http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
여러 개의 모터에 의하여 제어되는 링-코어 자동 선별기 개발
박인규,Park, In-Gyu 대한전자공학회 2002 電子工學會論文誌-SC (System and control) Vol.39 No.2
인덕터 전기 부품을 구성하는 핵심 부품인 링-코어를 물질 특성, 인덕턴스 값 및 Q-값에 따라 10등급으로 분류하는 선별기를 설계하는 데 있어, 한번에 10개의 코어를 동시에 자동 분류할 수 있도록 설계한다. 동시에 10개의 코어를 자동 선별하려면 10개의 측정 장비가 필요한데, 이러한 측정 장비는 대단히 고가이므로, 하나의 측정 장비를 사용하여 10개의 링-코어를 검사한 후, 각각의 등급에 따라서 해당 그릇으로 저장하도록 한다. 이러한 시스템을 개발하는 데 있어서, 초당 0.5개의 생산 속도보다 빠른 속도인 초당 1개 정도로 측정 분류할 수 있는 속도가 필요하다. 시스템의 구성물은 먼저 작업 명령을 내려주고, 각종 생산 및 품질 통계를 관리하는 작업 PC와, 100개의 고무호스, 공급기, 측정기, 10개의 등급-상자, 1개의 메인-보드, 10개의 모터-제어-보드, 10개의 모터-드라이버-보드, 10개의 스텝-모터 등으로 구성되어 있다. 따라서 많은 고장, 오동작이 예상된다. 가장 중요한 사항은 일부의 모터 고장, 일부 모터 드라이버 보드 고장, 일부 모터 제어 보드 등의 고장이 발생하여도 작동이 멈추지 않도록 설계하는 것이다. 이를 위하여 센서 회로 추가 및 관련 소프트웨어 알고리즘을 개발한다. Core is the main component of inductor. This core should be classified into around 10 classes according to the value of inductance and Q. The coil should be winded with the outer-boundary of this core by different number of turns. Theses kind of precise inductors would be required in the future environment which PCs and communication devices demand more high speed and lower voltage level. It would be quite unefficient that only one core is classified once a time. There, it will be developed so that 10 cores are classified simultaneously. For the operation of classifying 10 cores once in a time, suppose 10 test instruments could be used. In this case, it would take much cost since a test instrument Is expensive. So, by using only one test instrument, it is really more desirable that this system is developed. Each core classified by 10 different classes is to be stored into the corresponding box through the corresponding rubber hose. 10 cores are passed on a serial line and are placed on each testing slot. Here, each core located at each slot is tested, and then the bowl located on the top of a step motor is moved into the corresponding spot by rotating step motor with some angles. Each bowl connected with the corresponding box through rubber hose. Actually 100 hoses are connected, 10 step motors are rotated at 10 different angles, so the size is really so big, the shape of connecting 100 hoses is so complicated. Therefore it is anticipated that the system would be going to be easily out of ordered. In this paper the main purpose is to make several suggestions to be able to work well in these kinds of being affected by the abnormal operation of motors and the flow of cores.
박인규,Park, In-Gyu 한국건강관리협회 1974 건강소식 Vol.2 No.7
독자 여러분의 많은 이용을 바랍니다. 기생충질환 예방 및 치료에 관한 문의 이외에도 일반질환에 대한 문의도 환영합니다. 의료계 권위자와 상담하여 지도해 드리겠습니다.
박인규,Park, In-Gyu 한국건강관리협회 1974 건강소식 Vol.2 No.8
독자 여러분의 많은 이용을 바랍니다. 기생충질환 예방 및 치료에 관한 문의 이외에도 일반질환에 대한 문의도 환영합니다. 의료계 권위자와 상담하여 지도해 드리겠습니다.
RIE 표면 텍스쳐링 모양에 따른 결정질 실리콘 태양전지의 영향
박인규,윤명수,현덕환,진법종,최종용,김정식,강형동,권기청,Park, In-Gyu,Yun, Myoung-Soo,Hyun, Deoc-Hwan,Jin, Beop-Jong,Choi, Jong-Yong,Kim, Joung-Sik,Kang, Hyoung-Dong,Kwon, Gi-Chung 한국진공학회 2010 Applied Science and Convergence Technology Vol.19 No.4
다결정 실리콘 웨이퍼 표면에 대면적 reactive ion etching (RIE) 장비로 표면 텍스쳐를 형성한 뒤 태양전지를 제작하였다. 웨이퍼 표면에 텍스쳐를 형성하는 것은 광학적 손실을 줄이기 위해 일반적으로 사용되는 방법으로 alkaline etching이 사용된다. 그러나 다결정 실리콘 태양전지의 경우 재료의 결정 방향에 따라 식각되는 alkaline etching은 텍스쳐링의 모양을 제어할 수 없어 효과적이지 못하다. 이와 달리 플라즈마 식각방법을 사용하면 표면 텍스쳐의 모양을 효과적으로 제어하여 조금 더 낮은 반사율을 얻을 수 있다. 하지만 텍스쳐 모양 조절로 얻은 낮은 반사율이 항상 높은 변환효율을 얻을 수 있는 것은 아니다. 본 연구에서는 대면적 RIE 공정 조건별로 얻은 태양전지 표면 텍스쳐의 모양에 따라 각각의 반사율과 양자효율 및 변환효율이 미치는 영향을 살펴보았다. We fabricated a plasma texturing for multi-crystalline silicon cells using reactive ion etching (RIE). Multi-crystalline Si cells have not benefited from the cost-effective wet-chemical texturing processes that reduce front surface reflectance on single-crystal wafers. Elimination of plasma damage has been achieved while keeping front reflectance to extremely low levels. We will discuss reflectance, quantum efficiency and conversion efficiency for multi-crystalline Si solar cell by each RIE process conditions.