http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
진공 프린팅 성형 인쇄법(VPES)을 이용한 R.G.B.Y(Red, Green, Blue, Yellow) LED 광원 연구
장민석(Min-Suk Jang),김영우(Yeoung-Woo Kim),신기해(Gi-Hae Shin),박정욱(Joung-Wook Park),홍진표(Jin-Pyo Hong),송상빈(Sang-Bin Song),김재필(Jae-Pil Kim) 한국조명·전기설비학회 2011 조명·전기설비학회논문지 Vol.25 No.2
In order to develop highly-integrated RGBY(Red, Green, Blue, Yellow) LED light, a high thermal radiation ceramic package was manufactured, and the encapsulation process was applied with a vacuum printing encapsulation system(VPES). After the completion of vacuum printing, the shape of the encapsulation layer could be controlled by heat treatment during the curing process, and the optical power became highly increased as the encapsulation layer approached a dome shape. The optical characteristics involved in a Correlated Color Temperature(CCT), a Color Rendering Index (CRI), and the efficiency of RGBY LED light were able to be identified by the experimental designing method. Regarding the characteristics of the white light of RGBY LED light, which were measured on the basis of the aforementioned optical characteristics, CRI posted 88, CCT recorded 5,720[°K], and efficiency exhibited 52[lm/W]. The chip temperature of RGBY LEDs was below 55[℃] when the consumption power of LED chips was 0.1[W] for the red, 0.3[W] for the green, 0.08[W] for the blue, and 0.24[W] for the yellow. Also, the thermal resistance of the highly-integrated RGBY LED light measured by T3Ster was 2.3[K/W].
심재민(Jae-Min Sim),김재범(Jae-Bum Kim),김영우(Yeoung-Woo Kim),송상빈(Sang-Bin Song),유영문(Yeoung-Moon Yu),김재필(Jae-Pil Kim) 한국조명·전기설비학회 2008 한국조명·전기설비학회 학술대회논문집 Vol.2008 No.5월
??본 연구에서는 빛을 확산시키기 위하여 LED(light emitting diode) 봉지층내에 마이크로 스피어를 형성하였다. 마이크로 스피어는 극성이 다른 이 종의 봉지재(실리콘, 에폭시)를 혼합하여 제조하였으며, 최적 첨가비율은 0.6wt% 이내였다. 광학현미경을 이용하여 측정한 결과, 마이크로 스피어의 직경은 4㎛ 내외였으며, 마이크로 스피어는 서로 들러붙거나 침전하지 않았다. LED의 효율은 봉지재의 첨가비율이 증가할수록 감소하였으며, 0.6wt% 첨가하였을 때 약 10% 이내의 효율 감소를 보였다. 지향각은 봉지재 첨가비율을 0~0.6wt%로 변화시키면 50도에서 110도까지 증가하였다.
심재민(Jae-Min Sim),김재범(Jae-Bum Kim),김영우(Yeoung-Woo Kim),송상빈(Sang-Bin Song),유영문(Yeoung-Moon Yu),김재필(Jae-Pil Kim) 한국조명·전기설비학회 2008 한국조명·전기설비학회 학술대회논문집 Vol.2008 No.5월
본 연구에서는 실리케이트 적색 형광체의 신뢰성올 향상시키기 위하여 SiO₂ 박막을 졸-겔(sol-gel) 방법으로 코팅하였으며, 봉지재의 종류에 따른 코팅된 형광체의 신뢰성 변화를 조사하였다. 졸-겔 코팅 후 형광체 표면을 관찰한 결과 졸-겔 코팅이 잘 이루어 졌음을 알 수 있었으며, 4회 코팅 후 박막의 두께는 약 150㎚였다. 코팅하지 않은 형광체의 경우 봉지재에 따른 차이는 있었지만 500시간 경과 후 효율 감소율은 30% 이상이었으며 코팅 한 형광체의 경우는 에폭시, JCR6175가 10~25%, EG6301은 10% 이내의 효율 감소율을 보였다. 한편 색 좌표 경우 에폭시 봉지재가 약 0.02의 변화를 EG6301 봉지재의 경우 0.01 이내의 변화를 보였다.
VPES 방식을 이용한 R.G.B.Y LED 광원 제작
장민석(Min-Suk Jang),신기해(Gi-Hae Shin),이광철(Kwang-Chul Lee),김영우(Yeoung-Woo Kim),홍진표(Jin-Pyo Hong),송상빈(Sang-Bin Song),김재필(Jae-Pil Kim) 한국조명·전기설비학회 2010 한국조명·전기설비학회 학술대회논문집 Vol.2010 No.5월
본 연구에서는 고집적 R.G.B.Y 단일 광원을 개발하기 위하여 평면상의 COB 형태의 패키지에 VPES (Vacuum Printing Encapsulation System) 공법을 적용하였다. 전산 모사 결과 Hyperbolic 형태가 가장 높은 광 추출을 보였으며, 실제 패키징 한 실험 결과 에서는 80℃(1시간) - 150℃(1시간)에서 Curing한 Spherical 형태의 봉지형태가 광 출력이 우수하였다. 이 실험을 토대로 R, G, B, Y 패키지를 제작하여 광 특성을 측정한 결과 CRI는 88, CCT는 5,720K, Efficacy는 52 ㏐/W의 효율을 보였다.
조남웅(Cho, Nam-Ung),황순철(Hwang, Soon-Cheol),한상무(Han, Sang-Moo),김영우(Kim, Yeoung-Woo),김승구(Kim, Seng-Goo),전재호(Jun, Jae-Ho),김도형(Kim, Do-Hyeong),전중환(Jun, Joong-Hwan) 한국신재생에너지학회 2007 한국신재생에너지학회 학술대회논문집 Vol.2007 No.06
Stacks of solid oxide fuel cell under 1kW max power were designed on planar type employing anode supported cell and metallic interconnects. The stacks composed of 3-cells, 8-cells, and 16-cells were fabricated by using single cell purchased from Indec, sealant and interconnect prepared at RIST. In performance test of the final 16-cells stacks, OCV was recorded to be 16.7 V. Peak power and power density were 1 kW, 0.77 W/cm^{2} at 820?C, respectively. In addition, the long term degradation rate of the power exhibited 2.25 % in 500 h at 750?C.