel must fulfill the cycle life, shock, vibration and the environment of an extremely low temperature In addition to the basic performance of the response time, mass flow and leakage etc.. in this paper, the design, production and performance experiment using the nitrogen pneumatic equipment were conducted.
탁효성(Hyosung Tak),백기봉(Kibong Baek),권오경(O Kyeong Kwon) 한국추진공학회 2020 한국추진공학회 학술대회논문집 Vol.2020 No.11
전기유압식 서보밸브는 항공우주분야의 다양한 환경조건에서 사용되어진다. 항공우주분야에 적용되는 전기유압식 서보밸브는 고온환경, 저온환경 등 다양한 환경조건에서도 정상적인 작동 성능을 유지하는 동시에 높은 신뢰성 또한 요구받는다. 본 연구에서는 전기유압식 서보밸브 토크모터의 기하학적 파라미터를 분석하여 온도 및 영구자석의 자속밀도 변화에 따른 전기유압식 서보밸브의 성능을 확인하였다. Electro-hydraulic servo valve are used in various environment conditions in the aerospace field. Electro-hydraulic servo valve applied to the aerospace fields are required to maintain normal operating performance under various environmental conditions such as high temperature and low temperature environment, while also requiring high reliability. In this study, the performance of the electro-hydraulic servo valve according to the temperature and magnetic flux density of the permanent magnet was confirmed by analyzing the geometric parameters of the electro-hydraulic servo-valve torque motor.