http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김태권,박정,신현동,Kim, Tae Kwon,Park, Jeong,Shin, Hyun Dong 대한기계학회 1999 大韓機械學會論文集B Vol.23 No.6
An experimental investigation has been conducted with the objective of studying the mixing mechanism near the nozzle exit in a tone-excited jet diffusion flame. The fuel jet was pulsed by means of a loudspeaker-driven cavity. The excitation frequencies were chosen for the two cases of the non-resonant and resonant frequency identified as a fuel tube resonance due to acoustic excitation. The effect of tone-excitations on mixing pattern near the nozzle exit and flame was visualized using various techniques, including schlieren photograph and laser light scattering photograph from $TiO_2$ seed particles. In order to clarify the details of the flame feature observed by visualization methods, hotwire measurements have been made. Excitation at the resonant frequency makes strong mixing near the nozzle. In this case, the fuel jet flow in the vicinity of nozzle exit breaks up into disturbed fuel parcels. This phenomena affects greatly the combustion characteristics of the tone excited jet and presumably occurs by flow separation from the wall inside the fuel nozzle. As a result, in the resonant frequency the flame length reduces greatly.
김태권(Kim, Tae Kwon),박종철(Park, Jong Choel) 한국산학기술학회 2014 한국산학기술학회논문지 Vol.15 No.5
본 연구에서는 노래방 화재의 위험성을 예측하기 위하여 2-zonemodelCFAST소프트웨어를 이용하여 해석을 수행 하였다.모델은 3차원 비정상 상태이다.또한,CFAST의 해석 결과와 실제 화재 재현 실험결과를 비교 분석하여 CFAST의 정확성이 검증되었다.해석 결과 화재가 발생된 방에서 화재발생 5분 이내에 산소농도는 10% 까지 감소하며,이산화탄소 농도는 5%까지 증가하였다.따라서 노래방과 같은 밀폐된 공간에서는 유독가스에 의한 질식으로 더 위험한 상황이 발생한다 는 것을 예측할 수 있다. In this study, 2-zone model CFAST software was used to predict the fire hazard of karaoke. Model is a three-dimensional unsteady state. Accuracy of CFAST is verified by comparing result of CFAST analysis with result of real fire experiment. For analysis results, the oxygen concentration were reduced to 10% within 5 minutes in room 5, the carbon dioxide concentration were increased to 5%. Therefore, at the enclosed space like karaoke, we can predict that dangerous situation would occur and people be suffocated because of toxic gas.
배열회수보일러(HRSG)의 입구유동 경계조건에 따른 유동특성 변화에 관한 연구
김태권(Tae Kwon Kim),이부윤(Boo Yoon Lee),하지수(Ji Soo Ha) 한국가스학회 2011 한국가스학회지 Vol.15 No.3
본 연구는 배열회수보일러(HRSG)에서의 유동특성을 유동수치해석을 통하여 분석하였다. HRSG 입구영역은 가스터빈 후류의 출구에 해당하고 가스터빈 후류는 강한 선회 및 난류 유동이다. 따라서 HRSG 입구 유동은 가스터빈 출구 유동 특성이 고려되어야 한다. 본 연구에서는 HRSG 입구 유동 경계조건을 가스터빈 출구 유동 해석을 통하여 도출된 결과를 이용하였다. 가스터빈 출구 유동해석 결과를 보면 축방향 속도가 가장 크게 나타나는 곳이 원형 덕트의 벽면 측이고 난류운동에너지와 소산율이 크게 나타나는 곳이 속도 구배가 급격한 곳으로 축방향 속도가 최대가 되는 곳과 차이가 있다. 본 연구에서는 HRSG 입구영역에서의 난류 성분을 가스터빈 출구 유동을 계산 한 결과를 이용한 경우와 난류강도를 속도의 10%를 이용하고 원형 덕트의 직경을 특성 길이로 사용한 두 가지 경우에 대하여 유동해석을 통하여 유동 특성을 비교하였다. 본 연구를 통하여 HRSG 입구 유동 경계조건은 반드시 난류성분이 올바르게 적용되어야 HRSG 유동 특성 해석의 정확성을 기할 수 있음을 알았다. The present study has been carried out to analyze the flow characteristics of a heat recovery steam generator with the change of inlet flow conditions by using numerical flow analysis. The inlet of HRSG corresponds the outlet of gas turbine exit and the flow after gas turbine has strong swirl flow and turbulence. The inlet flow condition of HRSG should be included the exit flow characteristics of gas turbine. The present numerical analysis adopted the flow analysis result of gas turbine exit flow as a inlet flow condition of HRSG analysis. The computational flow analysis result of gas turbine exit shows that the maximum axial velocity appears near circular duct wall and the maximum turbulent kinetic energy and dissipation rate exist relatively higher gradient region of axial velocity. The comparison of flow analysis will be executed with change of inlet turbulent flow condition. The first case is using the inlet turbulent properties from the result of computational analysis of gas turbine exit flow, and the second case is using the assumed turbulent intensity with the magnitude proportional to the velocity magnitude and length scale. The computational results of flow characteristics for two cases show great difference especially in the velocity field and turbulent properties. The main conclusion of the present study is that the flow inlet condition of HRSG should be included the turbulent properties for the accurate computational result of flow analysis.
연료유량 변화에 따른 원추형 MILD 연소로의 수치적 해석
김태권(Kim, Tae Kwon) 한국산학기술학회 2014 한국산학기술학회논문지 Vol.15 No.6
MILD(Moderate and Intense Low Oxygen Dilution) 연소는 열효율 향상과 유해배출가스 저감의 상반된 관계를 해결하기 위한 하나의 각광받는 기술이다. 연소가스의 재순환을 이용하여 고온 연소시에 질소산화물을 낮게 유지함과 동시 에 연소로 내부온도를 균일화함으로써 열효율을 향상시킬 수 있는 기술이다. 본 연구는 실험실 규모의 노에서 원추형 MILD 연소기의 연소특성을 나타내고 있다. 연구의 조건은 공기의 유량은 일정하게 하면서 가스 연료 유량을 변화시켜 당량비를 변화시켰다. 이 결과 노 내에서 MILD 연소영역이 잘 구현되었고, 당량비 0.69~0.83의 범위에 걸쳐서 노(爐)내에서의 온도와 배출가스의 농도가 각각 예측되었다. 이 당량비 구간에서 최고화염온도 영역과 주 반응영역에서의 온도차가 약 300℃의 안정 적인 화염 영역의 존재를 확인하였다. MILD combustion is a highly favored technology for solving the trade-off relation between high thermal efficiency and low pollutant emissions. The system has low NOx concentration in high temperature combustion by recirculating the combustion gas, as well as improving the thermal efficiency by making the internal temperature in a combustion furnace uniform. This study describes the combustion characteristics of a conical MILD combustor in a laboratory-scale furnace by adjusting the equivalence ratio with the fuel gas flow rate while maintaining a constant air flow rate of the furnace. The MILD regime in the furnace is well characterized and the in-furnace temperature and emissions were predicted, respectively, for the range of equivalence of 0.69 - 0.83. For the range of equivalence ratios, this study confirmed the existence of a stable flame region that has an approximately 300℃ temperature difference between the maximum flame temperature region and main reaction region.