http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
압출성형 수삼의 추출수율과 추출물의 저온압출 구형과립화
류기형(Gi-Hyung Ryu),J.P. Remon 한국식품영양과학회 2004 한국식품영양과학회지 Vol.33 No.5
압출성형공법을 이용한 수삼의 전처리를 통한 추출수율의 향상과 최적조건에서 열수 추출한 인삼추출액의 첨가량을 달리하여 저온압출공정으로 제조한 구형과립의 입자분포, 마모율, 용적밀도, 진동밀도, 압축지수와 용출패턴을 결정하였다. 열수 추출수율에서 수삼을 압출성형할 때 수분함량이 가장 유의적으로 영향을 미쳤다. 수분함량의 감소와 함께 스크류 회전속도가 증가할수록 압출성형 수삼의 추출수율이 크게 증가하였다. 추출수율이 최대가 되는 압출성형 공정변수는 수분함량 15%, 스크류 회전속도 250 rpm, 사출구 부위 온도 130℃였다. 동일한 추출조건에서 15개 압출성형 수삼 시료의 평균 추출수율(43.5%)은 홍삼(38.3%)과 백삼(29.0%) 추출수율과 비교하여 크게 향상되었다. 저온압출공정으로 압출성형 수삼농축액(고형분함량 59.2%)의 농도를 5, 20, 30, 40, 50, 60%로 각각 증류수에 희석한 용액 200 mL과 200 g 미세결정 셀룰로오즈를 이용하여 과립화시킬 수 있는 압출 성형 수삼추출액의 최대 농도는 60%였으며 추출액의 증가와 함께 입자수율의 증가, 마모율의 감소, 압출지수의 감소등으로 입자의 물리적 특성은 구형과립을 젤라틴 캡슐에 포장하여 제품화할 수 있었다. 또한 압출성형 수삼 추출액을 포함한 구형과립으로부터 농축액 성분이 10분 이내에 쉽게 용출되므로 구형과립은 젤라틴 캡슐에 적합하다는 결론을 내릴 수가 있었다. The objectives of the experiment were to examine the effects of extrusion process variables on the yield of extruded ginseng extract and to determine the effect of ratio of extruded ginseng extract and microcrystalline cellulose on characteristics of spheronized granules by cold extrusion-spheronization process. Extrusion process variables observed were feed moisture (15, 22, 29%), die temperature (90, 110, 130℃) and screw speed (150, 200, 250 rpm). The results showed that moisture content of dried ginseng significantly affected extraction yield (p<0.05). The less moisture content of the feed resulted in the higher yield of the extract. Moisture content of 15%, screw speed of 250 rpm and die temperature of 130℃ gave the highest yield of ginseng extract. Mean extraction yield of extruded ginseng using hot water extraction was greatly improved by extrusion process. The extract yield of extruded ginseng was 43.5% which was higher than that of red ginseng (38.3%) and white ginseng (29.0%) produced by traditional process. It was possible to make from the mixture of microcrystalline cellulose (200 g) mixed with different concentration of 200 mL solution (0, 5, 20, 30, 40, 50, 60% of ginseng extract with 59.2% dry solid) by using cold extrusion spheronization. When the concentration of ginseng extract increased, the granulation yield was improved but friability and compression index were reduced. Ginseng extract such as saponin was completely released from spheronized granules in distilled water within 10 min. It can be concluded that spheronized granule with ginseng extract could be packed in gelatin capsule since granules possessed proper physical properties and quick release of saponin.
류기형 ( Gi Hyung Ryu ),구본재 ( Bon Jae Gu ),( Krittika Norajit ) 한국산업식품공학회 2010 산업 식품공학 Vol.14 No.2
압출성형의 이점을 활용하여 영양적으로 단백질과 식이섬유가 풍부하며 조직감과 항산화 활성이 우수한 에너지바를 제조하기 위해서 탈지 삼종실 압출성형물의 팽화율, 밀도, 파괴력, 겉보기탄성계수, 수분흡착지수와 수분용해지수, 페이스트 점도를 측정하였다. 또한 압출성형물의 항산화활성을 측정하기 위해 DPPH에 의한 전자공여능을 측정하여 비교 분석하였다. 탈지 삼종실 에너지바 제조 후 품질특성조사를 위해 수분함량, 색도, 관능검사를 측정하였다. 압출성형 공정변수는 수분함량(20, 25%), 배럴온도(110, 130oC)이였으며 수분함량 20%, 배럴온도 130oC에서 팽화율이 가장 높았으며 밀도, 파괴력, 탄성계수가 낮았다. 수분함량이 증가할수록 수분흡착지수가 증가하였으며 수분용해지수는 배럴온도 130oC에서 높은 경향을 나타내었다. 압출성형 탈지 삼종실은 페이스트 점도 값이 낮게 나타났으며 DPPH에 의한 전자공여능 값은 수분함량 20%, 배럴온도 130oC에서 항산화활성이 높게 나타났다. 탈지 삼종실 에너지바제조 30일 후에 수분함량은 0.60-1.13% 상승하였으며 백색도와 황색도는 감소, 적색도는 증가하는 경향을 보였다. 관능평가 결과 압출성형 변수가 수분함량 20%, 배럴온도 130oC이며 탈지 삼종실이 첨가된 에너지바가 가장 좋게 평가되었다. 결론적으로 압출성형을 이용하여 삼종실을 첨가한 에너지바를 제조할 수 있었으며 중간소재인 압출성형물의 공정변수는 수분함량 20%, 배럴온도 130oC에서 가장 좋은 조건으로 판단되었다. This study was to develop high-nutritious energy bar from extruded hemp obtained by extrusion process. Mixture of rice flour and defatted hemp was extruded at a barrel temperature of 110 and 130oC, and moisture content of 20 and 25%. Properties of extrudates such as bulk density, expansion index, breaking strength, apparent elastic modulus, water absorption index (WAI), water solubility index (WSI) have been analyzed. The antioxidant potential was determined by the DPPH-radical scavenging assay. The expansion index was the highest in rice-hemp extrudate at 130oC barrel temperature and 20% moisture content among the other hemp-added extrudates. The WAI was increased with increase in moisture content, while the WSI was increased with increase in barrel temperature. The peak viscosity of rice extrudate had higher valule than those of extrudate added with hemp. DPPH scavenging activity of rice-hemp extrudate at 130oC barrel temperature and 20% moisture content showed the highest value. Sensory properties, moisture content and color were assessed for quality of energy bar. The color values of the energy bar indicated decreasing L (lightness) and b (yellowness), and increasing a (redness) after 30 days storage at ambient condition. The highest overall acceptable was the energy bar added with rice-hemp extrudate at 130oC barrel temperature and 20% moisture content.