http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
GIS 절연진단센서 설계와 연면방전에 따른 방사전자파 특성
박숭규(Sung-Gyu Park),최은혁(Eun-Hyeok Choi),이광식(Kwang-Sik Lee) 한국조명·전기설비학회 2012 조명·전기설비학회논문지 Vol.26 No.10
If obstacle in GIS(Gas Insulted Switchgear), its affects are great are on the community and it is consequently demanded lots of difficulities to recover and repair. Accordingly, diagnosis techniques, that are able to prevent from accidents before they happen by providing more stable and highly reliable power effectively and finding sign of the accidents is very important. A novel UHF(Ultra High Frequency)-microstrip antenna is presented. The measured impedance bandwidth of the proposed antenna is from 0.5GHz to 15GHz with the stop band from 0.5GHz to 10.7GHz for VSWR<2. Form results of this study, The antenna is will play an important role for the senser for insulation diagnosis system by UHF method of real site GIS and power equipment using SF<SUB>6</SUB> gas.
박혜리(Herie Park),이정환(Jung-Hwan Lee),최은혁(Eun-Hyuck Choi),박숭규(Sung-Gyu Park),김이국(Lee-Kook Kim),김기채(Ki-Chae Kim),이광식(Kwang-Sik Lee) 한국조명·전기설비학회 2009 한국조명·전기설비학회 학술대회논문집 Vol.2009 No.5월
This paper presents a basic data of the surface discharge characteristics for solid dielectric under non-uniform field in N₂/O₂ mixture gas. Used electrodes are needle and plane. Used solid dielectric is expoxy resin. With the variation of the mixture rates of the gas by 80[%]:20[%], 60[%]:40[%] and 40[%]:60[%] in same condition, we can obtain different surface dielectric strength. Increased pressure and thickness caused increased surface dielectric strength.
박혜리(Herie Park),최은혁(Eun-Hyuck Choi),이상호(Sang-Ho Lee),박숭규(Sung-Gyu Park),김정배(Jung-Bae Kim),박광서(Kwang-Seo Park),이광식(Kwang-Sik Lee) 대한전기학회 2008 대한전기학회 학술대회 논문집 Vol.2008 No.5
본 연구에서는 챔버 내에 압력 1~7[atm]의 Dry-Air를 주입한 후, AC전압을 인가하여, 전극의 모양에 따라 불평등 전계/준평등 전계를 형성하였을 시, 전극 사이에 넣은 고체절연물의 두께에 따른 연면방전 특성을 실험을 통하여 측정 · 비교한 것이다. 고체절연물로는 열경화성 플라스틱을 사용하였다. 챔버 내 Dry-Air의 주입압력이 높일수록 연면 절연파괴 전압이 높았고, 준평등 전계에서보다 불평등 전계 인가시 더 높은 절연파괴 전압을 얻을 수 있었다. 또한 고체절연물의 두께가 두꺼울수록 고체의 절연파괴 전압이 높았으며, 고체절연물의 두께가 2[㎜]일 경우, Dry-A의 연면 방전 특성이 SF. 보다 평균적으로 12~51[%] 낮고, 3[㎜]의 경우도 Dry-A의 연면방전 특성이 14~45[%] 가량 낮았다.
전극형상변화에 따른 Dry-Air 중의 에폭시 수지의 연면방전특성
박혜리(Herie Park),이정환(Jung-Hwan Lee),최은혁(Eun-Hyuck Choi),박숭규(Sung-Gyu Park),박광서(Kwang-Seo Park),이광식(Kwang-Sik Lee) 한국조명·전기설비학회 2008 한국조명·전기설비학회 학술대회논문집 Vol.2008 No.10월
This paper gives a basic data of the surface discharge characteristics for epoxy resin in Dry-Air. Used electrodes are needle to plane, sphere to plane and KS M3015 electrodes. With the changing electrodes in same condition, we can obtain different creeping lengthes, breakdown voltages and dielectric strengths, respectively. Dielectric strengths of Needle to plane electrodes are more higher than the others. Breakdown voltage and dielectric strength increase as the thickness of epoxy resin and creeping strength increase.