http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Yoon, Jeoung Seok,Stephansson, Ove,Zang, Arno,Min, Ki-Bok,Lanaro, Flavio Elsevier 2017 International journal of rock mechanics and mining Vol.98 No.-
<P><B>Highlights</B></P> <P> <UL> <LI> A work flow is developed for modelling fault rupture using discrete bonded particle modelling. </LI> <LI> Fault ruptures under various stress condition including future glaciation cycles simulated. </LI> <LI> Fault rupture properties are compared with scaling relations of natural tectonic earthquakes and show good agreement. </LI> </UL> </P>
FRACOD를 이용한 취성 암석의 손상 및 파괴에 대한 경계요소 해석
이희석(Hee-Suk Lee),Baotang Shen,Ove Stephansson 한국암반공학회 2004 터널과지하공간 Vol.14 No.4
응력 증가에 의한 취성 암석의 손상은 미세균열의 개시로부터 시작하여 각 개별 균열들의 전파 및 결합에 의해 거시적인 파괴면을 발생시킨다. 전통적으로 암반의 손상 및 파괴현상을 설명하기위해 거시적인 파괴 기준이나 탄소성 모델과 같은 연속체적인 접근법이 주류를 이루어왔다. 하지만 개별적인 균열들의 개시와 전파 과정을 명시적으로 고려할 수 있다면 현상론적인 관점에서 보다 실제에 가까운 암석 손상 및 파괴 과정을 재현할수 있을 것이다. 본 연구에서는 암석의 균열 진전 모델링을 위해 개발된 경계요소 코드인 FRACOD를 이용하여 암석의 손상 및 파괴 과정을 모사한 결과를 제시한다. 수치일축압축시험을 통해 개발된 모델의 적정성을 검증하고 암반의 치수효과를 고려한 현실적인 암석 파괴 과정을 재현하였다. 또한 이러한 접근법의 적용 사례로서, 실제 굴착이 진행중인 심부 수갱 암반 주변에서 심도와 암반 특성에 따라 균열 진전과 이에 따른 암반 손상의 범위를 예측한 결과를 제시하였다. 이 접근법은 취성도가 큰 암반에서 발생하는 안정성 문제에 대한 공학적인 해법을 찾는데 기여를 할 수 있을 것으로 기대된다. Damage in brittle rock due to stress increase starts from initiation of microcracks, and then results in failure by forming macro failure planes due to propagation and coalescence of these discrete cracks. Conventionally, continuum approaches using macro-failure criteria or a number of elasto-plastic models have been major solution to implement rock damage and failure. However, actual brittle failure processes can be better described in phenomenological approach if initiation and propagation of discrete fractures are explicitly considered. This study presents damage and failure process of rock using a boundary element code, FRACOD, which has been developed to model fracturing process of rocks. Through a series of numerical uniaxial compressive tests, the feasibility of the developed model was verified, and realistic rock failure process was reproduced considering scale effects in rocks. In addition, the fracturing process and the corresponding rock damage in the vicinity of deep shaft in rock mass were presented as an application of this approach. This approach will be expected to contribute to finding better engineering solutions for the analysis of stability problems in brittle rock masses.
K.-B. Min(민기복),O. Stephansson(우베스테판손) 한국암반공학회 2011 터널과지하공간 Vol.21 No.2
균열암반의 역학적 및 수리적 성질에 암반 초기응력이 미치는 영향을 고찰하였다. 지질 데이터는 스웨덴 원전원료 및 방사성 폐기물 관리회사(SKB)에 의해 수행된 포쉬마크지역의 부지조사로부터 획득되었으며 암반균열망-개별요소법 수치실험(Discrete Fracture Network - Discrete Element Method) 을 통하여 암반의 등가역학적 및 등가수리적 물성을 결정하였다. 수치실험결과 균열 강성의 응력의존성, 균열 방향에 따른 상이한 변형거동, 균열거동에 따른 수리유동 경로의 변화 등의 원인에 의하여 등가역학적 및 등가수리적 물성은 응력의존성이 큰 것을 확인하였다. 본 연구의 결과는 암반 초기응력의 정확한 예측이 특정 부지에서의 경계조건으로서뿐만 아니라 균열암반의 역학적 및 수리적 물성을 이해하는 데도 중요한 역할을 한다는 것을 보여준다. The purpose of this study is to demonstrate the effect of in-situ rock stresses on the deformability and permeability of fractured rocks. Geological data were taken from the site investigation at Forsmark, Sweden, conducted by Swedish Nuclear Fuel and Waste Man-agement Company (SKB). A set of numerical experiments was conducted to determine the equivalent mechanical properties (essentially, elastic moduli and Poisson’s ratio) and permeability, using a Discrete Fracture Network-Discrete Element Method (DFN-DEM) approach. The results show that both mechanical properties and permeability are highly dependent on stress because of the hyperbolic nature of the stiffness of fractures, different closure behavior of fractures, and change of fluid pathways caused by deformation. This study shows that proper characterization and consideration of in-situ stress are important not only for boundary conditions of a selected site but also for the understanding of the mechanical and hydraulic behavior of fractured rocks.