http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
一般的인 薄板構造物이 一般的인 荷重下에 있을 때 强度 및 振動 特性의 有限要素法에 依한 解析
김항욱 한국항공대학교 1976 論文集 Vol.10 No.-
In order to find out the main difficulties in difining a shell finite element forgeneral shells under general loading conditions, several finite elements for shells which are used these days are carefuuy exmained. It was learned that the main difficulties come from the prepatation of constant matrices which are different from each other for every cases because the geometric parameters are varying for cases. A systematic integration method was deviced so that the prepatation of those matrices can be done by computer itself including all the integrations. The main pattern of these work is described and some of the intermediate results are presented for the readers to apply. A typical numerical example is treated to demonstrate the capability of this method. The numerical result was compared with referrence in tabulation and in drawing.
유한요소법의 기본리론과 응용(II) -방향변환에 따르는 변환 매트릭스-
김항욱 대한기계학회 1977 大韓機械學會誌 Vol.17 No.1
먼저번에는(대한기계학회지 제16권 제4호 1976) 유한요소법의 중심부를 통하는 기본로선을 따라 가면서 기초 개념을 해설하였다. 이 해설에서 앞으로 취급될 사항은 다음과 같다. 1. 트러스 구조물의 정역학적 문제를 예제로 다루며 방향변환에 따르는 "변환매트릭스"해설 2. 기둥의 탄성 안정 문제를 예제로 다루며 비 선형 문제에서 등장하는 "추가 강성매트 릭스 (Incremental Stiffness Matrix)[N]의 해설 3. 1차원 문제에 있어서의 여러 가지 유한요소 해설 4. 2차원 문제에 있어서 평면형을 갖는 여러 가지 유한요소 해설 5. 2차원 문제에 있어서 곡면형을 갖는 여러 가지 유한요소 해설 6. 유한요소법의 발전 전망 7. 전자계산기 프로그래밍에 있어서의 여러문제 해설의 대상자는 공과대학 기계계열의 상급학년 학생 또는 고체역학 부문에 경력을 갖는 기술자 들로서 이 부문의 기본지식을 갖고 있는 자로 한다. 이번회에는 유한요소의 자유도 즉 미지상 수로 다루어지는 자변수의 좌표축이 바뀔 때 부수적으로 등장하는 변환 매트릭스에 대하여 해 설한다.트릭스에 대하여 해 설한다.
金恒旭 한국항공대학교 1975 論文集 Vol.8 No.-
航空機體의 主部分인 胴體를 圓筒形과 圓錐臺形構造의 結合體로 模型化 했음을 前題로 하고 圓錐臺形 SHELL 構造의 振動問題를 FINITE ELEMENT 方法으로 다루었으며 計算된 結果를 旣存結果와 比較圖示하였음.
金恒旭 한국항공대학교 1977 論文集 Vol.12 No.-
In order to evaluate the capability of the well known beam finite element with four degrees of freedom, a six degrees of freedom beam finite element is specified by adding curvature coordinate at each boundary. This idea came up considering the beam governing equation in which the curvature enters. The matrix governing equation is derived by Lagranges equation for the new finite element. The concerning constant matrix is obtained by performing the systematic integration. Typical problems are solved using the two finite elements and the results are compared to find the fact that, for the nodal degrees of freedom, the conventional finite element gives as accurate result as the new one, but, for the displacement field within and element, the six degrees of freedom finite element gives much better results.
문관호,김항욱 한국항공대학교 1986 論文集 Vol.24 No.-
A Finite Element Model based on the super-parametric shell element is studied for the dynamic analysis of rotating structure of arbitrary shape and thickness. The linearized equations of motion derived for the rotating structure, including the effect of the centrifugal mass, centrifugal force vector and the pseudo static equilibribrium position, have good accuracy and save the cumputational time, instead of complexity of the non-linear one previously studied. The power of the method is illustrated by applying it to a pretwisted rectangular plate and tapered cylinderical type blade.
항공기체에서 구조의 불연속이 응력분포에 미치는 영향에 관한 연구
정의승,김항욱 한국항공대학교 1985 論文集 Vol.23 No.-
The structural dis continuity in aircraft fuselage. Such structural discontinuity eventually causes the stress ooncentration phenomena according to the state of load. For the structural discontinuity in an aircraft fuselage, this study solved the stress distribution state by using cylindrical fuselage under pure torsion is treated. The stress concentration phenomena dus to the affecting factors, such as, the distance between rivets, and the thickness of the shell are investigaated. The results are displayed by plotting the stress concentration factor for the distance from the rivet joint. The design data for stiffening method and the results of thickness stiffening are also presented.
김항욱 대한기계학회 1976 大韓機械學會誌 Vol.16 No.4
유한요소법이 처음 연구되기 시작할 때는 변위를 가변수로 하는 매트ㄹ스 변위법(Matrix Displacement Method) 과 외력을 자변수로 하는 매트ㄹ스 힘 방법(Matrix Force Method)외 두 길로 발전되어 갔었으나 경계 조건의 적용과 매트ㄹ스 분활(Partitioning)에 있어서 후자의 방법이 많은 번거로움을 갖는다는 것이 인정되어 오늘날은 전자의 방법 만이 사용되는 형편이다. 본 해 설에서는 유한요소의 기본성질을 모두 가지면서도 제일 간단한 보유한요소(Beam Finite Element )를 예로 다루며 유한 요소법의 기본이론과 응용방법을 설명코저 한다.