A Case Study of Risk Assessment of Ozone Impact on Forest Tree Species in Japan

Watanabe, Makoto,Yamaguchi, Masahiro,Matsumura, Hideyuki,Kohno, Yoshihisa,Koike, Takayoshi,Izuta, Takeshi Korean Society for Atmospheric Environment 2011 Asian Journal of Atmospheric Environment (AJAE) Vol.5 No.4

Ozone ($O_3$) is a main component of photochemical oxidants and a phytotoxic air pollutant. Although the current levels of tropospheric $O_3$ in East Asia could adversely affect productivity of forest tree species, risk assessments of $O_3$ impact were limited. In this paper, we summarize the methodology of risk assessment of $O_3$ on forest tree species based on our two previous studies, risk assessments of $O_3$ impact on the growth of Fagus crenata by Watanabe et al. (2012) and on the annual carbon absorption of three representative conifers, Cryptomeria japonica, Pinus densiflora and Larix kaempferi by Watanabe et al. (2010). $O_3$ sensitivity of each tree species obtained from an experimental study, $O_3$ exposure and atmospheric N deposition based on field monitoring and vegetation survey were integrated by geographic information system method. Based on the results, we conclude that the area with high risk of $O_3$ impact does not necessarily correspond to the area with high $O_3$ exposure. The varieties of tree habitat, tree sensitivity to $O_3$ and annual carbon absorption among the tree species, and N deposition-induced change in the $O_3$ sensitivity of F. crenata are raised as the factors of discordance between areas with high risk and those with high $O_3$ exposure. In the last part of this paper, we discuss the present uncertainty and perspectives of risk assessment for the future studies on the impact of $O_3$ on forest tree species in East Asia.

A Case Study of Risk Assessment of Ozone Impact on Forest Tree Species in Japan

Makoto Watanabe,Masahiro Yamaguchi,Hideyuki Matsumura,Yoshihisa Kohno,Takayoshi Koike,Takeshi Izuta 한국대기환경학회 2011 Asian Journal of Atmospheric Environment (AJAE) Vol.5 No.4

Ozone (O_3) is a main component of photochemical oxidants and a phytotoxic air pollutant. Although the current levels of tropospheric O_3 in East Asia could adversely affect productivity of forest tree species,risk assessments of O_3 impact were limited. In this paper, we summarize the methodology of risk assessment of O_3 on forest tree species based on our two previous studies, risk assessments of O_3 impact on the growth of Fagus crenata by Watanabe et al. (2012) and on the annual carbon absorption of three representative conifers, Cryptomeria japonica, Pinus densiflora and Larix kaempferi by Watanabe et al. (2010). O_3 sensitivity of each tree species obtained from an experimental study, O_3 exposure and atmospheric N deposition based on field monitoring and vegetation survey were integrated by geographic information system method. Based on the results, we conclude that the area with high risk of O_3 impact does not necessarily correspond to the area with high O_3 exposure. The varieties of tree habitat, tree sensitivity to O_3 and annual carbon absorption among the tree species, and N deposition-induced change in the O_3 sensitivity of F. crenata are raised as the factors of discordance between areas with high risk and those with high O_3 exposure. In the last part of this paper, we discuss the present uncertainty and perspectives of risk assessment for the future studies on the impact of O_3 on forest tree species in East Asia.

Study on the Biomolecular Adsorption on Titanium Implant Retrieved from Rat Bone

Watanabe K,Okawa S,Kanatani M,Ito K,Kaneko H,Yamaga Y 대한치과재료학회 2011 대한치과기재학회 학술대회 Vol.2011 No.5

Signal Transduction of the Cytokine Receptor

Watanabe, Sumiko The Korean Society for Integrative Biology 1998 Korean journal of biological sciences Vol.2 No.2

Cytokines regulate proliferation, differentiation and functions of haemotopoietic cells. Each cytokine possesses a variety of activities on various target cells (pleiotropy) and various cytokines have similar and overlapping activities on the same target cells (redundancy). The nature of these cytokine activities predicts unique feature of cytokine receptors, namely, cytokine has multiple receptors, different cytokines share a common receptor, and different cytokine receptors are linked to common signaling pathways. cDNA cloning of genes for cytokine receptors revealed distinct sets of receptor family with different structural features. The cytokine receptor superfamily consists of a largest family, and contains more than twenty cytokine receptor subunits. This receptor has common structural features in both extracellular and intracellular regions without tyrosine kinase domain. Another striking feature of the receptor is to share common subunit of multiple cytokines, which partly explains the redundancy of activities of some cytokines. Recent studies revealed detailed signaling events of the cytokine receptor, the primary activation of JAK and subsequent phosphorylation of tyrosine residues of receptor, and various cellular proteins. Many SH2 containing adapter proteins play an important role in cytokine signals, and this system has similarities with tyrosine kinase receptor signal transduction. STAT may mainly account for cytokine specific functions as suggested by knockout mice studies. It is of importance to note that cytokine activates multiple signaling pathways and the balance and combination of related signaling events may determine the specificity of functions of cytokines.

Technical Development in Soybean Processing in Japan

Watanabe, Tokuji 한국콩연구회 1986 韓國콩硏究會誌 Vol.3 No.2

Quantum fluctuation theorems and generalized measurements during the force protocol.

Watanabe, Gentaro,Venkatesh, B Prasanna,Talkner, Peter,Campisi, Michele,H?nggi, Peter Published by the American Physical Society through 2014 Physical review. E, Statistical, nonlinear, and so Vol.89 No.3

<P>Generalized measurements of an observable performed on a quantum system during a force protocol are investigated and conditions that guarantee the validity of the Jarzynski equality and the Crooks relation are formulated. In agreement with previous studies by M. Campisi, P. Talkner, and P. H?nggi [Phys. Rev. Lett. 105, 140601 (2010); Phys. Rev. E 83, 041114 (2011)], we find that these fluctuation relations are satisfied for projective measurements; however, for generalized measurements special conditions on the operators determining the measurements need to be met. For the Jarzynski equality to hold, the measurement operators of the forward protocol must be normalized in a particular way. The Crooks relation additionally entails that the backward and forward measurement operators depend on each other. Yet, quite some freedom is left as to how the two sets of operators are interrelated. This ambiguity is removed if one considers selective measurements, which are specified by a joint probability density function of work and measurement results of the considered observable. We find that the respective forward and backward joint probabilities satisfy the Crooks relation only if the measurement operators of the forward and backward protocols are the time-reversed adjoints of each other. In this case, the work probability density function conditioned on the measurement result satisfies a modified Crooks relation. The modification appears as a protocol-dependent factor that can be expressed by the information gained by the measurements during the forward and backward protocols. Finally, detailed fluctuation theorems with an arbitrary number of intervening measurements are obtained.</P>

The history of IFMFC - The accumulated knowledge and experience of the magnetic force control with IFMFC

Watanabe, Tsuneo The Korea Institute of Applied Superconductivity a 2016 한국초전도저온공학회논문지 Vol.18 No.1

The history of IFMFC (International Forum on Magnetic Force Control) shows the usefulness of the magnetic force control in the fields of the environment and material resource in Japan, Korea and China. The IFMFC started in 2010 and has been organized in every year. This paper shows the application of the magnetic force control in each countries with the accumulated knowledge and experience of the magnetic force control with IFMFC.

Internal Flow and Limiting Streamlines Observations of Contra-Rotating Axial Flow Pump at Partial Flow Rate

Watanabe, Satoshi,Momosaki, Shimpei,Usami, Satoshi,Furukawa, Akinori Korean Society for Fluid machinery 2011 International journal of fluid machinery and syste Vol.4 No.2

An application of contra-rotating rotors, in which a rear rotor is in tandem with a front one and these rotors rotate in the opposite direction each other, has been proposed against a demand for developing higher specific speed axial flow pump. One prototype rotors, which we have designed with a conventional method, has given the positive slope of head characteristic curve especially in the rear rotor. It is necessary to understand the internal flow behavior in the rear rotor to establish the design guideline for achieving higher and more reliable performance. In the present study, we carried out the experimental investigations of the internal flow field of the rear rotor, especially at the partial flow rate, by Laser Doppler Velocimetry (LDV) for the main flow and the limiting streamlines observation on rotor surfaces for the boundary layer flows.

Three-Dimensional Analysis of the Ideal Entry Point for Sacral Alar Iliac Screws

Watanabe Noriyuki,Takigawa Tomoyuki,Uotani Koji,Oda Yoshiaki,Misawa Haruo,Tanaka Masato,Ozaki Toshifumi 대한척추외과학회 2022 Asian Spine Journal Vol.16 No.6

Study Design: This is a virtual three-dimensional (3D) imaging study examining computed tomography (CT) data to investigate instrumentation placement.Purpose: In this study, we aim to clarify the ideal entry point and trajectory of the sacral alar iliac (SAI) screw in relationship to the dorsal foramen at S1 and the respective nerve root.Overview of Literature: To the best of our knowledge, there is yet no detailed 3D imaging study on the ideal entry point of the SAI screw. Despite the evidence suggesting that the dorsal foramen at S1 is a landmark on the sacrum, the S1 nerve root disruption is a general concern during the insertion of SAI screws. No other study has been published examining the nerve root location at the S1and SAI screw insertions.Methods: Preoperative CT data from 26 patients pertaining to adult spinal deformities were investigated in this study. We applied a 3D image processing method for a detailed investigation. Virtual cylinders were used to mimic SAI screws. These were placed to penetrate the sacral iliac joint without violating the other cortex. We then assessed the trajectory of the longest SAI screw and the ideal entry point of SAI using a color mapping method on the surface of the sacrum. We measured the location of the nerve root at S1 in relation to the foramen at S1 and the sacral surface.Results: As per the results of our color mapping, it was determined that areas that received high scores are located medially and caudally to the dorsal foramen of S1. The mean angle between a horizontal line and a line connecting the medial edge of the foramen and nerve root at S1 was 93.5°. The mean distances from the dorsal medial edge of the foramen and sacral surface to S1 nerve root were 21.8 mm and 13.9 mm, respectively.Conclusions: The ideal entry point of the SAI screw is located medially and caudally to the S1 dorsal foramen based on 3D digital mapping. It is also shown that this entry point spares the S1 nerve root from possible iatrogenic injuries.

Internal Flow of a Two-Bladed Helical Inducer at an Extremely Low Flow Rate

Watanabe, Satoshi,Inoue, Naoki,Ishizaka, Koichi,Furukawa, Akinori,Kim, Jun-Ho Korean Society for Fluid machinery 2010 International journal of fluid machinery and syste Vol.3 No.2

The attachment of inducer upstream of main impeller is an effective method to improve the suction performance of turbopump. However, various types of cavitation instabilities are known to occur even at the designed flow rate as well as in the partial flow rate region. The cavitation surge occurring at partial flow rates is known to be strongly associated with the inlet back flow. In the present study, in order to understand the detailed structure of internal flow of inducer, we firstly carried out the experimental and numerical studies of non-cavitating flow, focusing on the flow field near the inlet throat section and inside the blade passage of a two bladed inducer at a partial flow rate. The steady flow simulation with cavitation model was also made to investigate the difference of flow field between in the cavitating and no-cavitating conditions.