http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
비접촉 영구자석 기어의 전달토크 분석 및 전달토크 향상에 대한 연구
박규상,김찬호,김용재,Park, Gyu-Sang,Kim, Chan-Ho,Kim, Yong-Jae 한국전력공사 2015 KEPCO Journal on electric power and energy Vol.1 No.1
비접촉 영구자석 기어는 높은 효율과 신뢰성의 장점을 가지고 있다. 또한, 기계적인 마찰 손실이 없으며, 소음과 진동이 적고, 윤활유가 불필요 하다는 장점을 가지고 있다. 이러한 장점으로 인하여, 비접촉 영구자석 기어는 기계적 기어의 물리적인 접촉에 의한 문제를 해결할 수 있어 높은 관심을 받고 있다. 비접촉 영구자석 기어는 기계적 기어를 대체하여 접촉 없이 토크 전달이 가능하지만 낮은 토크밀도의 문제점을 가지고 있어, 이에 대한 개선이 요구된다. 따라서 본 논문에서는 비접촉 영구자석 기어의 낮은 토크밀도의 문제점을 개선하고자 새로운 폴피스 형상을 제안하였다. 제안된 폴피스 형상에 대한 설계변수와 토크 및 토크 리플과 같은 반응변수들 간의 함수 관계를 파악하기 위하여 반응표면법을 이용하였으며, 박스-벤켄 설계를 이용하여 실험계획법을 수립하였다. 이들의 관계를 예측하기 위해 필요한 실험데이터는 수치해석기반 2-D 유한요소법을 이용하였다. 따라서 본 논문에서는 비접촉 영구자석 기어의 토크밀도 및 출력밀도 향상을 위하여 형상에 대한 전달토크 분석을 수행하였으며, 박스-벤켄 설계를 이용하여 제안된 폴피스 형상을 최적설계 하였다. The non-contact permanent magnet gear has advantages of high efficiency and improved reliability. It has other advantages of no mechanical friction loss, very little noise and vibration, and no need for lubricant. With these advantages, the non-contact permanent magnet gear that solves the physical contact problem of the mechanical gear has drawn attention. Due to this unique non-contact characteristic, the non-contact permanent magnet gear which is capable of non-contact torque transmission has replaced mechanical gear. The mechanical gears which is in many fields of the modern industry, is used mostly for power transmitting mechanical devices. However, it also has the problem of a low torque density, which requires improvement. In this paper, a novel pole piece shape is proposed in order to improve the problem of low torque density of the non-contact permanent magnet gear. The experiment data required for predicting the relationships among them are obtained using finiteelement Operating method based on two-dimensional (2-D) numerical analysis. Therefore, this paper derived an optimal model for thenon-contact permanent magnet gear with the novel pole piece using the Box-Behnken design, and the validity of the optimal design of the proposed pole piece shape through variance analysis and regression analysis demonstrated. In this paper, we performed the thransfer torque analysis in order to improve the torque density and power density, we have performed on optimal design of proposed pole piece shape using box-behnken.
물리 모델 기반 가스터빈 압축기 입구 조건 변화에 따른 성능변화 분석에 관한 연구
박규상(Gyu Sang Park),방명환(Myeong Hwan Bang),곽유라(You Ra Gwak),강해수(Hae su Kang),장성호(Sung Ho Chang),최우성(Woo Sung Choi) 대한기계학회 2021 大韓機械學會論文集A Vol.45 No.1
가스터빈 시장은 국내 탈석탄, 탈원전 관련 환경규제 강화로 인해 친환경 LNG 연료를 사용하는 가스터빈 복합 화력발전의 운영 비율과 비중이 꾸준히 높아지고 있다. 복합 화력발전소의 가스터빈은 대기조건 변화와 운전시간 경과에 따라 성능저하가 매우 크기 때문에 성능감시와 분석을 통해 주기적인 정비가 필요하다. 특히 총생산 출력에서 50~60%의 출력을 소모하는 압축기는 가스터빈 성능에 영향을 주는 대표적인 요소이며, 압축기 오염은 가스터빈 성능저하와 직결된다. 압축기 오염은 입구부로 들어오는 부유물질들이 블레이드에 점착되어 공기의 질량유량을 감소시키고 압축비를 감소시켜 최종적으로 압축기의 성능을 저하시킨다. 본 연구에서는 상용 소프트웨어 Ebsilon을 이용하여 실 가스터빈을 모델링하고, 압축기 오염에 따른 성능저하 물리모델을 개발하여 발전소 실제 데이터와 비교 · 분석하였으며, 머신러닝 알고리즘을 사용해 가스터빈 성능저하를 예측하였다. The importance of combined-cycle power generation, in which natural gas is used, increases owing to the energy policies of the Korean government to reduce the use of coal and nuclear fuel. Monitoring and analysis of the performance changes of a gas turbine, as a key facility of combined cycle power plant, are required for a stable efficient operation. One of the factors affecting the gas turbine performance is the performance change of the compressor using 50~60% of the power output to compress the air. Contaminants (e.g., dust) in the air foul the compressor inlet and blades, which reduces the air mass flow rate and compression ratio and thus the compressor performance decreases. In this study, a gas turbine model obtained using the Ebsilon software based on a commercial gas turbine and physical model for the performance degradation are developed for an analysis and comparison to actual operation data of a power plant.
SEFTS 실현을 위한 Command Processor의 설계 및 구현에 관한 연구
박규상(Gyu-Sang Park),김행곤(Hang-Kon Kim),이경환(Kyung-Whan Lee),곽동용(Dong-Yong Kwak),노철우(Churl-Woo Nho),윤병남(Byung-Nam Youn) 한국정보과학회 1988 한국정보과학회 학술발표논문집 Vol.15 No.1
본 논문은 교환기 소프트웨어가 목적시스템에 설치되기전에 발생되는 많은 논리적인 문제점을 해결하고, 테스팅과 디버깅의 효율을 최적화하여, 보다 경제적으로 고도의 신뢰성을 갖는 소프트웨어를 생산할 수 있는 테스팅환경의 구축을 목적으로 한다. 이와 같은 목적으로 TDX-10 개발환경의 서브시스템인 SEFTS(Simulation Environment Function Test System)의 서브 시스템으로 test executor인 TCI(Testing Command Interpreter)와 보다 효율적인 테스팅을 지원하는 TCP(Testing Tool Command Processor)를 구현하였다.