http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
- 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
- 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
RISS 인기검색어
- 검색키워드
- 저자 : 노무근 (검색결과 22 건)
- 무료
- 기관 내 무료
- 유료
-
-
-
CV黑鉛鑄鐵의 磨滅特性에 미치는 Mn 및 Ni 微量添加의 影響
盧戊根,申世均,權赫茂 충남대학교 공업교육연구소 1986 論文集 Vol.9 No.1
The Influences of small additions of Mn, Ni and holding time after spheroidization treatment on the wear characteristics of CV graphite cast iron are studied. The main results are summarized as follows. 1) The graphite form of cast iron shows spheroidal type, CV type and flake type with increasing holding time after spheroidization treatment of melt. The graphite form does not change with increasing amounts of Mn and Ni. 2) The hardness and tensile strength of cast iron increase with increasing amounts of Mn and Ni contents. 3) The change in wear mechanism for CV graphite cast iron shows abrasive wear, corrosive wear and adhesive wear with increasing wear speed. 4) Wear resistance of spheroidal graphite cast iron shows the highest value of-all, and CV graphite cast iron shows greater value than flake graphite cast iron. The wear loss of Mn, Ni added CV graphite cast iron decreases with increasing amounts of additives.
-
주철의 열적 성질에 미치는 흑연형상 및 첨가원소 ( Mn , Ni)의 영향
노무근,권혁무 ( Moo Kun Roh,Hyuk Moo Kwon ) 한국주조공학회 1989 한국주조공학회지 Vol.9 No.1
N/A SGCI(Spheroidal Graphite Cast Iron), CVGCI(CV Graphite Cast Iron) and FGCI(Flake Graphite Cast Iron) having different contents of Mn(0.25%∼0.85%) and Ni(0.3%∼1.2%) were produced, respectively. The thermal expansion and thermal conductivity of the cast iron were investigated in the temperature range of 50℃∼300℃. As the graphite nodularity of the cast iron increases, thermal expansion coefficient increases, thermal conductivity and electrical conductivity to thermal conductivity ratio decrease. The thermal expansion coefficient of the cast iron increases with increasing Mn content and decreases with increasing Ni content. The thermal conductivity of the cast iron decreases with increasing Mn and Ni contents.
-
盧戊根 三陟大學校 1997 論文集 Vol.30 No.2
The engulfment of a particle suspended in a melt by a freezing interface requires replacement of two interfaces by a single interface. Since each of these interfaces has a tension associated with it, the process of interface substitution must be energetically feasible for the engulfment of particles to be spontaneous. From a thermodynamic point of view, engulfment is spontaneous when ??, and it is unfavorable when ??. The total free energy change during the process of engulfment is ?? where ?? and ?? are the specific surface energies of the solid-particle and particle-liquid interfaces, respectively. Alternatively, the free energy of adhesion must also be negative for the engulfment to be spontaneous. At slow growth rates and in the absence of external forces, the engulfment or pushing of particles by a freezing interface can be qualitatively predicted on the basis of the above thermodynamic criterion. Particle engulfment and rejection may depend on the fluid mechanics of the solidification process, and on the thermodynamic properties such as interfacial tension, temperature and concentration, and on the thermodynamic properties such as interfacial tension, temperature and concentration, and also on the supersaturation or supercooling of the crystallizing liquid. If the rate of solidification is low and the solid-melt interface is smooth, the thermodynamic effects are to dominate. This study was carried out with the viewpoint of interfacial energy effects on the behavior of Al₂O₃ particles in Al marix.
-
Al 複合材料의 固液界面에 미치는 Ti의 影響에 關한 硏究
盧戊根 三陟大學校 産業科學技術硏究所 1999 産業科學技術硏究論文集 Vol.4 No.-
This study was carried out the methods of unidiretional solidification experiments in a countergravitational vertical configuration on premixed Al-Al₂O₃-Ti composites melts under fixed growth conditions of Rate 2.0mm/hr. and gradient of furnace 3.09K/mm. The Ti presence in Al-Al₂O₃composites make Al₂O₃particle engulf readily from liquid composites phase to solid composites phase. This is can be eluidated by increasing of interfaial energy between ceramic Al₂O₃particle and liquid and also can be describe by decreasing of interfacial energy between solid and ceramic particle
-
盧戊根 三陟大學校 1998 論文集 Vol.31 No.2
It is the purpose of this study to get informations on the mechanical properties of cast iron having different shape of graphite and different additions of Mn and Ni, respectively. Therefore, they were investigated systematically by measuring hardness and tensile strength. The graphite form of cast iron shows spheroidal type, CV type and flake type with increasing holding time after spheroidization treatment. The hardness and tensile strength of cast iron increase with increasing graphite nodularity and amounts of Mn, Ni, contents.
-
盧戊根,金大壽,文亨泰 三陟大學校 2000 論文集 Vol.33 No.2
The purpose of this study is to establish the fundamental informations of melting and manufacturing processes of spheroidal graphite cast iron by means of experiments. The main results obtained are as follows. The tensile strength of 45kg/㎟ SGCI was produced at the residual Magnesium of 0.04%, and the spheroidization treatment temperature of 1500℃. thickness of refractories 45cm above is the appropriate condition of manufacturing the furnace, and the sintering experiment Ⅱ process gives the stability of production processes. The higher the temperature of casting sand, the more specimen weight and moisture contents The higher the moisture contents of casting sand, the lower the compressive strength of mold.
-
盧戊根,柳在植 三陟大學校 1999 論文集 Vol.32 No.2
The spheroidal graphite cast iron utilized as screw jack for the purpose of industrial applications were investigated. The production sequence and process control factors for producing the spheroidal graphite cast iron, the thermal analysis experiments of cooling curve investigation during the solidification of spheroidal graphite cast iron were studied. The various morphologic and the variation of graphite shape and form were investigated by low scanning electron microscope. The calculation and evaluation of charging raw materials to produce the screw jack of spheroidal graphite cast iron were accomplished.
-
Wear mechanism에 미치는 Graphite형상의 영향에 관한 연구
盧戊根,金大壽 三陟大學校 1996 論文集 Vol.29 No.2
It is the purpose of this study to find the basic informations on the wear mechanism and wear characteristics of cast iron having different additions of Manganese and Nickel. The graphite form of cast iron shows spheroidal type, CV type and flake type with increasing holding time after spheroidization treatment. The hardness and tensile strength of cast iron increase with increasing graphite nodularity and amounts of Mn, Ni contents respectively. The change in wear mechanism with increasing abrasion speed for cast iron shows abrasive wear, oxidative wear and adhesive wear. Wear resistance of spheroidal geaphite cast iron shows the highest value of all, and CV graphite cast iron shows greater value than flake graphite cast iron. The wear loss of Mn, Ni added iron decreases with increasing amounts of additions.
KISS연관 검색어 추천
이 검색어로 많이 본 자료
활용도 높은 자료
